Engineering a pharmacologically superior form of leptin for the treatment of obesity

Leptin plays a central role in the homeostasis of body weight through its regulatory effects on appetite and energy expenditure, yet in trials as a therapeutic agent for the treatment of obesity in humans it has been disappointing. The poor clinical efficacy of leptin results from its short circulating half-life, low potency and poor solubility, necessitating large and frequent doses to obtain even modest clinical benefit. Engineered Fc-leptin immunofusins, consisting of the Fc fragment of an immunoglobulin gamma chain followed by leptin, exhibit improved pharmacological properties with very consistent and potent biological activities. Furthermore, in extending the circulating half-life of the protein in vivo from a few minutes for leptin to many hours for Fc-leptin, these proteins have the potential to reduce drastically the dosage and frequency of administration required to obtain clinical benefit. The results of this study show that the engineered leptin immunofusins described here have significantly enhanced pharmacological properties in comparison with the recombinant leptin that was used in clinical trials. As such, they could represent an important step towards a therapeutically superior form of leptin if the disappointing performance of leptin in early clinical trials was due to its poor pharmacological properties rather than any conceptual weakness in the strategy of using leptin for the treatment of obesity and its related disorders.     

Laser densification of organic coating: Effects of laser wavelength,operating parameters and substrate properties

Mechanical bonding and interface behaviour play a key role for any materials deposited on different substrates. Usually, a post-spray heat treatment is required to improve the coating morphology and to enhance mechanical properties of thermal-sprayed polymeric coating. The effects of YAG, CO₂ and diode laser radiations on as-sprayed PEEK coating deposited on stainless steel and aluminum substrates were investigated. The results revealed a good coating densification and interface behavior. A correlation between coating and substrate absorption coefficients, their thermophysical properties and laser operating parameters was shown. Besides, the finite element modeling based on IR temperature measurements during diode laser irradiation demonstrated that the densification of organic coating occurs above its melting point.     

Modeling of a continuous rotary reactor for carbon nanotube synthesis by catalytic chemical vapor deposition

The modeling of carbon nanotube production by the CCVD process in a continuous rotary reactor with mobile bed was performed according to a rigorous chemical reaction engineering approach. The geometric, hydrodynamic, physical and physicochemical factors governing the process were analyzed in order to establish the reactor equations. While the study of the hydrodynamic factor suggests a co‐current plug‐flow approximation, the physical factor mainly deals with the phenomena of transport and the transfer of mass, which can be neglected. Concerning the physicochemical factor, the modeling is based on knowledge of the expression of the initial reaction rate, and takes into account catalytic deactivation as a function of time, according to a sigmoid decreasing law. The reactor modeling allows obtaining the evolution of partial pressure, carbon nanotube production and catalytic deactivation along the reactor for given initial operating conditions. The comparison between experimental and calculated production highlights a very good fit of data. © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Polyethylene nanocomposites based on intercalation of N-alkyl amines within KTiNbO5 structure

This article describes the synthesis of nanostructured organic/inorganic hybrid materials based on the modification of the titanoniobate oxide KTiNbO₅ by N-alkyl amines via an acido-basic reaction. X-ray diffraction and scanning electron microscopy have showed the successful intercalation of the organic molecules between the inorganic layers. The hybrid nanofillers previously obtained have been incorporated in a polyethylene matrix by melt intercalation. The morphology and thermomechanical properties of the nanocomposites have been investigated. It has been revealed that the modification of the oxide improves the dispersion and the exfoliation in the matrix leading to an increase of Young's modulus and of the degradation temperature. The TEM observations coupled with EDS mapping is revealed to be one interesting mean of characterization for this study.     

Growth of Dense Single Crystals of Potassium Sodium Niobate by a Combination of Solid-State Crystal Growth and Hot Pressing

(K_0.5Na_0.5)NbO₃ (KNN) is a potential lead-free replacement for Pb(Zr, Ti)O₃ (PZT) piezoceramics, but its piezoelectric properties are inferior to those of PZT. By growing single crystals of KNN, it may be possible to improve the piezoelectric properties. Recently, single crystals of KNN were grown by the solid-state crystal growth (SSCG) method, but the crystals were very porous. In this paper, a method of growing dense single crystals by SSCG in a hot press will be described. (110)-oriented single seed crystals of KTaO₃ were buried in KNN powder, with 0.5 mol% of K₄CuNb₈O₂₃ added as a sintering aid. After consolidation by uniaxial and isostatic pressing, the tablets were hot pressed in a two-stage treatment. During hot pressing, dense single crystals of KNN grew using the KTaO₃ seed crystal as a template. The effect of hot pressing on single crystal growth will be discussed.     

Cytotoxic Potential of a-Azepano- and 3-Amino-3,4-SeCo-Triterpenoids

Semi-synthetic triterpenoids, holding an amino substituted seven-membered A-ring (azepano-ring), which could be synthesized from triterpenic oximes through a Beckmann type rearrangement followed by a reduction of lactame fragment, are considered to be novel promising agents exhibiting anti-microbial, alpha-glucosidase, and butyrylcholinesterase inhibitory activities. In this study, in an attempt to develop new antitumor candidates, a series of A-ring azepano- and 3-amino-3,4-seco-derivatives of betulin, oleanolic, ursolic, and glycyrrhetinic acids were evaluated for their cytotoxic activity against five human cancer cell lines and non-malignant mouse fibroblasts by means of a colorimetric sulforhodamine assay. Azepanoallobetulinic acid amide derivative 11 was the most cytotoxic compound of this series but showed little selectivity between the different human tumor cell lines. Flow cytometry experiments showed compound 11 to act mainly by apoptosis (44.3%) and late apoptosis (21.4%). The compounds were further screened at the National Cancer Institute towards a panel of 60 cancer cell lines. It was found that compounds 3, 4, 7, 8, 9, 11, 15, 16, 19, and 20 showed growth inhibitory (GI₅₀) against the most sensitive cell lines at submicromolar concentrations (0.20–0.94 μM), and their cytotoxic activity (LC₅₀) was also high (1–6 μM). Derivatives 3, 8, 11, 15, and 16 demonstrated a certain selectivity profile at GI₅₀ level from 5.16 to 9.56 towards K-562, CCRF-CEM, HL-60(TB), and RPMI-8226 (Leukemia), HT29 (Colon cancer), and OVCAR-4 (Ovarian cancer) cell lines. Selectivity indexes of azepanoerythrodiol 3 at TGI level ranged from 5.93 (CNS cancer cell lines SF-539, SNB-19 and SNB-75) to 14.89 for HCT-116 (colon cancer) with SI 9.56 at GI₅₀ level for the leukemia cell line K-562. The present study highlighted the importance of A-azepano-ring in the triterpenic core for the development of novel antitumor agents, and a future aim to increase the selectivity profile will thus lie in the area of modifications of azepano-triterpenic acids at their carboxyl group.     

Refining Genotypes and Phenotypes in KCNA2-Related Neurological Disorders

Pathogenic variants in KCNA2, encoding for the voltage-gated potassium channel K_v1.2, have been identified as the cause for an evolving spectrum of neurological disorders. Affected individuals show early-onset developmental and epileptic encephalopathy, intellectual disability, and movement disorders resulting from cerebellar dysfunction. In addition, individuals with a milder course of epilepsy, complicated hereditary spastic paraplegia, and episodic ataxia have been reported. By analyzing phenotypic, functional, and genetic data from published reports and novel cases, we refine and further delineate phenotypic as well as functional subgroups of KCNA2-associated disorders. Carriers of variants, leading to complex and mixed channel dysfunction that are associated with a gain- and loss-of-potassium conductance, more often show early developmental abnormalities and an earlier onset of epilepsy compared to individuals with variants resulting in loss- or gain-of-function. We describe seven additional individuals harboring three known and the novel KCNA2 variants p.(Pro407Ala) and p.(Tyr417Cys). The location of variants reported here highlights the importance of the proline(405)–valine(406)–proline(407) (PVP) motif in transmembrane domain S6 as a mutational hotspot. A novel case of self-limited infantile seizures suggests a continuous clinical spectrum of KCNA2-related disorders. Our study provides further insights into the clinical spectrum, genotype–phenotype correlation, variability, and predicted functional impact of KCNA2 variants.     

Influence of pressure and dwell time on pressure-assisted sintering of calcium cobaltite

Calcium cobaltite Ca₃Co₄O₉, abbreviated Co349, is a promising thermoelectric material for high-temperature applications in air. Its anisotropic properties can be assigned to polycrystalline parts by texturing. Tape casting and pressure-assisted sintering (PAS) are a possible future way for a cost-effective mass-production of thermoelectric generators. This study examines the influence of pressure and dwell time during PAS at 900°C of tape-cast Co349 on texture and thermoelectric properties. Tape casting aligns lentoid Co349. PAS results in a textured Co349 microstructure with the thermoelectrically favorable ab-direction perpendicular to the pressing direction. By pressure variation during sintering, the microstructure of Co349 can be tailored either toward a maximum figure of merit as required for energy harvesting or toward a maximum power factor as required for energy harvesting. Moderate pressure of 2.5 MPa results in 25% porosity and a textured microstructure with a figure of merit of 0.13 at 700°C, two times higher than the dry-pressed, pressureless-sintered reference. A pressure of 7.5 MPa leads to 94% density and a high power factor of 326 µW/mK² at 800°C, which is 11 times higher than the dry-pressed reference (30 MPa) from the same powder.     

Characterizing SERCA Function in Murine Skeletal Muscles after 35–37 Days of Spaceflight

It is well established that microgravity exposure causes significant muscle weakness and atrophy via muscle unloading. On Earth, muscle unloading leads to a disproportionate loss in muscle force and size with the loss in muscle force occurring at a faster rate. Although the exact mechanisms are unknown, a role for Ca²⁺ dysregulation has been suggested. The sarco(endo)plasmic reticulum Ca²⁺ ATPase (SERCA) pump actively brings cytosolic Ca²⁺ into the SR, eliciting muscle relaxation and maintaining low intracellular Ca²⁺ ([Ca²⁺]_i). SERCA dysfunction contributes to elevations in [Ca²⁺]_i, leading to cellular damage, and may contribute to the muscle weakness and atrophy observed with spaceflight. Here, we investigated SERCA function, SERCA regulatory protein content, and reactive oxygen/nitrogen species (RONS) protein adduction in murine skeletal muscle after 35–37 days of spaceflight. In male and female soleus muscles, spaceflight led to drastic impairments in Ca²⁺ uptake despite significant increases in SERCA1a protein content. We attribute this impairment to an increase in RONS production and elevated total protein tyrosine (T) nitration and cysteine (S) nitrosylation. Contrarily, in the tibialis anterior (TA), we observed an enhancement in Ca²⁺ uptake, which we attribute to a shift towards a faster muscle fiber type (i.e., increased myosin heavy chain IIb and SERCA1a) without elevated total protein T-nitration and S-nitrosylation. Thus, spaceflight affects SERCA function differently between the soleus and TA.