Alternate Testing of RF Transceivers Using Optimized Test Stimulus for Accurate Prediction of System Specifications

In the recent past, with the emergence of System-on-Chip (SoC), focus has shifted towards testing system specifications rather than device or module specifications. While the problem of test accessibility for test stimulus application and response capture for such high-speed systems remains a challenge to the test engineers, new test strategies are needed which can address the problem in a practical manner. In this paper, the problem of testing the transmitter and the receiver subsystems of a RF transceiver for system level specification is addressed. Instead of using different conventional test stimuli for testing each of the system level specifications of RF subsystems, a specially crafted test stimulus is used for testing all the specifications from the response of the subsystem-under-test. A new simulation approach has also been developed to perform fast behavioral simulations in frequency domain for the system-under-test. In the test method, frequency domain test response spectra are captured and non-linear regression models are constructed to map the spectral measurements onto the specifications of interest. In the presented simulation results, the test stimuli have been validated using netlist level simulation of the subsystem-under-test and specifications have been predicted within an error of ±3% of the actual value.Soumendu Bhattacharya was born in Calcutta, India, in 1978. He received his Bachelors degree from Indian Institute of Technology, Kharagpur, India, in 2000. In 2002, he received the M.S.E.E. degree in electrical engineering from Georgia Institute of Technology, Atlanta, USA. He is currently working toward his Ph.D. degree. In the summer of 2001, he worked as a summer intern in National Semiconductor, Santa Clara, CA, USA. His research interests are in the area of test generation for mixed-signal and RF circuits and systems and design-for-test.Achintya Halder received the B.S. degree in electronics and electrical communication engineering from the Indian Institute of Technology, Kharagpur, in 1998. He worked as an IC design engineer with Texas Instruments until 2000. Currently, he is a Ph.D. student and a research assistant with the School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta. His research area is analog/RF and mixed signal testing.Ganesh P. Srinivasan received the B.E. degree in Electronics and Communication Engineering from the National Institute of Technology and Science, University of Madras, Chennai (Madras), India, in 2002. He received the M.S. degree in Electrical and Computer engineering from the Georgia Institute of Technology, Atlanta, GA, in 2004 and is currently pursuing his Ph.D. degree in Electrical and Computer Engineering at the Georgia Institute of Technology, Atlanta, GA. His research interests include low cost testing approaches for analog/RF and mixed-signal circuits, and improving performance of low cost testers for enabling high quality tests.Abhijit Chatterjee received the Bachelor of Technology degree in electrical engineering from the Indian Institute of Technology, Kanpur, India, in 1981, the M.S. degree in electrical engineering and computer science from University of Illinois at Chicago in 1983 and the Ph.D. degree in electrical and computer engineering from the University of Illinois at Urbana-Champaign in 1990. Until December 1992, he was a Research Staff Member at the General Electric Research and Development Center in Schenectady, NY. His work has been cited by the Wall Street Journal and presented on a Japanese network TV program called High Tech Shower International. He is a collaborating partner in NASAs New Millennium Project. Dr. Abhijit Chatterjee is also the author of one U.S. patent and has over one hundred publications in referenced journals and conferences.     

Performance Analysis of WDM Optical Networks with Wavelength Usage Constraint

Due to power considerations, it is possible that not all wavelengths available in a fiber can be used at a given time. In this paper, an analytical model is proposed to evaluate the blocking performance of wavelength-routed optical networks with and without wavelength conversion where the usable wavelengths in a fiber is limited to a certain maximum number, referred to as wavelength usage constraint. The effect of the wavelength usage constraint is studied on ring and mesh-torus networks. It is shown that the analytical model closely approximates the simulation results. We also evaluate the performance of the first-fit wavelength assignment algorithm and compare its performance with the random wavelength assignment algorithm through simulation. It is observed that increasing the total number of wavelengths in a fiber is an attractive alternative to wavelength conversion when the number of usable wavelengths in a fiber is maintained the same.     

Production and properties of crude enterotoxin of Pseudomonas aeruginosa

Pseudomonas aeruginosa CTM-3 was found to be the most potentially enteroxigenic strain out of the 12 isolates recovered from milk, as a high fluid length ratio, i.e. F/L (1.1) in rabbit gut and a strong permeability response in rabbit skin (38.5 mm² necrotic zone) was obtained with this culture. No clear-cut relationship between the two tests was observed. Six of the ethidium bromide (300 μg/ml) cured variants of this culture completely lost their ability to produce enterotoxin indicating the possible involvement of a plasmid in enterotoxin synthesis. The crude enterotoxin from P. aeruginosa CTM-3 was completely inactivated in 15 s at 72°C. However, it was fairly stable at pH values in the range 4.5–7.5. Both pepsin and trypsin inactivated the enterotoxin activity at a concentration of 40 μg/ml. Organic acids, formalin and hydrogen peroxide had no significant effect on the enterotoxin activity. The need for further investigations with purified preparations is emphasized.     

A dynamic call admission scheme for VBR traffic in ATM networks

The role of call admission control (CAC) in high-speed networks is to maintain the network utilization at a high level, while ensuring that the quality of service (QoS) requirements of the individual calls are met. We use the term static CAC to describe schemes that always allocate the same bandwidth to a specific group of multiplexed calls, independent of the other traffic sharing the link. Dynamic CAC, on the other hand, denotes a scheme in which the bandwidth allocation to a group of calls sharing a queue is influenced by the traffic in other queues destined for the same outgoing link. We propose a generic dynamic call admission scheme for VBR and ABR traffic whose aim is to reduce the blocking rate for VBR calls at the expense of a higher blocking rate for ABR calls. Our scheme is generic because it builds up on a pre-existing static scheme, e.g., one based on a simple notion of effective bandwidth. Our simple approach results in a significant reduction of the blocking rate for VBR traffic (several orders of magnitude), if the bandwidth requirements of a single call are a reasonably small fraction of the link capacity. At the same time, the deterioration of service for ABR traffic can be contained. This revised version was published online in August 2006 with corrections to the Cover Date.     

Microwave binstability in a planar ferrite-piezoelectric resonator

Bistability in a planar resonator containing an iron-yttrium garnet ferrite film and a lead zirconate titanate (PZT) plate is studied. The characteristics of the bistable resonator are measured in a frequency band of 0.8–16 GHz at an excitation power level ranging from 1 to 20 mW. Magnetic and electric tuning of the resonator frequency and switching of the resonator between stable states with the use of weak magnetic (∼0.5 Oe) and electric (0.75 kV/cm) fields are demonstrated. It is shown that, as the excitation power increases, the resonator’s switching time decreases from ∼1.7 to ∼0.3 μs.     

IPS-MAC: an informative preamble sampling MAC protocol for wireless sensor networks

Radio transceivers are the main source of energy consumption in wireless sensor networks (WSNs) where the source of energy supply is non-rechargeable battery. Several MAC protocols have been proposed in order to efficiently conserve energy in the link layer via duty-cycling. Low power listening (LPL) methods have been shown to outperform other schemes in lightly loaded situations which are common in environment monitoring applications. Nonetheless, as the network becomes dense, in LPL protocols such as BMAC a large number of nodes stay awake for each transmission, resulting in high levels of energy consumption. This paper introduces the informative preamble sampling (IPS) protocol in which a transmitter implicitly embeds information about its intended receiver via the power at which the preamble is transmitted. This results in far fewer nodes staying awake for each preamble. Upon hearing the preamble, a receiver executes a decision-making algorithm to decide whether to stay awake. If the decision-making algorithm is too lax, then more nodes stay awake following the preamble. On the other hand if the algorithm is too strict, it is likely that the intended receiver misses the preamble. In this paper we derive the optimal operating points for the IPS protocol. We show analytically that the IPS protocol can achieve a gain in energy by at least a factor of 2 over BMAC. We also conduct extensive simulations to show that IPS can achieve significant energy gains compared to BMAC.     

Scheduling sensor activity for information coverage of discrete targets in sensor networks

In this paper, we study the problem of scheduling sensor activity to cover a set of targets with known locations such that all targets can be monitored all the time and the network can operate as long as possible. A solution to this scheduling problem is to partition all sensors into some sensor covers such that each cover can monitor all targets and the covers are activated sequentially. In this paper, we propose to provide information coverage instead of the conventional sensing disk coverage for target. The notion of information coverage is based on estimation theory to exploit the collaborative nature of geographically distributed sensors. Due to the use of information coverage, a target that is not within the sensing disk of any single sensor can still be considered to be monitored (information covered) by the cooperation of more than one sensor. This change of the problem settings complicates the solutions compared to that by using a disk coverage model. We first define the target information coverage (TIC) problem and prove its NP‐completeness. We then propose a heuristic to approximately solve our problem. Simulation results show that our heuristic is better than an existing algorithm and is close to the upper bound when only the sensing disk coverage model is used. Furthermore, simulation results also show that the network lifetime can be significantly improved by using the notion of information coverage compared with that by using the conventional definition of sensing disk coverage. Copyright © 2008 John Wiley & Sons, Ltd.     

Influence of Abrasive Properties on Residual Stresses in Lapped Ferrite and Alumina

The effect of abrasive-particle properties on surface-finishing residual stresses, surface finish, and material removal rates during the lapping of ferrite and aluminium oxide is quantified experimentally. It is shown that lapping with softer abrasives and smaller particles results in lower compressive residual stresses near the surface and improved surface finish. These results demonstrate possible methods for controlling surface finishing residual stresses in ceramics while at the same time achieving dimensional accuracy.     

Mechanical characterization of a bituminous mix under quasi-static and high-strain rate loading

There are various methods to determine the compressive and tensile strength of asphalt concrete under static loading conditions and most studies on asphalt strength and fracture have been conducted under such loading conditions. However, pavement materials also have to withstand a wide variety of loading and temperature conditions which may vary from quasi-static to high-strain rate impact, and pavement breakdown may occur due to fracture and/or fatigue failure. In the present study, a bituminous mix with 30% RAP has been characterized under quasi-static (10^?3–10^?4 strain/s) and high-strain rate (200–700 strain/s) regimes. The experimental studies have been performed to better understand the compressive, tensile and fracture response of bituminous mixes. Split Hopkinson pressure bar (SHPB) and its modifications were used for high-strain rate characterization of this bituminous mixture. It was observed that the mechanical properties of the hot mix asphalt (HMA) changed significantly under high-strain rate testing. Also, the failure mechanisms observed under the high-strain rate loading were found to be considerably different from those obtained in static testing, where failure of binder was a predominant mechanism. It was observed that high-strain rate loading caused trans-aggregate failures in the specimens; in addition to failure of the binder.     

Hydrogen permeation during zinc-manganese alloy plating

Electrodeposition of metals from solution is usually accompanied by the simultaneous discharge of hydrogen ions or water molecules. When hydrogen is liberated at an iron/steel surface during electrodeposition, a portion of the hydrogen is absorbed by the metal surface and then diffuses into the interior. The diffused hydrogen produces some detrimental effects, such as reduction in ductility and loss in mechanical strength, leading to hydrogen embrittlement. The present paper reports investigations on hydrogen permeation measurements in zinc-manganese alloy deposition using a modified electrode clamp for easy removal and fixing of the electrode. Hydrogen permeation studies indicate that the porosity of the deposit increases in the following order:Zn-Mn(14.3%), Zn-Mn(2.4%), Zn-Mn(24.8%) and Zn-Mn(37.5%).This is in agreement with the corrosion data obtained which indicates that Zn-Mn alloy deposits with low manganese content show better performance than pure zinc deposits.