Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites

Carbon nanotubes (CNTs) have been considered as an ideal reinforcement to improve the mechanical performance of monolithic materials. However, the CNT/metal nanocomposites have shown lower strength than expected. In this study, the CNT reinforced Cu matrix nanocomposites were fabricated by spark plasma sintering (SPS) of high energy ball-milled nano-sized Cu powders with multi-wall CNTs, and followed by cold rolling process. The microstructure of CNT/Cu nanocomposites consists of two regions including CNT/Cu composite region, where most CNTs are distributed, and CNT free Cu matrix region. The stress–strain curves of CNT/Cu nanocomposites show a two-step yielding behavior, which is caused from the microstructural characteristics consisting of two regions and the load transfer between these regions. The CNT/Cu nanocomposites show a tensile strength of 281 MPa, which is approximately 1.6 times higher than that of monolithic Cu. It is confirmed that the key issue to enhance the strength of CNT/metal nanocomposite is homogeneous distribution of CNTs.     

A 60-GHz point-to-multipoint millimeter-wave fiber-radio communication system

A 60-GHz point-to-multipoint wireless access link with data rate of 156 Mb/s incorporating 60-GHz transceiver modules and full-duplex fiber-optic millimeter-wave transmission is developed for short-range applications such as indoor wireless local area networks and intelligent transport systems. For compact system configuration, a small-size millimeter-wave transceiver module with planar antennas is developed. The transceiver module is based on broadband planar integration and packaging of millimeter-wave circuits. The RF output power is +10 dBm and the measured 3-dB antenna beamwidth is 30/spl deg/. The total size of the developed 60-GHz transceiver module, except input and output connectors, is 50 mm /spl times/ 75 mm /spl times/ 35 mm. A point-to-point full duplex fiber-optic configuration is extended to the scheme with multiple access points (APs) by using a tree coupler and a dense wavelength division multiplexing multiplexer. The AP has a simple configuration without frequency conversion. The bit error rate and packet error rate performances of the 60-GHz fiber-radio access link are evaluated. Furthermore, the effect of the extension to the scheme with multiple APs is investigated.     

A miniature UWB planar monopole antenna with 5-GHz band-rejection filter and the time-domain characteristics

A planar monopole antenna with a staircase shape and small volume (25/spl times/26/spl times/1 mm/sup 3/) is proposed in this paper. With the use of a half-bowtie radiating element, the staircase-shape, and a modified ground plane structure, the proposed antenna has a very wide impedance bandwidth measured at about 11.6 GHz (2.9-14.5 GHz, bandwidth ratio about 1:5) below VSWR 2 including the WLAN band notched in the vicinity of 5 GHz. An omnidirectional radiation pattern is obtained. The group delay which is an indication of linearity between two proposed antennas is less than 1 ns. The electrical characteristics in terms of frequency and time domains and physical ones of the proposed antenna make it attractive for use in ultrawideband (UWB) systems.     

Modified atmosphere packaging of fresh produce using microporous earthenware material

Microporous earthenware sheets of 5.5–5.6mm thickness were fabricated with or without a glazing treatment by passing through a sequential firing procedure in a furnace. Their microstructure and gas permeability against oxygen and carbon dioxide were measured and examined for their usability in modified atmosphere packaging of fresh produce. Compared with plastic packaging materials, earthenware sheets with a high proportion of micropores had very high gas permeability and gave CO₂:O₂ permeability ratios close to 1. Glazing treatment smoothed the surface by clogging the pores on the surface and significantly decreased gas permeability, without affecting the internal microstructure of the earthenware. When the earthenware sheet was combined with a plastic box and used in packaging for strawberries and enoki mushrooms at 5°C, its unique permeability properties developed a modified atmosphere that was beneficial for preserving the quality of the produce. Changes in the earthenware's permeability characteristics due to moisture adsorption and condensation need to be resolved so that the dynamic changes occurring in package atmosphere over time can be better understood. Copyright © 2006 John Wiley & Sons, Ltd.     

A routing algorithm for a single transfer crane to load export containers onto a containership

It is discussed how to route transfer crane during loading operation of export containers in port container terminal. We determine the number of containers which transfer crane picks up at each yard-bay as well as the sequence of yard-bays which transfer crane visits during the tour. The objective is to minimize the total container handling time of the transfer crane including the set-up time at each yard-bay and the travel time between consecutive yard-bays. This routing problem is formulated as an integer programming. An efficient optimizing algorithm is also developed for the crane routing problem.     

Hybrid accident simulation methodology using artificial neural networks for nuclear power plants

A hybrid accident simulation methodology for nuclear power plants is proposed to enhance the capabilities of compact simulator by introducing artificial neural networks. Two neural networks are trained with the target values obtained from the analyses of detailed computer codes and trained results are combined with the compact simulator to perform the following roles: (i) compensation for inaccuracies of a compact simulator occurring from simplified governing equation and reduced number of physical control volumes, and (ii) prediction of the critical parameter usually calculated from the sophisticated computer code: the autoassociative neural network improves the computational results of the compact simulator up to the accuracy level of detailed best estimate computer code, while the backpropagation neural network predicts the minimum departure from nucleate boiling ratio (DNBR). Simulations are carried out to verify the applicability of the proposed methodology for the loss of flow accidents and the results show that the neural networks can be used as a complementary tool to improve the results of a compact simulator.     

Disturbance attenuation for constrained discrete-time systems via receding horizon controls

In this note, we propose new receding horizon H/sub /spl infin// control (RHHC) schemes for linear input-constrained discrete time-invariant systems with disturbances. The proposed control schemes are based on the dynamic game problem of a finite-horizon cost function with a fixed finite terminal weighting matrix and a one-horizon cost function with time-varying finite terminal weighting matrices, respectively. We show that the resulting RHHCs guarantee closed-loop stability in the absence of disturbances and H/sub /spl infin// norm bound for 2-norm bounded disturbances. We also show that the proposed schemes can easily be implemented via linear matrix inequality optimization. We illustrate the effectiveness of the proposed schemes through simulations.     

Design of receding horizon controls for constrained time-varying systems

In this note, we propose a generalized stabilizing receding horizon control scheme for input/state constrained linear discrete time-varying systems that improves feasibility and on-line computation on the constrained finite-horizon optimization problem, compared with existing schemes. The control scheme is based on a time-varying horizon cost function with time-varying terminal weighting matrices, which can easily be implemented via linear matrix inequality technique. We discuss modifications of the proposed scheme that improve feasibility or on-line computation time. Through simulation examples, we illustrate the results of these schemes.     

Designing learning objects that afford learners the experience of important variations in Chinese characters

Effective teaching should focus the attention of learners to its essential aspects. It follows that instructional software can be designed in such a way that allows learners to experience the important variations in the critical aspects of the content to be learned. This paper reports on the experience of designing such special kinds of instructional learning objects for the learning of Chinese characters. The design of these learning objects takes into consideration not only what Chinese characters are all about but also how learners commonly make errors while they learn to write the characters. Out of the analysis of these learners' errors, variations in the structural features of Chinese characters were pulled out and embodied in the design of the learning objects. Learners tinkering with the learning objects can thus implicitly develop a sense of the structural features or regularity of Chinese characters, which most importantly should prepare the learners to learn more new characters in the future. The main proposal of this paper is the notion of this variation‐affording instructional software that allows learners to attend to the essential aspects of what is to be learned. Furthermore, the idea of the learning object also differs from other instructional software in its small, self‐contained and reusable nature, such that teachers can flexibly embed the learning objects into their own teaching materials.     

A Multivariate T2 Control Chart for Skewed Populations Using Weighted Standard Deviations

This paper proposes a heuristic method of constructing multivariate T² control charts for skewed populations based on ‘weighted standard deviations’, obtained by decomposing the standard deviation into upper and lower deviations according to the direction and degree of skewness. The proposed method adjusts the variance–covariance matrix of quality characteristics and modifies the ellipsoidal probability density function contour of the multivariate normal distribution to a shape similar to that of the skewed distribution. False alarm rates and out‐of‐control average run lengths of the proposed control chart are compared with those of the standard control chart for multivariate lognormal, Weibull and gamma distributions, and the results show that considerable improvement over the standard method can be achieved when the distribution is skewed. Copyright © 2003 John Wiley & Sons, Ltd.