Dielectric and Thermal Investigations on PbNb2O6 in Pure Piezoelectric Phase and Pure Non-Piezoelectric Phase

A high piezoelectric transition temperature is indicated for present orthorhombic samples of lead meta-niobate (PbNb₂O₆) by the high value of the temperature (T_m) at which the real part (?′) of electrical permittivity peaks. It is 573 to 580°C. The imaginary component (?″) increases sharply at these temperatures. Cooling run after heating to 700°C gives changed values of ?′ and ?″ and T_m. Present work reports impedance spectroscopy (up to 700°C over 20 Hz to 5.5 MHz) and Differential Scanning Calorimetry or DSC on the pure orthorhombic phase, and, for the first time, on the pure rhombohedral phase. DSC shows an endothermic dip across T_m during heating and an exothermic peak during cooling for the orthorhombic sample only.     

New observations in micro-pop-in issues in nanoindentation of coarse grain alumina

The present experiments were focused on nanoindentation behaviour and the attendant “micro-pop-in” in a dense (～95% of theoretical) coarse-grain (～20 μm) alumina ceramic as a function of loading rate variations at three constant peak loads in the range of 10⁵–10⁶ μN. Based on the experimental results here we report for the first time, to the best of our knowledge, an increase in intrinsic nano scale contact resistance as well as the nanohardness with the loading rate. These observations were explained in terms of the correlation between the nanoscale plasticity and shear stress active just underneath the nanoindenter.     

Applicability of time-of-flight-based ground and multispectral aerial imaging for grapevine canopy vigour monitoring under direct root-zone deficit irrigation

ABSTRACT

This study investigates the applicability of ground-based 3D time-of-flight (ToF) imaging and small unmanned aerial system (UAS) integrated multispectral imaging as a rapid grapevine canopy vigour mapping tool for decision support during crop production management. Direct root-zone deficit irrigation was applied to grapevines with continuous and pulse irrigation techniques at 15%, 30%, and 60% rates as that of standard irrigation rate (100%) established by the grower in a commercial production. The control block was irrigated continuously at 100% standard irrigation rate. Field plots were imaged using ground platform integrated with 3D ToF imaging sensor and small UAS-integrated multispectral camera at 128 and 65 days before the harvest to estimate the canopy vigour variability associated with irrigation treatments. Customized as well as standard methods (convex hull and voxel grid) were utilized to extract canopy attributes (e.g. volume) from the 3D ToF imaging sensor data. The multispectral images were processed to extract normalized and green normalized difference vegetation index images. Resulting data were used to estimate canopy area ratio i.e. the ratio between the grapevine canopy area with respect to the total area in selected region of interest. A significant correlation (r = 0.34) between canopy volume estimated by customized algorithm and aerial canopy area ratio was observed. Custom canopy volume estimates were also highly correlated (r = 0.79) with voxel grid derived canopy volume data. Overall, 60% continuous direct root zone deficit irrigation appeared to produce canopy volume/vigour comparable with those under control treatment. Results also suggest that grower can utilize either or both (ground and aerial) grapevine canopy mapping techniques for effective management.     

Design of a PLL with improved locking range and its biomedical applications

This paper describes a phase locked loop employing a low voltage VCO using modified ECL inverter cells. The VCO circuit employed, features a positive feed back scheme to improve the operating frequency. The phase detector used in the PLL also uses a positive feedback scheme to improve the locked range and to reduce supply voltage of operation of the entire circuit. An improvement of locked range of around 35% was obtained from circuit simulation (using PSPICE) as well as from practical circuit, using discrete components. The minimum supply voltage required here is 2.5 volts. Some biomedical applications of this PLL are also proposed.     

Loading Rate Effect on Nanohardness of Soda-Lime-Silica Glass

To understand how hardness, the key design parameter for applications of brittle solids such as glass concerning contact deformation, is affected by loading rate variation, nanoindentation with a Berkovich tip was used to measure the nanohardness of a 330-μm-thick soda-lime-silica glass as a function of loading rate (1 to 1000 mN·s⁻¹). The results showed for the very first time that, with variations in the loading rate, there was a 6 to 9 pct increase in the nanohardness of glass up to a threshold loading rate (TLR), whereafter it did not appreciably increase with further increase in loading rate. Further, the nanohardness data showed an indentation size effect (ISE) that obeyed the Meyer’s law. These observations were explained in terms of a strong shear stress component developed just beneath the nanoindenter and the related shear-induced deformation processes at local microstructural scale weak links. The significant or insignificant presence of shear-induced serrations in load depth plots and corresponding scanning electron microscopic evidence of a strong or mild presence of shear deformation bands in and around the nanoindentation cavity supported such a rationalization. Finally, a qualitative picture was developed for different deformation processes induced at various loading rates in glass.     

Investigation of terminalia (Terminalia belerica Robx.) seed oil as prospective biodiesel source for North-East India

Terminalia (Terminalia belerica Robx.) is available in the northeastern region of India. The fruit of terminalia has some medicinal value and its kernel contains 43% oil. The prospect of terminalia oil for biodiesel production is investigated with reference to some relevant properties. The fatty acid profile of oil extracted from terminalia is found comparable with similar seed oils attempted for biodiesel production in this region. Terminalia oil contains 32.8% palmitic acid, 31.3% oleic acid, and 28.8% linoleic acid. The calorific value and kinematic viscosity of terminalia oil are 37.50 MJ/kg and 25.60 cSt, respectively. The calorific value and cetane number of terminalia FAME are within the acceptable limit of the EN 14214 standard. However, the flash point of terminalia FAME (90 °C) is relatively lower than the minimum required standard. Overall, the properties of biodiesel obtained from terminalia seed conform to the existing biodiesel standard. In addition to assisting the national biodiesel mission, the extension and regeneration of forest areas through terminalia planting would help us to curb the seemingly irreversible trend of de-forestation in the northeast region of India.     

The electro-adsorption chiller: a miniaturized cooling cycle with applications to micro-electronics

A novel modular and miniature chiller is proposed that symbiotically combines adsorption and thermoelectric cooling devices. The seemingly low efficiency of each cycle individually is overcome by an amalgamation with the other. This electro-adsorption chiller incorporates solely existing technologies. It can attain large cooling densities at high efficiency, yet is free of moving parts and comprises harmless materials. The governing physical processes are primarily surface rather than bulk effects, or involve electron rather than fluid flow. This insensitivity to scale creates promising applications in cooling personal computers and other microelectronic appliances.     

A unified scheme for adaptive stroke-based rendering

This paper presents a comprehensive scheme for automatically generating a broad class of artistic illustrations from photographs. Using strokes as the major building blocks, our system optimizes the stroke attributes subject to the desired rendering style. The stroke attributes are computed adaptively to enable importance-based control of the abstraction level at each pixel. We propose a novel outline detection and refinement paradigm called edge painting to construct an outline map, and from which to derive the pixel-wise importance. We also introduce an adaptive bilateral filter to adaptively guide the curved stroke directions based on the importance map. Given the outline, importance, and direction maps, the system creates the illustration via selecting the representative colors, setting the style parameters, and optimizing the stroke attributes based on simulated annealing. The experimental results show that our scheme facilitates automatic production of artistic illustrations in a wide range of rendering styles.