Pin&Play: the surface as network medium

Integrating appliances in the home through a wired network often proves to be impractical: routing cables is usually difficult, changing the network structure afterward even more so, and portable devices can only be connected at fixed connection points. Wireless networks are not the answer either: batteries have to be regularly replaced or changed, and what they add to the device's size and weight might be disproportionate for smaller appliances. In Pin&Play, we explore a design space in between typical wired and wireless networks, investigating the use of surfaces to network objects that are attached to it. This article gives an overview of the network model, and describes functioning prototypes that were built as a proof of concept.     

Reliability of structures in high dimensions, part I: algorithms and applications

The present paper is concerned with the estimation of structural reliability when a large number of random variables is present. A sampling technique which uses lines in order to probe the failure domain, is presented. The latter is employed in conjunction with a stepwise procedure which makes use of Markov Chains. The resulting algorithm exhibits accelerated convergence.     

Corrosion Control by water‐soluble extracts from leaves of economic plants

Water extracts from leaves of date palm, phoenix dactylifera, henna, Lawsonia inermis, and corn, Zea mays, were tested as corrosion inhibitors for steel, aluminum, copper and brass in acid chloride and sodium hydroxide solutions using weight loss, solution analysis and potential measurements. The inhibition action was found to critically depend on metal type and solution composition. Only, date palm and henna extracts were found highly effective in reducing corrosion rate of steel in acid chloride solutions and aluminum in sodium hydroxide solutions. The inhibition efficiency increased with increasing the concentration of the extract. The inhibition was interpreted in terms of chemisorption of some active ingredients in the leaves according to Temkin isotherm.     

Self-Consistent Effects on the Starting Current of Gyrotron Oscillators

Self-consistent effects on the starting current of gyrotron oscillators are examined. Field profiles in the open cavity are shown to be sensitive to the interaction dynamics. This can either significantly raise or lower the oscillation threshold, particularly for the low-Q modes. The transition from resonant-mode oscillations at the low magnetic field to backward-wave oscillations at the high magnetic field is demonstrated.     

Equilibrium Moisture Characteristics of High Oleic Sunflower Seeds and Kernels

The equilibrium moisture content (EMC) characteristics of high oleic sunflower seeds and kernels between 10 and 55°C were determined by equilibrating the samples to known relative humidities (RH) above saturated salt solutions. EMC of the kernels was lower than that of seeds in the range of 11 to 96% ERH and at 25 and 40°C. Hysteresis effect was found for the EMC properties of seeds and kernels at 25°C. Four EMC-ERH models (modified Henderson, Chung-Pfost, Halsey, and Guggenheim-Anderson-de Boer) and their estimated parameters were evaluated for goodness of fit. GAB and Halsey equations showed the best fitting of experimental data although GAB equation adjusted for temperature described the EMC data the best. Components of the seed as oil content or hull/kernel ratio did not explain the slight differences in EMC found between the varieties.     

Drying of Uncoated Paper with Gas-Fired Infrared Emitters—Optimum Emitters' Location Within a Paper Machine Drying Section

This article theoretically investigates the drying of uncoated paper with gas-fired infrared (IR) emitters installed within the drying section of a given commercial paper machine. Specifically, it presents the ideal location of two opposing IR emitters within the drying section. The ideal location of the two opposing IR emitters corresponds to the highest machine speed with specified average moisture content of paper sheet at the end of the drying section. This article also presents the average evaporation rate, temperature, and moisture content of the paper sheet as it travels through the drying section with the two opposing IR emitters operating at the optimum location. In addition, the temperature and moisture profiles in the sheet thickness direction, before and after the IR emitters, are provided. This article is not concerned with the potential effects of drying with IR emitters on paper sheet properties and machine runnability issues.     

Hydrogen limitation--a method for controlling the performance of membrane biofilm reactor for autotrophic denitrification of wastewater.

Hydrogen-driven denitrification using the fiber membrane biofilm reactor (MBfR) was evaluated for consistent operation in tertiary wastewater treatment. The possibility of controlling the process rates, as well as biofilm parameters by supplying limited amounts of electron donor (hydrogen), was tested. Limiting the hydrogen supply proved to be efficient in controlling the biofilm growth and performance of the MBfR. Denitrification rates remained unchanged for both synthetic wastewater (SWW) and real municipal wastewater (MWW) effluent as well through the fluctuations in the substrate (NO3-N) concentration. The average denitrification rates were 0.50 (+/- 0.02) g NO3-N per day per m2 for SWW and 0.59 (+/- 0.04) g NO3-N per day per m2 for MWW. Biofilm density rather than thickness was the determining factor in substrate diffusion and biofilm sloughing, ultimately determining operating stability. Limited hydrogen supply assured constant volatile solids (VS) concentration in the biofilm. It was determined that VS/TS ratio higher than 0.25 assured stable biofilm operation. Decrease of VS/TS ratio below 0.25 led to shearing of the nonbiological outer layers of the biofilm. The values of chemical oxygen demand (COD), volatile suspended solids (VSS) and total suspended solids (TSS) in the final effluent were stable and well below wastewater effluent guidelines. Substitutions of bicarbonate with gaseous carbon dioxide as the carbon source did not affect denitrification rates despite lower than optimum pH conditions.     

Microstructure and properties of MoSi2–MoB and MoSi2–Mo5Si3 molybdenum silicides

MoSi₂-based intermetallics containing different volume fractions of MoB or Mo₅Si₃ were fabricated by hot-pressing MoSi₂, MoB, and Mo₅Si₃ powders in vacuum. Both classes of alloys contained approximately 5 vol.% of dispersed silica phase. Additions of MoB or Mo₅Si₃ caused the average grain size to decrease. The decrease in the grain size was typically accompanied by an increase in flexure strength, a decrease in the room temperature fracture toughness, and a decrease in the hot strength (compressive creep strength) measured around 1200 °C, except when the Mo₅Si₃ effectively became the major phase. Oxidation measurements on the two classes of alloys were carried out in air. Both classes of alloys were protected from oxidation by an in-situ adherent scale that formed on exposure to high temperature. The scale, although not analyzed in detail, is commonly recognized in MoSi₂ containing materials as consisting mostly of SiO₂. The MoB containing materials showed an increase in the scale thickness and the cyclic oxidation rate at 1400 °C when compared with pure MoSi₂. However, in contrast with the pure MoSi₂ material, oxidation at 1400 °C began with a weight loss followed by a weight gain and the formation of the protective silica layer. The Mo₅Si₃ containing materials experienced substantial initial weight losses followed by regions of small weight changes. Overall, the MoB and Mo₅Si₃ additions to MoSi₂ tended to be detrimental for the mechanical and oxidative properties.     

Iterative method for the design of DFT filter Bank

Multirate adaptive filters have numerous advantages such as low computational load, fast convergence, and parallelism in the adaptation. Drawbacks when using multirate processing are mainly related to aliasing and reconstruction effects. These effects can be minimized by introducing appropriate problem formulation and employing sophisticated optimization techniques. In this paper, we propose a formulation for the design of a filter bank which controls the distortion level for each frequency component directly and minimizes the inband aliasing and the residual aliasing between different subbands. The advantage of this problem formulation is that the distortion level can be weighted for each frequency depending on the particular practical application. A new iterative algorithm is proposed to optimize simultaneously over both the analysis and the synthesis filter banks. This algorithm is shown to have a unique solution for each iteration. For a fixed distortion level, the proposed algorithm yields a significant reduction in both the inband aliasing and the residual aliasing levels compared to existing methods applied to the numerical examples.