Is the chest radiograph a reliable tool in the assessment of tumor response after radiotherapy in nonsmall cell lung carcinoma?

BACKGROUND: The purpose of this study was to evaluate whether the chest radiograph is a reliable tool to assess response to radiotherapy. MATERIALS AND METHODS: Pre- and post-treatment chest radiographs and computed tomographs (CT) of 63 patients with nonsmall cell lung cancer (NSCLC) treated by radiotherapy were reviewed by four observers with regard to suitability for tumor measurement, and response. Suitability for tumor measurement was expressed as the number of measurable diameters. In addition, the consequences to clinical outcome were studied by survival analysis. RESULTS: The CT turned out to be more suited for tumor measurement before as well as after radiotherapy, resulting in an increase of the number of measurable cases. The number of measurable cases with CT was 52 (83%) as compared to 28 (44%) with chest radiography. Especially in case of centrally localized tumors, the presence of an atelectasis, or squamous cell carcinoma, CT contributed to a higher rate of measurable cases. The interobserver agreement with regard to response using chest radiograph was good (mean kappa = 0.74). In 25 of 28 cases (89%) measurable with CT as well as with chest radiograph, response was equally classified. When CT was used, the median survival of the responders was 14.2 months as compared to 6.8 months of the nonresponders. When chest radiograph was used, the median survival of these groups was 12.0 and 6.6 months respectively, which was not significantly different when response was assessed by CT. CONCLUSION: We conclude that CT is more suited for tumor measurement because more measurable lesions can be found and more evaluable lesions on chest radiograph become measurable on CT. The chest radiograph does have a valuable role to play in those lesions that are measurable because of the good interobserver agreement with regard to the response classification, the high overall agreement between CT and chest radiograph in case of measurable cases, and the lack of important differences with regard to survival.     

Strain compensated InGaAs-GaAsP-InGaP laser

The performance characteristics of InGaAs-GaAsP-InGaP strain compensated laser emitting near 1 /spl mu/m are reported. The ridge waveguide lasers have room temperature threshold current of 18 mA and differential quantum efficiency of 0.45 W/A/facet. The linewidth enhancement factor is smaller and gain coefficient is larger for these strain compensated lasers compared to that for conventional strained layer laser. This may be due to higher effective compressive strain in the light emitting layer of these devices which reduces the effective mass. The observed larger gain coefficient is consistent with the measured larger relaxation oscillation frequency of these lasers compared to that for a conventional strained layer laser.     

Simple systolic arrays for discrete cosine transform

in this paper, simple 1-D and 2-D systolic array for realizing the discrete cosine transform (DCT) based on the discrete Fourier transform (DFT) fo an input sequence are presented. The proposed arrays are obtained by a simple modified DFT (MDFT) and an inverse DFT (IDFT) version of the Goertzel algorithm combined with Kung's approach. The 1-D array requiresN cells, one multiplier and takesN clock cycles to produce a completeN-point DCT. The 2-D array takes N clock cycles, faster than the 1-D array, but the area complexity is larger. A continuous flow of input data is allowed and no idle time is required between the input sequences.     

The application of thermal sprayed coatings for pig iron ingot molds

Molds made of gray cast iron for casting pig iron ingots are subjected to severe temperature fluctuations. The main life- limiting factor for mold damage is the formation of surface cracks arising from thermal fa-tigue. Various flame and plasma sprayed coatings were investigated to extend the life of these molds. Coating materials studied include plasma sprayed ceramic coatings with bond coats as well as flame sprayed oxidation- resistant alloy powders. The results of cyclic furnace tests from room temperature to 1100 °C in air, simulating the thermal cycle in casting, indicated that failure occurred along the interface between the bond coat and the gray iron substrate because of iron oxidation, and not at the interface between the ceramic top coat-ing and the bond coating for a superalloy substrate. The field test results indicated that plasma sprayed alumina coatings with 200 μm top coating thickness are the most promising materials for pig iron casting.     

Computer generation of phase diagrams and the associated free energy curves for a binary system

An interactive computer program is introduced in order to make a simultaneous graphical presentation of phase boundaries and their corresponding free energy curves. The program, which uses a graphics display terminal, is a useful tool in teaching thermodynamic concepts involved in phase diagrams, especially for undergraduate students.     

Synthesis and characterization of novel aromatic condensation polymers containing rigid benzoxazole pendent groups

A new aromatic diamine monomer containing benzoxazole substituents was prepared by a multistep synthesis starting from 1,4‐dibromo‐2,5‐difluorobenzene. The diamine was polymerized with commercial aromatic dianhydride or dicarboxylic acid chloride monomers to provide several different poly(amic acid)s and polyamides with their inherent viscosities in the range of 0.24–0.46 dL/g. Thermal properties of these polymers including thermal imidization of poly(amic acid)s into polyimides were investigated by using FTIR, DSC, and TGA. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 178–185, 2004     

Characterization and physical properties of polymethylphenylsilsesquioxane (PMPSQ) and hydroxyl‐functionalized polystyrene (PS–OH) hybrids

Polymethylphenylsilsesquioxane (PMPSQ–OH) and trimethylsilyl end‐blocked PMPSQ (PMPSQ–EC) were prepared. The thermal decomposition behavior of these polymers was studied by thermogravimetric analysis (TGA) and FT‐Raman spectroscopy. Hydroxyl‐functionalized polystyrene (PS–OH) was also prepared by anionic living polymerization. Thin hybrid films of PMPSQ/PS–OH with various blend ratios were obtained by spin‐coating on freshly cleaned glass. The surface morphology of the hybrid films was investigated by atomic force microscopy (AFM). In 80/20 PMPSQ/PS–OH hybrid film, the PS–OH component produced a very uniformly dispersed phase. This hybrid film contained small domains of PS–OH whose size ranged from 60 to 80 nm. As the content of PS–OH was increased, the domain morphology coarsened and phase inversion took place around 50 wt %. In the phase‐inversed system, the PMPSQ‐rich phase was uniformly distributed in the PS–OH‐rich continuous phase. In addition, temperature‐dependent dielectric properties of PMPSQ/PS–OH hybrids were investigated. Relaxation of the hybrids was observed with an increasing content of the PS–OH component due to the amorphous glass transition behavior of PS–OH. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2801–2812, 2003     

Poly(butylene terephthalate)/organoclay nanocomposites prepared by in situ interlayer polymerization and its fiber (II)

Intercalated nanocomposites with poly(butylene terephthalate) (PBT) incorporated between the montmorillonite layers were synthesized from dimethyl terephthalate and 1,4-butane diol by using an in situ interlayer polymerization. The PBT nanocomposites were melt-spun at different organoclay contents to produce monofilaments. The samples were characterized by using wide angle X-ray diffraction, electron microscopy, thermal analysis, and tensile testing. The extent of the clay layer in the PBT was confirmed by using X-ray diffraction and electron microscopy, and the clay layer was found to be highly dispersed on a nanometer scale. The addition of only a small amount of organoclay was enough to improve the thermo-mechanical properties of the PBT hybrid fibers. The hybrids were extruded with various draw ratios (DRs) to examine the tensile mechanical property of the fibers. At DR=1, the ultimate tensile strength of the hybrid fibers increased with the addition of clay up to a critical content and then decreased. However, the initial modulus monotonically increased with increasing amount of organoclay in the PBT matrix. When the DR was increased from 1 to 6, for example, the strength and the initial modulus values of the hybrids containing 3 wt% organoclay decreased linearly.     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007