Mechanical properties of anatase and semi-metallic TiO2 nanotubes

We report for the first time on mechanical properties of anodically formed, self-organized TiO₂ nanotube layers on titanium. We compare their behavior in their virgin state and after conversion to their semi-metallic form by an acetylene treatment. We show that the acetylene treatment leads to significant enhanced hardness, tensile strength and friction behavior.     

Response of a proton exchange membrane fuel cell to a sinusoidal current load

The load-following capability of a proton exchange membrane fuel cell was studied by measuring the cell voltage response to a sinusoidal current load with large amplitude and varying frequency. A mathematical model was developed, incorporating mass transport and capacitive effects as well as the membrane resistance. The model was capable of separating the faradaic and capacitive currents and predicting the observed hysteresis. At frequencies of the sinusoidal current load below 1 Hz, no appreciable hysteresis in the polarisation curve was observed. When increasing the frequency above 1 Hz, a hysteresis appeared at current densities below 0.2 A cm^?2. The model related this hysteresis to capacitive effects. When using air as the cathode feed, hysteresis in the current density range 0.5 A cm^?2 and higher appeared above 1 Hz compared to 100 Hz for pure oxygen. The model revealed that hysteresis observed in this current density range was caused by oxygen transport limitations.     

Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

This paper is dealing with the influence of processing parameters for manufacturing of steel–carbon-fiber-reinforced-plastic (CFRP) hybrid plates by using the one-shot-hybrid resin-transfer-moulding (OSH-RTM) process. A design of experiments study was carried out. The quality of the manufactured parts was quantified by the bending modulus, the apparent interlaminar shear strength (ILSS), the maximum deflection and the density of the CFRP. The following changeable processing parameters were chosen: mould temperature, resin temperature, change in mass flow and maximum injection pressure. It is shown that the mould temperature and the change in mass flow show significant impact on the flexural modulus, density and maximum deflection of the plate while there is no significant impact on the apparent ILSS. Furthermore, the interaction between the mould temperature and resin temperature is having an influence on the flexural modulus and density.     

Oxidative dehydrogenation of propane in a perovskite membrane reactor with multi‐step oxygen insertion

A membrane reactor incorporating a hollow fiber with successive parts of oxygen permeable and passivated surface segments has been developed and was used for the oxidative dehydrogenation (DH) of propane. This membrane geometry allows a controlled oxygen feeding into the reactor over its axial length. In the oxidative DH, the thermodynamic limitation of propane DH can be overcome. By using this novel hollow fiber membrane reactor with a Pt/Sn/K DH catalyst, oxygen separation and propene formation could be established even at temperatures as low as 625°C with long‐term stability. Combining the hollow fiber membrane and the DH catalyst, the highest propene selectivity of 75% was observed at a propane conversion of 26% and 625°C whereas the best propene yield of 36% was obtained at 675°C (48% propene selectivity). The performance of this reactor is evaluated by applying various reaction conditions. © 2010 American Institute of Chemical Engineers AIChE J, 2010     

Monodisperse fine aerosol generation using fluidized bed

Monodisperse, fine aerosols are needed in many applications: filter testing, experiments for testing models, and aerosol instrument calibration, among others. Usually, monodisperse fine aerosols are generated in very low concentrations, or mass flow rates, in the laboratory scale. In this work, we needed to generate aerosols with higher mass flow rate than typically available by the laboratory-scale methods, such as atomizers, nebulizers, ultrasonic generators, vibrating orifice generators, and condensation generators. Therefore, we constructed a fluidized bed aerosol generator to achieve particle mass flow rates in the range of 15-100 g/h. Monodisperse, spherical SiO₂ particles of two sizes with geometrical diameters of 1.0 and 2.6 µm were used in the aerosol generator. The aerosol generator was used at both atmospheric pressure, and at high pressures up to 5 bar (abs).The particle size, mass concentration and the net average particle charge were measured after mixing the aerosol with nitrogen. The particle size distributions with both particle sizes were monodisperse, and no particle agglomerates were entrained from the fluidized bed. The behavior of the fluidized bed generator was found to be markedly different with the two particle sizes in regard to particle concentration, presumably due to different particle charging inside the generator. After determining the net average charge of the particles, an ion source Kr-85 was used to reduce the charge of the particles. This was found to be effective in neutralizing the particles.     

Luminescent Amphiphilic Aminoglycoside Probes to Study Transfection

We report the characterization of amphiphilic aminoglycoside conjugates containing luminophores with aggregation-induced emission properties as transfection reagents. These inherently luminescent transfection vectors are capable of binding plasmid DNA through electrostatic interactions; this binding results in an emission “on” signal due to restriction of intramolecular motion of the luminophore core. The luminescent cationic amphiphiles effectively transferred plasmid DNA into mammalian cells (HeLa, HEK 293T), as proven by expression of a red fluorescent protein marker. The morphologies of the aggregates were investigated by microscopy as well as ζ-potential and dynamic light-scattering measurements. The transfection efficiencies using luminescent cationic amphiphiles were similar to that of the gold-standard transfection reagent Lipofectamine® 2000.     

Refining Genotypes and Phenotypes in KCNA2-Related Neurological Disorders

Pathogenic variants in KCNA2, encoding for the voltage-gated potassium channel K_v1.2, have been identified as the cause for an evolving spectrum of neurological disorders. Affected individuals show early-onset developmental and epileptic encephalopathy, intellectual disability, and movement disorders resulting from cerebellar dysfunction. In addition, individuals with a milder course of epilepsy, complicated hereditary spastic paraplegia, and episodic ataxia have been reported. By analyzing phenotypic, functional, and genetic data from published reports and novel cases, we refine and further delineate phenotypic as well as functional subgroups of KCNA2-associated disorders. Carriers of variants, leading to complex and mixed channel dysfunction that are associated with a gain- and loss-of-potassium conductance, more often show early developmental abnormalities and an earlier onset of epilepsy compared to individuals with variants resulting in loss- or gain-of-function. We describe seven additional individuals harboring three known and the novel KCNA2 variants p.(Pro407Ala) and p.(Tyr417Cys). The location of variants reported here highlights the importance of the proline(405)–valine(406)–proline(407) (PVP) motif in transmembrane domain S6 as a mutational hotspot. A novel case of self-limited infantile seizures suggests a continuous clinical spectrum of KCNA2-related disorders. Our study provides further insights into the clinical spectrum, genotype–phenotype correlation, variability, and predicted functional impact of KCNA2 variants.     

Vitamin D Reverses Disruption of Gut Epithelial Barrier Function Caused by Campylobacter jejuni

Infections by the zoonotic foodborne bacterium Campylobacter jejuni (C. jejuni) are among the most frequent causes of bacterial gastroenteritis worldwide. The aim was to evaluate the relationship between epithelial barrier disruption, mucosal immune activation, and vitamin D (VD) treatment during C. jejuni infection, using intestinal epithelial cells and mouse models focused on the interaction of C. jejuni with the VD signaling pathway and VD treatment to improve C. jejuni-induced barrier dysfunction. Our RNA-Seq data from campylobacteriosis patients demonstrate inhibition of VD receptor (VDR) downstream targets, consistent with suppression of immune function. Barrier-preserving effects of VD addition were identified in C. jejuni-infected epithelial cells and IL-10^−/− mice. Furthermore, interference of C. jejuni with the VDR pathway was shown via VDR/retinoid X receptor (RXR) interaction. Paracellular leakiness of infected epithelia correlated with tight junction (TJ) protein redistribution off the TJ domain and apoptosis induction. Supplementation with VD reversed barrier impairment and prevented inhibition of the VDR pathway, as shown by restoration of transepithelial electrical resistance and fluorescein (332 Da) permeability. We conclude that VD treatment restores gut epithelial barrier functionality and decreases bacterial transmigration and might, therefore, be a promising compound for C. jejuni treatment in humans and animals.