A reduced integration solid‐shell finite element based on the EAS and the ANS concept—Large deformation problems

In this paper we address the extension of a recently proposed reduced integration eight‐node solid‐shell finite element to large deformations. The element requires only one integration point within the shell plane and at least two integration points over the thickness. The possibility to choose arbitrarily many Gauss points over the shell thickness enables a realistic and efficient modeling of the non‐linear material behavior. Only one enhanced degree‐of‐freedom is needed to avoid volumetric and Poisson thickness locking. One key point of the formulation is the Taylor expansion of the inverse Jacobian matrix with respect to the element center leading to a very accurate modeling of arbitrary element shapes. The transverse shear and curvature thickness locking are cured by means of the assumed natural strain concept. Further crucial points are the Taylor expansion of the compatible cartesian strain with respect to the center of the element as well as the Taylor expansion of the second Piola–Kirchhoff stress tensor with respect to the normal through the center of the element. Copyright © 2010 John Wiley & Sons, Ltd.     

Erythropoietin Modulates Autophagy Signaling in the Developing Rat Brain in an In Vivo Model of Oxygen-Toxicity

Autophagy is a self-degradative process that involves turnover and recycling of cytoplasmic components in healthy and diseased tissue. Autophagy has been shown to be protective at the early stages of programmed cell death but it can also promote apoptosis under certain conditions. Earlier we demonstrated that oxygen contributes to the pathogenesis of neonatal brain damage, which can be ameliorated by intervention with recombinant human erythropoietin (rhEpo). Extrinsic- and intrinsic apoptotic pathways are involved in oxygen induced neurotoxicity but the role of autophagy in this model is unclear. We analyzed the expression of autophagy activity markers in the immature rodent brain after exposure to elevated oxygen concentrations. We observed a hyperoxia-exposure dependent regulation of autophagy-related gene (Atg) proteins Atg3, 5, 12, Beclin-1, microtubule-associated protein 1 light chain 3 (LC3), LC3A-II, and LC3B-II which are all key autophagy activity proteins. Interestingly, a single injection with rhEpo at the onset of hyperoxia counteracted these oxygen-mediated effects. Our results indicate that rhEpo generates its protective effect by modifying the key autophagy activity proteins.     

The effect of the reagent suite on froth stability in laboratory scale batch flotation tests

In batch flotation tests conducted on ores from the Merensky reef, changes in froth stability invariably occur with variations in the reagent suite. The main reagents are collectors (primary and secondary), activators, depressants and frothers. Since the particles entering and leaving the froth in a batch flotation system are continuously changing, the stability of the froth can vary. Under these conditions the simplest measure of froth stability is the measure of water recovery at a fixed froth height. The batch flotation system developed at UCT allows for the separation of gangue which is entrained relative to gangue which is floated. It has been found that the presence of naturally floatable gangue (NFG) leads to froth stabilisation, whereas the presence of hydrophobic sulfide minerals may lead to destabilisation of the froth depending on the hydrophobicity (contact angle) of the sulfide minerals. This can vary with ore type since particle shape and amount of particles present can influence the extent of destabilisation. At low depressant dosages sodium isobutyl xanthate (SIBX) always results in lower froth stability than sodium ethyl xanthate (SEX). The frothing nature of dithiophosphate leads to increased froth stability and the addition of copper sulfate results in destabilised froths. Increasing depressant dosage reduces the stabilising influence of NFG and the depressant type (guar gum or CMC) also affects froth stability. Frother can be used in an attempt to overcome the destabilising effects of high depressant dosage. This work examines the effect of variations in the reagent suite and uses water recovered at a fixed froth height as an indication of froth stability in order to analyse these effects on the recovery of sulfide minerals, floatable gangue and entrained gangue.     

Microstructure and creep behaviour of eutectic SnAg and SnAgCu solders

The paper presents creep data, that was gained on specimens of different microstructures. The three specimen types have been flip chip solder joints, pin trough hole solder joints and standard bulk solder specimens. The bulk solder specimen was a dog-bone type specimen (diameter=3 mm, LENGTH=117 mm). The pin trough hole solder joint consisted on a copper wire that was soldered into a hole of a double sided printed circuit board (thickness 1.5 mm). The flip chip solder joint specimen consisted of two silicon chips (4 mm × 4 mm), which were connected by four flip chip joints (one on each corner). SnAg and SnAgCu flip chip bumps (footprint 200 μm × 200 μm, joint height 165–200 μm, centre diameter 90…130 μm) were created by printing solder paste.Constant–load creep tests were carried out on all three specimen types at temperatures between 5 and 70 °C. Creep data was taken for strain rates between 10⁻¹⁰ and 10⁻³ s⁻¹. The specimens were tested in “as cast” condition and after thermal storage.The microstructural properties of the bulk specimens and real solder joints were examined using metallographic sectioning, optical microscopy techniques, and SEM-microprobe analysis. The results of the microstructural analysis were related to the investigated mechanical properties of the solders. Models of SnAg3.5 and SnAg4Cu0.5, that can be used with the ANSYS FEM software package, will be presented.     

Different susceptibilities of genetic variants of hepatitis C virus (HCV) to interferon (IFN)

Genetic variants of HCV may have different degrees of resistance to IFN and may therefore influence the outcome of IFN therapy. However, selection of HCV variants by IFN has not been investigated in detail. In this paper, heteroduplex analysis was used to monitor major changes of HCV populations in 4 chronically infected patients under IFN therapy. We found that a major variant of the HCV 5' non-coding region (5' NCR) emerged in a responder. In other patients although no new variant of the 5' NCR was identified, significant changes occurred within the core and E1 region of the HCV genome. Disappearance and emergence of HCV variants may reflect their different susceptibilities to IFN. Our results indicate that responses of HCV populations to IFN are complex and need to be characterized by analysis of multiple HCV genome regions.     

Pneumocandin Biosynthesis: Involvement of a trans‐Selective Proline Hydroxylase

Echinocandins are cyclic nonribosomal hexapeptides based mostly on nonproteinogenic amino acids and displaying strong antifungal activity. Despite previous studies on their biosynthesis by fungi, the origin of three amino acids, trans‐4‐ and trans‐3‐hydroxyproline, as well as trans‐3‐hydroxy‐4‐methylproline, is still unknown. Here we describe the identification, overexpression, and characterization of GloF, the first eukaryotic α‐ketoglutarate/Fe^II‐dependent proline hydroxylase from the pneumocandin biosynthesis cluster of the fungus Glarea lozoyensis ATCC 74030. In in vitro transformations with L ‐proline, GloF generates trans‐4‐ and trans‐3‐hydroxyproline simultaneously in a ratio of 8:1; the latter reaction was previously unknown for proline hydroxylase catalysis. trans‐4‐Methyl‐L ‐proline is converted into the corresponding trans‐3‐hydroxyproline. All three hydroxyprolines required for the biosynthesis of the echinocandins pneumocandins A₀ and B₀ in G. lozoyensis are thus provided by GloF. Sequence analyses revealed that GloF is not related to bacterial proline hydroxylases, and none of the putative proteins with high sequence similarity in the databases has been characterized so far.     

Durability and surface chemistry of horizontally aligned CNT films as electrodes upon electrolysis of acidic aqueous solution

We devised a simple and effective method of electrochemical functionalization of horizontally aligned CNT films in diluted HCl and H₂SO₄ solutions upon their electrolysis under a constant current mode. We were able to cause notable generation of carbon–oxygen and carbon–chlorine functional groups on the CNT film anodes as proven by EDX, XPS, and Raman spectroscopy. As a consequence, we observed significant changes of the morphology of the material under electron microscopy, what translated into improved compatibility of CNTs with hydrophilic media. In turn, application of CNT films as cathodes was found as a powerful tool for a thorough cleaning of the nanotubes. Finally, we demonstrated that by the selection of appropriate conditions, CNT films can act as easy-to-make and flexible electrodes with a high stability and performance superior to graphite for generation of non-oxidizing gases such as hydrogen from solution. CNT film electrodes are two orders of magnitude lighter and require much lower overpotential for faradaic splitting of water.