Activation of Ni/A12O3 catalysts through modification of the Al2O3 support

The effect of alumina pretreatment on the performance of alumina supported nickel catalysts was demonstrated in gas phase hydrogenation of toluene to methylcyclohexane. The state of the alumina was changed from pure to pure phase through various heat treatments in air. The catalysts were prepared from vapor phase by saturating the accessible binding sites on the pretreated alumina with the nickel precursor. The highest number of active sites for hydrogenation was observed for catalysts prepared on alumina having an incomplete phase transition and a / alumina phase ratio between 0.5 and 10. Results from temperature programmed desorption (TPD) studies revealed that a maximum in weakly chemisorbed hydrogen as well as in total amount of desorbed hydrogen was found for the same catalysts. By hydrogen chemisorption studies the total hydrogen uptake was found to correlate with the observed hydrogenation maximum. It is suggested that both the chemical and physical properties of the alumina influence the activity. An optimal metal-support interaction and structural defects on the alumina due to the phase transition can explain the observed maximum in the number of active sites and in hydrogen uptake.     

Towards language-to-language transformation

This paper proposes a simplicity-oriented approach and framework for language-to-language transformation of, in particular, graphical languages. Key to simplicity is the decomposition of the transformation specification into sub-rule systems that separately specify purpose-specific aspects. We illustrate this approach by employing a variation of Plotkin’s Structural Operational Semantics (SOS) for pattern-based transformations of typed graphs in order to address the aspect ‘computation’ in a graph rewriting fashion. Key to our approach are two generalizations of Plotkin’s structural rules: the use of graph patterns as the matching concept in the rules, and the introduction of node and edge types. Types do not only allow one to easily distinguish between different kinds of dependencies, like control, data, and priority, but may also be used to define a hierarchical layering structure. The resulting Type-based Structural Operational Semantics (TSOS) supports a well-structured and intuitive specification and realization of semantically involved language-to-language transformations adequate for the generation of purpose-specific views or input formats for certain tools, like, e.g., model checkers. A comparison with the general-purpose transformation frameworks ATL and Groove, illustrates along the educational setting of our graphical WebStory language that TSOS provides quite a flexible format for the definition of a family of purpose-specific transformation languages that are easy to use and come with clear guarantees.

     

Correction to: How to model and prove hybrid systems with KeYmaera: a tutorial on safety

International Journal on Software Tools for Technology Transfer -     

Studying Fluid Characteristics Atop Surface Patterned Membranes via Particle Image Velocimetry

Surface patterning is a recent promising approach to promote performance of pressure-driven membranes in water treatment and desalination. Nevertheless, knowledge about foulant deposition mechanisms, especially at early stage of filtration, is still lacking. The applicability of particle imaging velocimetry to study fluid characteristics atop surface patterned thin-film composite membranes was investigated at different operating conditions. This work is an important first step toward reliable understanding of the impacts of topographical membrane surface modification on hydrodynamic conditions and foulant deposition mechanisms.     

Surface Modification of Ready-to-Use Hollow Fiber Ultrafiltration Modules for Oil/Water Separation

Reusing wastewater from oil-related industries is becoming increasingly important, especially in water-stressed oil-producing countries. Before oily wastewater can be discharged or reused, it must be properly treated, e.g., by membrane-based processes like ultrafiltration. A major issue of the applied membranes is their high fouling propensity. This paper reports on mitigating fouling inside ready-to-use ultrafiltration hollow-fiber modules used in a polishing step in oil/water separation. For this purpose, in-situ polyzwitterionic hydrogel coating was applied. The membrane performance was tested with oil nano-emulsions using a mini-plant system. The main factors influencing fouling were systematically investigated using statistical design of experiments.     

Tetranorsesquiterpenoids as Attractants of Yucca Moths to Yucca Flowers

Journal of Chemical Ecology - The obligate pollination mutualism between Yucca and yucca moths is a classical example of coevolution. Oviposition and active pollination by female yucca moths occur...     

Flexible Furnace Concepts for Vacuum Heat Treatment Combined with High-pressure Gas Quenching

IN the past five years the process combination of vacuum hardening, respectively vacuum carburizing with high-pressure gas quenching was successfully introduced to the market, especially in the manufacture of gears. In the meantime furnace concepts for various applications are available to the industry. In the following report three plant varieties are introduced, which differ in process flexibility and throughput. This report also explains criteria for the selection of a furnace in view of the existing application requirements. Besides this a short introduction is given into the vacuum carburizing process and the high-pressure gas quenching technology.     

Production of niobium powder by magnesiothermic reduction of niobium oxides in a cyclone reactor

In the last years, a variety of processes respectively process steps have been investigated for the production of niobium powder. This is due to the fact that niobium capacitors could be a viable alternative to tantalum capacitors from a performance, availability, and price point of view. The reduction of niobium pentoxide by magnesium results in fine powders with high specific surface area but has the disadvantages of a very exothermic nature and the formation of magnesium niobate. It is shown in this work that the application of a continuously operating cyclone reactor and the use of niobium(IV) oxide as raw material solve these problems. A good control of the highly exothermic reaction within the cyclone reactor was achieved in the cyclone reactor by the ratio between gas flow rate and powder flow rate as well as by a proper preheating of the gas.     

Siamese multi-layer perceptrons for dimensionality reduction and face identification

This paper presents a framework using siamese Multi-layer Perceptrons (MLP) for supervised dimensionality reduction and face identification. Compared with the classical MLP that trains on fully labeled data, the siamese MLP learns on side information only, i.e., how similar of data examples are to each other. In this study, we compare it with the classical MLP on the problem of face identification. Experimental results on the Extended Yale B database demonstrate that the siamese MLP training with side information achieves comparable classification performance with the classical MLP training on fully labeled data. Besides, while the classical MLP fixes the dimension of the output space, the siamese MLP allows flexible output dimension, hence we also apply the siamese MLP for visualization of the dimensionality reduction to the 2-d and 3-d spaces.     

Moving loads on flexible structures presented in the floating frame of reference formulation

The introduction of moving loads in the Floating Frame of Reference Formulation is presented. We derive the kinematics and governing equations of motion of a general flexible multibody system and their extension to moving loads. The equivalence of convective effects with Coriolis and centripetal forces is shown. These effects are measured numerically and their significance in moving loads traveling at high speed is confirmed. A method is presented to handle discontinuities when moving loads separate from the flexible structure. The method is extended from beam models to general flexible structures obtained by means of the Finite Element Method. An interpolation method for the deformation field of the modal representation of these bodies is introduced.The work is concluded by application of the method to modern mechanical problems in numerical simulations.