An Experimental Workflow for Studying Barrier Integrity,Permeability, and Tight Junction Composition and Localization in a Single Endothelial Cell Monolayer: Proof of Concept

Endothelial and epithelial barrier function is crucial for the maintenance of physiological processes. The barrier paracellular permeability depends on the composition and spatial distribution of the cell-to-cell tight junctions (TJ). Here, we provide an experimental workflow that yields several layers of physiological data in the setting of a single endothelial cell monolayer. Human umbilical vein endothelial cells were grown on Transwell filters. Transendothelial electrical resistance (TER) and 10 kDa FITC dextran flux were measured using Alanyl-Glutamine (AlaGln) as a paracellular barrier modulator. Single monolayers were immunolabelled for Zonula Occludens-1 (ZO-1) and Claudin-5 (CLDN5) and used for automated immunofluorescence imaging. Finally, the same monolayers were used for single molecule localization microscopy (SMLM) of ZO-1 and CLDN5 at the nanoscale for spatial clustering analysis. The TER increased and the paracellular dextran flux decreased after the application of AlaGln and these functional changes of the monolayer were mediated by an increase in the ZO-1 and CLDN5 abundance in the cell–cell interface. At the nanoscale level, the functional and protein abundance data were accompanied by non-random increased clustering of CLDN5. Our experimental workflow provides multiple data from a single monolayer and has wide applicability in the setting of paracellular studies in endothelia and epithelia.     

Designing oligomeric ethylene terephtalate building blocks by chemical recycling of polyethylene terephtalate

The intelligent recycling of plastics waste is a major concern. Because of the widespread use of polyethylene terephtalate, considerable amounts of PET waste are generated that are ideally re‐introduced into the material cycle by generating second generation products without loss of materials performance. Chemical recycling methods are often expensive and entail environmentally hazardous by‐products. Established mechanical methods generally provide materials of reduced quality, leading to products of lower quality. These drawbacks can be avoided by the development of new recycling methods that provide materials of high quality in every step of the production cycle. In the present work, oligomeric ethylene terephthalate with defined degrees of polymerization and defined molecular weight is produced by melt‐mixing PET with different quantities of adipic acid as an alternative pathway of recycling PET with respect to conventional methods, offering ecofriendly and economical aspects. Additionally, block‐copolyesters of defined block length are designed from the oligomeric products. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39786.     

Thermochemical stability of Fe- and co-functionalized perovskite-type SrTiO3 oxygen transport membrane materials in syngas conditions

The materials typically used for oxygen transport membranes, Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ (BSCF) and La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF) tend to decompose due to their low thermochemical stability under reducing atmosphere. Fe- and Co-doped SrTiO₃ (SrTi_1-x-yCo_xFe_yO_3-δ, x + y ≤ 0.35) (STCF) materials showing an oxygen transport comparable to LSCF have great potential for application in ion-transport-devices. In this study, the thermochemical stability of pure perovskite-structured STCF was investigated after annealing in a syngas atmosphere at 600–900 °C. The phase composition of the materials after annealing was characterized by means of X-ray diffraction (XRD). The thermodynamic activities of SrO, FeO, and CoO in the STCF materials were evaluated using Knudsen effusion mass spectrometry (KEMS). Co-doped SrTiO₃ (STC) materials were not stable after annealing in the syngas atmosphere above 5 mol% Co-substitution. Ruddlesden-Popper-like phases and SrCO₃ were detected after annealing at 600 °C. In contrast, Fe substitution (STF) showed good stability after annealing in syngas upto 35 mol% substitution.     

Variation of poly(vinylidene fluoride) morphology due to radial cold flow in a flexible pipe

A subsea flexible pipe containing isotropic poly(vinylidene fluoride) (PVDF) layers is subjected to rapid decompression after being put in pressurized equilibrium with a fluid containing supercritical CO₂. The PVDF layers have flowed radially into gaps of adjacent metallic coils forming whitened noses. Microbeam small‐angle X‐ray scattering (SAXS) scanning reveals a considerable morphological gradient in the polymer layers. PVDF layers (inner: wear, outer: barrier) in two zones (undamaged and damaged) are scanned. Far from noses and damage zone, the samples are isotropic without voids. Their morphological parameters are determined and compared to virgin material. Approaching the noses, the structure turns into highly oriented microfibrils perpendicular to the local flow into the gaps. Here, voids extend parallel to the microfibrils. At edges of the metallic structure, they turn more perpendicular to the layer. Crystallite orientation extends out to both sides of the whitened nose regions, but in the undamaged samples, tilting of the orientation direction and void‐formation are restricted to the white regions: successive mechanisms of cold drawing are mapped into space. Under the damaged spot, voids and crystallite orientation extend through the entire layer. POLYM. ENG. SCI., 55:2869–2877, 2015. © 2015 Society of Plastics Engineers     

Synthesis and thermal,mechanical and gas permeation properties of aromatic polyimides containing different linkage groups

Two series of aromatic polyimides containing various linkage groups based on 2,7‐bis(4‐aminophenoxy)naphthalene or 3,3′‐dimethyl‐4,4′‐diaminodiphenylmethane and different aromatic dianhydrides, namely 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride), 4,4′‐(hexafluoroisopropylidene)bis(phthalic anhydride), 3,3′,4,4′ benzophenonetetracarboxylic dianhydride, 9,9‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]fluorene dianhydride and 4,4′‐(4,4′‐hexafluoroisopropylidenediphenoxy)bis(phthalic anhydride), were synthesized and compared with regard to their thermal, mechanical and gas permeation properties. All these polymers showed high thermal stability with initial decomposition temperature in the range 475–525 °C and glass transition temperature between 208 and 286 °C. Also, the polymer films presented good mechanical characteristics with tensile strength in the range 60–91 MPa and storage modulus in the range 1700–2375 MPa. The macromolecular chain packing induced by dianhydride and diamine segments was investigated by examining gas permeation through the polymer films. The relationships between chain mobility and interchain distance and the obtained values for gas permeability are discussed. © 2014 Society of Chemical Industry     

Effect of hydrolyzed collagen on thermal,mechanical and biological properties of poly(lactic acid) bionanocomposites

Iranian Polymer Journal - Bionanocomposites based on poly(lactic acid) (PLA), plasticized with commercial tributyl o-acetyl citrate (ATBC) and containing hydrolyzed collagen (HC) up to...     

Trans-Splicing Improvement by the Combined Application of Antisense Strategies

Spliceosome-mediated RNA trans-splicing has become an emergent tool for the repair of mutated pre-mRNAs in the treatment of genetic diseases. RNA trans-splicing molecules (RTMs) are designed to induce a specific trans-splicing reaction via a binding domain for a respective target pre-mRNA region. A previously established reporter-based screening system allows us to analyze the impact of various factors on the RTM trans-splicing efficiency in vitro. Using this system, we are further able to investigate the potential of antisense RNAs (AS RNAs), presuming to improve the trans-splicing efficiency of a selected RTM, specific for intron 102 of COL7A1. Mutations in the COL7A1 gene underlie the dystrophic subtype of the skin blistering disease epidermolysis bullosa (DEB). We have shown that co-transfections of the RTM and a selected AS RNA, interfering with competitive splicing elements on a COL7A1-minigene (COL7A1-MG), lead to a significant increase of the RNA trans-splicing efficiency. Thereby, accurate trans-splicing between the RTM and the COL7A1-MG is represented by the restoration of full-length green fluorescent protein GFP on mRNA and protein level. This mechanism can be crucial for the improvement of an RTM-mediated correction, especially in cases where a high trans-splicing efficiency is required.     

Heißgasfiltration im Synthesegas aus Biomasse

During thermochemical conversion of biological material in a fluidized bed reactor the nutrients are remaining as dust in the product gas. Hot gas filtration represents a possibility to recover these minerals. The characteristics of this gas add up new technical tasks. The following article gives an account of long lasting experience of operation and optimization in a pilot plant.