Characterizing hydrocyclone performance for grit removal from wastewater treatment activated sludge plants

Typically, 15–45% of the mixed liquor (sludge) in biological wastewater treatment plants (WWTPs) consists of inorganic (fixed) suspended solids. A portion of these inorganic compounds is grit (sand) originating from the influent. Grit accumulation impacts WWTP design and operating costs as these unbiodegradable solids reduce the effective treatment capacity of the bioreactor and other unit operations that must be sized to carry this material.The goal of this study was to characterize the performance of a hydrocyclone to selectively separate grit from activated sludge. Laboratory experiments were conducted with a 13 mm diameter Krebs hydrocyclone treating sludge from eight WWTPs. Reduced efficiencies of 17 ± 7% on fixed suspended solids and 9 ± 6% on volatile suspended solids were obtained. Grade efficiency curves enabled the development of a modified definition for cut size useful for this application. The characterization of hydrocyclone performance for grit removal from activated sludge will enable modelling of the process for integration into wastewater treatment simulators used for process performance prediction and design.     

Possible role of hydrogen sulphide gas in self-heating of pyrrhotite-rich materials

Self-heating of sulphides poses safety, environmental and economic concerns to the mining and metallurgical industries, especially when sulphide ores or concentrates have to be stored or transported. The first target of this investigation is the self-heating of pyrrhotite (Po), the most commonly suspected mineral to trigger the phenomenon because of its fast oxidation in moist air. Following a standard experimental protocol, self-heating was assessed on samples of Po mixed with sand as an inert material. With increasing Po content, self-heating rates progressively increased but the samples visually appeared less and less oxidized. A high Po content, it was hypothesized, may give a more reducing environment favouring formation of hydrogen sulphide (H₂S). The presence of this gas could be significant for self-heating for several reasons which are discussed. The hypothesis was tested by including copper pieces to detect the gas by forming copper sulphide, and adding copper sulphate in excess which suppressed self-heating, apparently by reacting with and removing the gas.     

Untersuchungen zur Dauerfestigkeit carbonitrierter Proben aus den Einsatzstählen 18CrNiMo7‐6und 20MnCr5

The endurance limit of carbonitrided specimens of 18CrNiMo7‐6 and 20MnCr5 case hardening steels were examined under bending conditions. Four variants were manufactured differing in heat treatment and surface conditions. Besides conventional gas carburised variants, carbonitrided specimens with a low and a raised nitrogen content of 0.2 and 0.45% at the surface as well as a carbonitrided and ground variant were examined. The specimens were tested with stress ratios R = –1 and 0. Depending on the nitrogen content cyclic loading evokes compressive residual stresses at the specimens' surfaces, caused by elastic‐plastic deformation. Specimens of the ground variant show additionally a decrease of the residual austenite content when cycled. The induced compressive residual stresses are substantially responsible for high endurance limits at both stress ratios and are the key for understanding the beneficial effect of carbonitriding in this regard.     

Elastomeric Electronic Skin for Prosthetic Tactile Sensation

This report demonstrates a wearable elastomer‐based electronic skin including resistive sensors for monitoring finger articulation and capacitive tactile pressure sensors that register distributed pressure along the entire length of the finger. Pressure sensitivity in the order of 0.001 to 0.01 kPa^?1 for pressures from 5 to 405 kPa, which includes much of the range of human physiological sensing, is achieved by implementing soft, compressible silicone foam as the dielectric and stretchable thin‐metal films. Integrating these sensors in a textile glove allows the decoupling of the strain and pressure cross‐sensitivity of the tactile sensors, enabling precise grasp analysis. The sensorized glove is implemented in a human‐in‐the‐loop system for controlling the grasp of objects, a critical step toward hand prosthesis with integrated sensing capabilities.     

A study of high-boiling alkylbenzene fractions as synthetic lubricants for refrigerators

The properties of synthetic oils based on high-boiling alkylbenzenes - good low temperature behaviour, thermo-oxidative, anticorrosive and hydrolylic stability, make them suitable candidates as lubricating oils for refrigerator machinery. This paper reports the results of investigations by column adrorption chromatography and GC-MS into the nature and properties of three high boiling alkylbenzene fractions, and their behaviour when compounded into candidate refrigerator oils.     

Biosynthetic Plasticity Enables Production of Fluorinated Aurachins

Enzyme promiscuity has important implications in the field of biocatalysis. In some cases, structural analogues of simple metabolic building blocks can be processed through entire pathways to give natural product derivatives that are not readily accessible by chemical means. In this study, we explored the plasticity of the aurachin biosynthesis pathway with regard to using fluoro- and chloroanthranilic acids, which are not abundant in the bacterial producers of these quinolone antibiotics. The incorporation rates of the tested precursor molecules disclosed a regiopreference for halogen substitution as well as steric limitations of enzymatic substrate tolerance. Three previously undescribed fluorinated aurachin derivatives were produced in preparative amounts by fermentation and structurally characterized. Furthermore, their antibacterial activities were evaluated in comparison to their natural congener aurachin D.     

pH- and heat-induced structural changes of bovine α-lactalbumin in response to oleic acid binding

Bovine α-lactalbumin (α-LA) is able to interact with fatty acids, resulting in structural changes that are potentially responsible for the HAMLET/BAMLET role. Different states of α-LA induced by pH, temperature and fatty acid binding have been examined. Evidences of the structural changes of α-LA in molten globule and native states in correlation with oleic acid (OA) binding are shown using fluorescence spectroscopy and in silico approach. In addition, the α-LA was subjected to automated docking analysis, to better understand the interaction with oleic acid, using the PatchDock algorithm. The experimental results demonstrate a more flexible conformation of the protein at pH 2.5 when compared to neutral pH, thus facilitating the oleic acid binding to α-LA. The quenching experiments indicate the remarkable increase in the content of molten globule state at pH 2.5 and a more compact and rigid structure for α-LA–OA complexes at pH 7.0. The docking results are consistent with the experimental data concerning the thermal stability of the α-LA–OA complex. α-LA in different conformations/complexes was sensitive to pH and temperature. Several different molecular species induced by pH, heat treatment and oleic acid binding were suggested. The structure of the protein was more flexible at acidic pH, therefore favoring the hydrophobic exposure.