Thermal Fatigue Behavior of Thick and Porous Thermal Barrier Coatings Systems

High-temperature thermal fatigue causes the failure of thermal barrier coating (TBC) systems. This paper addresses the development of thick TBCs, focusing on the microstructure and the porosity of the yttria partially stabilized zirconia (YPSZ) coating, regarding its resistance to thermal fatigue. Thick TBCs, with different porosity levels, were produced by means of a CoNiCrAlY bond coat and YPSZ top coat, both had been sprayed by air plasma spray. The thermal fatigue resistance of new TBC systems and the evolution of the coatings before and after thermal cycling was then evaluated. The limit of thermal fatigue resistance increases depending on the amount of porosity in the top coat. Raman analysis shows that the compressive in-plane stress increases in the TBC systems after thermal cycling, nevertheless the increasing rate has a trend which is contrary to the porosity level of top coat. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

Untersuchungen zur Charakterisierung des Mischsystems Sojaöl/epoxidiertes Sojaöl mittels FTIR/h-ATR-Spektroskopie

Characterization of Soybean Oil/Epoxidised Soybean Oil Mixtures by FTIR/h-ATR-Spectroscopy Controlling of technical production process requires a rapid method of analysis. This article describes a Fourier transform-infrared/horizontal attentuated total reflectance (FTIR/h-ATR) method to determine the iodine value and the degree of epoxidation in binary mixtures of soybean oil and epoxidised soybean oil. This analytical method will also be tested regarding the chemical reaction of epoxidation of soybean oil.     

New adhesion measurement technique for coated cutting tool materials

Adhesion properties of wear resistant coatings on cutting tool materials are essential to their performance in technical applications. It is therefore necessary to characterize the coating adhesion by an appropriate measurement technique which reveals both critical adhesion values as well as information on time dependent debonding. In particular, a quantitative and reproducible technique is required rather than largely qualitative methods such as indent or scratch tests. In addition, for multilayer coatings, the location of the weakest interface is required to facilitate improvement of interfacial integrity. Accordingly a sandwich double cantilever beam (DCB) test was developed and used to measure the adhesion properties of coatings on cermets. Additionally, the structure of the coatings in the as fabricated state and after mechanical testings were characterized by optical microscopy, SEM and TEM. With quantitative adhesion measurements and investigations of the interface microstructure, a comprehensive characterization of coating adhesion on cutting toolmaterials was achieved.     

Phase relationships in the systems RE2O3-Al2O3-SiO2 (RE = rare earth element, Y, and Sc)

A literature survey and recent results on phase relationships in the quasi-ternary systems RE₂O₃-Al₂O₃-SiO₂ are given. The investigated systems exhibit extended ternary solid solutions, RE_9.33+2x(Si_{1_x}Al_xO₄)₆O₂ (withx up to ~0.33) and/or RE₄Al_{2(1_X)}Si_2xO_9+x (withx up to ~0.3), which are based on the quasi-binary phases RE_9.33(SiO₄)₆O₂ and RE₄A1₂O₉, respectively. The former is encountered only in systems with laige RE³⁺ ions (e.g., La³⁺), whereas the latter is found in systems with small RE³⁺ ions (e.g., Yb³⁺); in systems with medium-sized KE³⁺ ions (e.g., Gd³⁺) both types exist Quasi-ternary compounds are known only in the La, Ce, and Sc systems. Severe discrepancies in reported ternary eutectic temperatures led to a need for their accurate redeteimination.     

Photoelectrochemical study of passive films on aluminum

Photocurrent spectroscopy and Photoelectrochemical Laser Imaging (PECLI) were performed on passive films on aluminum. Cathodic photocurrents were measured between 2.7 and 6.9 eV. Photoelectrochemical laser images of the oxide covered aluminum surface were recorded in the presence of non-corroding (no Cl⁻) and corroding (Cl⁻) electrolyte.     

Toward time-resolved soft X-ray microscopy using pulsed fs-high-harmonic radiation

Coherent soft X-ray sources open the way to new capabilities in high-resolution imaging, site- and element-specific spectroscopy and biomicroscopy. In this paper we demonstrate imaging with a table-top soft X-ray microscope. By combining a laser driven high-harmonic light source, optimized for having the maximum brightness at around 100 eV, a pair of multilayer mirrors to select a narrow spectral band and acting simultaneously as a condenser and a Fresnel zone plate as microscope objective, we were able to resolve 200 nm structures of a diatom sample. Further, the pulsed nature of our X-ray source offers the possibility of time-resolved spectromicroscopy with a temporal resolution in the order of a few femtoseconds.     

MICROSTRUCTURE AND EXTENDED SOLID SOLUBILITY OF Tb IN RAPIDLY SOLIDIFIED Ag-Tb ALLOY

The 0,05—0.08 mm thick splat foils of Ag-Tb alloy,containing Tb up to 10 at.-%,were made by the hammer-anvil technique.The cooling rate was in order of 10~6 K/s.The metastable extension of solid solubility of Tb in the alloy was measured to be up to 5 at.-% by lattice parameter method.The secondary phase in metastable eutectic structure was identi- fied as Ag_3Tb from diffraction pattern.The microstructure and micro-defect in as-quenched Ag-Tb splat foil were also observed.     

ADVANCE IN Ti_3 Al AND TiAl INTERMETALLICS RESEARCH IN CISRI

ＡＤＶＡＮＣＥＩＮＴｉ_３ＡｌＡＮＤＴｉＡｌＩＮＴＥＲＭＥＴＡＬＬＩＣＳＲＥＳＥＡＲＣＨＩＮＣＩＳＲＩＺＨＯＮＧＺｅｎｇｙｏｎｇ；ＺＯＵＤｕｎｘｕ；ＬＩＳｈｉｑｉｏｎｇ（ＣｅｎｔｒａｌＩｒｏｎａｎｄＳｔｅｅｌＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅ，Ｂｅｉ?..     

Classroom ventilation and indoor air quality—results from the FRESH intervention study

Inadequate ventilation of classrooms may lead to increased concentrations of pollutants generated indoors in schools. The FRESH study, on the effects of increased classroom ventilation on indoor air quality, was performed in 18 naturally ventilated classrooms of 17 primary schools in the Netherlands during the heating seasons of 2010–2012. In 12 classrooms, ventilation was increased to targeted CO₂ concentrations of 800 or 1200 ppm, using a temporary CO₂ controlled mechanical ventilation system. Six classrooms were included as controls. In each classroom, data on endotoxin, β(1,3)‐glucans, and particles with diameters of <10 μm (PM₁₀) and <2.5 μm (PM_2.5) and nitrogen dioxide (NO₂) were collected during three consecutive weeks. Associations between the intervention and these measured indoor air pollution levels were assessed using mixed models, with random classroom effects. The intervention lowered endotoxin and β(1,3)‐glucan levels and PM₁₀ concentrations significantly. PM₁₀ for instance was reduced by 25 μg/m³ (95% confidence interval 13–38 μg/m³) from 54 μg/m³ at maximum ventilation rate. No significant differences were found between the two ventilation settings. Concentrations of PM_2.5 and NO₂ were not affected by the intervention. Our results provide evidence that increasing classroom ventilation is effective in decreasing the concentrations of some indoor‐generated pollutants.