Viscosity of Iron Oxide Aluminosilicate Melts

Metallurgical and Materials Transactions B - A structure-based viscosity model has been developed for the CaO-MgO-FeO-SiO2-Al2O3 system and its subsystems. A critical analysis of the experimental...     

Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.     

Theoretical Investigation of Waste Heat Recovery from an IC Engine Using Vapor Absorption Refrigeration System and Thermoelectric Converter

This study proposes the preliminary simulation of a single cylinder spark ignition engine with waste heat recovery system. To harvest waste heat energy from the engine exhaust a thermoelectric generator coupled to a vapor absorption refrigeration (VAR) system was proposed in this simulation work. Parametric simulation of engine, thermoelectric generator and VAR using thermodynamic relations was carried out in MATLAB – Simulink software. An attempt has been made mathematically to integrate engine, thermoelectric generator and VAR system to study the effect of engine load, speed, equivalence ratio on thermoelectric output and coefficient of performance (COP) of a VAR system. In this study, the VAR system runs by taking heat energy from the exhaust gas and the electric power produced by a thermoelectric generator was utilized to run the pump of the refrigeration system. It was found that COP of the absorption refrigeration system depends on engine load, speed and air fuel equivalence ratio. The study also reveals that about 10% to 15% of the total exhaust energy can be harvested using this system.     

Crushing analysis of braced metal rings using the equivalent structure technique

This paper presents a development of the equivalent structure technique to account for some of the effects of strain-hardening in structures undergoing plastic bending. The lateral compression of symmetrically deforming braced rings is analysed and the results compared with corresponding experimental data. The effects of strain-hardening on the analytical results both in the small deformation post-collapse régime and at large deformations prior to the onset of unstable deformations are discussed.     

Modulatory Effects of Biosynthesized Gold Nanoparticles Conjugated with Curcumin and Paclitaxel on Tumorigenesis and Metastatic Pathways—In Vitro and In Vivo Studies

Background: Breast cancer is the most common cancer in women globally, and diagnosing it early and finding potential drug candidates against multi-drug resistant metastatic breast cancers provide the possibilities of better treatment and extending life. Methods: The current study aimed to evaluate the synergistic anti-metastatic activity of Curcumin (Cur) and Paclitaxel (Pacli) individually, the combination of Curcumin–Paclitaxel (CP), and also in conjugation with gold nanoparticles (AuNP–Curcumin (Au-C), AuNP–Paclitaxel (Au-P), and AuNP–Curcumin–Paclitaxel (Au-CP)) in various in vitro and in vivo models. Results: The results from combination treatments of CP and Au-CP demonstrated excellent synergistic cytotoxic effects in triple-negative breast cancer cell lines (MDA MB 231 and 4T1) in in vitro and in vivo mouse models. Detailed mechanistic studies were performed that reveal that the anti-cancer effects were associated with the downregulation of the expression of VEGF, CYCLIN-D1, and STAT-3 genes and upregulation of the apoptotic Caspase-9 gene. The group of mice that received CP combination therapy (with and without gold nanoparticles) showed a significant reduction in the size of tumor when compared to the Pacli alone treatment and control groups. Conclusions: Together, the results suggest that the delivery of gold conjugated Au-CP formulations may help in modulating the outcomes of chemotherapy. The present study is well supported with observations from cell-based assays, molecular and histopathological analyses.     

Performance and emission characteristics of a Kirloskar HA394 diesel engine operated on fish oil methyl esters

The high viscosity of fish oil leads to problem in pumping and spray characteristics. The inefficient mixing of fish oil with air leads to incomplete combustion. The best way to use fish oil as fuel in compression ignition (CI) engines is to convert it into biodiesel. It can be used in CI engines with very little or no engine modifications. This is because it has properties similar to mineral diesel. Combustion tests for methyl ester of fish oil and its blends with diesel fuel were performed in a kirloskar H394 DI diesel engine, to evaluate fish biodiesel as an alternative fuel for diesel engine, at constant speed of 1500 rpm under variable load conditions. The tests showed no major deviations in diesel engine's combustion as well as no significant changes in the engine performance and reduction of main noxious emissions with the exception on NO_x. Overall fish biodiesel showed good combustion properties and environmental benefits.     

Electrochemical synthesis of hexagonal closed pack nickel: A hydrogen storage material

An in situ hydrogen generation and storage technique is demonstrated during the electrodeposition of hexagonal closed pack (HCP) nickel from NiCl₂-1-ethyl-3-methylimidazolium chloride (NiCl₂-EmimCl) and NiCl₂·6H₂O-1-ethyl-3-methylimidazolium chloride (NiCl₂·6H₂O-EmimCl) melts. During electrolysis, the dissolution of hydrogen in nickel takes place due to the electrolysis of water. This results in the production of HCP nickel. The hydrogen content of the electrodeposited nickel from NiCl₂-EmimCl was found to be 1.2 wt.%. Thermal analysis showed that the phase transformation from HCP nickel to FCC occurred at 462 °C, releasing hydrogen in the process.     

Rare earth metal Gd influenced defect sites in N doped TiO2: Defect mediated improved charge transfer for enhanced photocatalytic hydrogen production

In this experimental studies, we report the synthesis of TiO₂ co-doped by both cationic and anionic sites by simple sol-gel based method. All the prepared samples exhibit the anatase crystalline morphology however, showed lattice distortion caused by the displacement of Ti⁴⁺ sites by Gd³⁺. The improved visible absorption is witnessed by the Gd and N co-doping with an assured redshift in the absorption edge. The N and Gd displacement inside TiO₂ lattice accompanied by the creation of OTiN and GdOTi bonds are characterized by the X-ray photoelectron spectra. The strong resonance signal by Gd4f electrons in the electron paramagnetic resonance spectroscopy further substantiate the displacement of lattice cites of TiO₂ by Gd³⁺ ions. The longevity of the photo produced charges observed in fluorescence spectra of Gd and N co-doped TiO₂ is because of the effective transfer of charges to the defect sites. The aforementioned catalysts are tested for their capacity for the H₂ production from water splitting. The 2 wt% gadolinium and nitrogen co-doped TiO₂ has shown 10764 μmol g^?1 H₂ production which is 26 times higher than the commercial Degussa P-25 catalyst. The enhanced activity for hydrogen production can be attributed to factors such as increased absorptivity under visible light and effective charge carrier separation.