Dielectric behaviour of hot pressed AlN ceramic exposed to inorganic acid vapours

Dielectric behaviour of hot pressed AIN ceramic is studied before and after exposing the samples to inorganic acid (HCl and HNO₃) vapours with a specific aim to study the effect of these vapours on the dielectric constant () and dissipation factor (tan ). Four samples having different volume percentage of porosity (0.2 to 15%) are selected for this study. Dielectric dispersion increases after exposing the samples to the above acid vapours. Tan also increases quite appreciably; the increase being more at higher porosity. Recovery studies show that the exposure effect is reversible. The exposure time dependence of and tan indicates that these parameters show a maxima at a particular exposure time. However, no such maxima is observed in the gravimetric measurements. The increase in dielectric parameters after exposure to acid vapours is explained in terms of the ionic conduction due to the dissociation of these vapours in the presence of moisture. The porosity dependence of this effect is discussed in terms of closed and open porosity reported by other workers.     

Investigation of multiple heterogeneous relationships using a q-rung orthopair fuzzy multi-criteria decision algorithm

Neural Computing and Applications - Q-rung orthopair fuzzy (q-ROF) set is one of the powerful tools for handling the uncertain multi-criteria decision-making (MCDM) problems, various MCDM methods...     

Use of AgInTe2 for optoelectronic switching at higher frequencies

A possible application of AgInTe₂ for optoelectronic switching is reported. Alternating and direct current (a.c. and d.c.) response of the material has been studied over a wide frequency range (5 Hz to 1 MHz) through measurements of conductance, capacitance and photocurrent at different temperature and illumination levels. The switching/recovery time has been analysed in terms of time constant and found to be of the order of microseconds for this material. Higher frequencies of operation (>40 kHz) are preferable because, at such frequencies, becomes almost independent of illumination level and temperature. Furthermore, the switching speed can be conveniently controlled with d.c. bias applied across the sample. Elliott's CBH model has been satisfactorily used to explain the switching behaviour for AgInTe₂.     

Correlation of burst pressure of GRP cylinders with the stress wave factor

Glass fibre-reinforced plastic (GRP) cylinders are increasingly used for highly stressed structural elements. The higher the demands on the materials, the higher are the fault detection requirements to be met by non-destructive materials testing methods. Acousto-ultrasonics is a valuable aid for the non-destructive evaluation of GRP composite materials, because it may be the answer to evaluating effects of subtle defects in composites. The aim of the research is to evaluate the burst pressure of GRP cylinders by acousto-ultrasonics techniques. The theoretical results have been found to be in good agreement with the experimental values. Hence the results strongly suggest that stress wave factor measurements can be exploited successfully to predict burst pressure of GRP cylinders.Nomenclature P Internal pressure, kgf cm^–2 - d Internal diameter, cm - t Thickness of cylinder, cm - (N ,N ,N ) Resultant forces, kgf - (M ,M ,M ) Moments, kg cm - [A] Extensional stiffness matrix - [B] Bending stretching coupling matrix - [D] Flexural stiffness matrix - ( ⁰ , ⁰ , ⁰ ) Midplane strains - (k ,k ,k ) Curvatures - n Number of laminae - Z Distance from midplane, cm - _u Ultimate tensile strength of GRP composite, kg cm^–2 - S _W Stress wave factor - m Material parameter - Filament winding angle     

Effect of laser irradiation on the electrical properties of amorphous germanium films

Amorphous films of germanium were grown using a vacuum evaporation technique, on glass substrates kept at room temperature. As-grown films were irradiated with Q-Switched Nd-YAG laser pulses (=1.06 m, 20nsec, 10 to 50Jcm^–2). The d.c. conductivity measurements were made in the temperature range 77 to 300 K. It was observed that the effect of laser irradiation was similar to the effect caused by the thermal annealing of the films. The d.c. conductivity data were analysed in the light of Mott's theory of a variable range hopping conduction process.     

Barium ferrite: Preparation by liquid mix technique and its characterization

Barium ferrite has been prepared by a novel non-conventional preparation method known as the liquid mix technique which involves the preparation of citrates of the metals concerned. The decomposition of the citrates indicated a gradual transition from an amorphous material to a crystalline phase leading to the formation of barium ferrite at 600° C as indicated by the X-ray diffraction and Mössbauer measurements. Submicrometre-sized particles of the ferrite could be obtained directly on decomposition of the citrates, thus avoiding the milling or grinding operations normally employed to reduce the particles to the size required for obtaining good magnetic properties. The best properties (coercivity and remanence) were obtained for the ferrite sintered around 990° C.     

On the synthesis and characterization of a new manganite type CMR material: La0.7Hg0.3MnO3

A new manganite type CMR material, La_0.7Hg_0.3MnO₃ has been successfully synthesized and has been found to exhibit magnetoresistance (≈9%) at low fields (≈1.5 kG). The synthesis has been carried out through a solid state reaction route consisting of the formation of La_0.7MnO₃ followed by diffusion of Hg leading to La_0.7Hg_0.3MnO₃. The as grown samples are polycrystalline and correspond to an orthorhombic unit cell with the lattice parameters; a=5.5183 Å, b=5.6383 Å and c=7.5368 Å. The typical grain size as revealed by scanning electron microscopy is in the range of 0.5–2 μm. The ρ–T behaviour shows a peak at T_IM=227 K. The ρ–T behaviour above this temperature corresponds to that of an insulator and below this to that of a metal. The ρ–T behaviour remains unaltered when a magnetic field (H_dc=1.5 kG) is applied. However, with this magnetic field a drop in the resistivity is observed up to 77 K. At room temperature the magnetoresistance ratio (MRR) is too small but it steadily increases as the temperature is decreased. Thus, MRRs at 227.13 and 77 K are 3.41 and 9.05%, respectively, in an applied field of H_dc=1.5 kG. At a given temperature the variation in MRR with field H_dc is rapid at lower field values (H_dc<1.2 kG) and scales linearly for higher field values (H_dc>1.2 kG). It may be mentioned that the present work on the synthesis and magnetoresistance behaviour of La_0.7Hg_0.3MnO₃, is the first of its type.     

Ionic liquid mediated nano-composite polymer gel electrolyte for rechargeable battery application

ABSTRACT

Nano-composite polymer gel electrolytes (NPGEs) based on polymer poly(vinylidene fluoride-co-hexafluoropropylene) PVdF-HFP, ionic liquid, 1-butyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide BMIMTFSI, Li-salt along with the addition of SiO₂ nanoparticles have been synthesized and characterized by various techniques. Prepared NPGEs show high room temperature ionic conductivity (~10^?3 S/cm) and have a wide electrochemical window (ECW) (~3.3–3.5 V). The galvanostatic charge/discharge profile was studied by sandwiching best performing NPGEs between a LiFePO₄ cathode and lithium metal anode. The specific discharge capacity of the cell (Li/NPGE/LiFePO₄) room temperature at 0.1C rate is found to be 138 mAh/g.     

Quantification of response time in poly(vinyl alcohol)–metal complex thermochromic polymeric systems

Thermochromic poly(vinyl alcohol) (PVA)‐based material was synthesized and an extensive study of its thermochromic behavior with respect to response time was carried out. It was observed that it is possible to manipulate the response time by keeping control over chemical and physical parameters. The response time, which is the most important property of a smart material, has in this case been found to be very much influenced by rate of heat transfer into the material. Different compositions of the thermochromic material and their corresponding response time with respect to rate of heat transfer were studied and correlated. First, a theoretical equation was derived and later on it was experimentally verified to quantify the response time in PVA–metal complex‐based thermochromic systems. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4832–4834, 2006     

Rubber–clay nanocomposite by solution blending

Ethylene vinyl acetate rubber (45% vinyl acetate content, EVA‐45) and organomodified clay (12Me‐MMT) composites were prepared by solution blending of the rubber and the clay. A combination of X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy studies showed that the composites obtained are on the nanometer scale. The measurements of the dynamic mechanical properties for different compositions over a temperature range (?100 to +100°C) showed that the storage moduli of these rubber–clay nanocomposites are higher above the glass to rubber transition temperature compared to the neat rubber. The tensile strength of the nanocomposites is about 1.6 times higher than that of the EVA‐45. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2216–2220, 2003