优化现代太阳能装置

文章介绍了太阳能逆变器以及逆变器输出电流的直流偏移电流测量。     

Mechanical,barrier, and interfacial properties of biodegradable composite films made of methylcellulose and poly(caprolactone)

Methylcellulose (MC) films were prepared by casting from its 1% aqueous solution containing 0.5% vegetable oil, 0.25% glycerol, and 0.025% Tween^®80. Poly(caprolactone) (PCL) films were prepared by compression molding from its granules. Biodegradable composite films were fabricated using MC film as reinforcing agent and PCL as the matrix material by compression molding. One layer of MC film was reinforced with two layers of PCL films. The MC content in the composites was varied from 10 to 50% by weight. Mechanical, barrier, and degradation properties of PCL, MC, and composite films were evaluated. The values of puncture strength (PS), puncture deformation (PD), viscoelasticity (Y) coefficient, and water vapor permeability (WVP) of the composites (50% MC content) were found to be 124.3 N/mm, 3.2 mm, 31%, and 2.6 g·mm/m²·day·kPa, respectively. Oxygen transmission rate (OTR) of PCL, MC, and composites (50% MC) were found to be 175, 25, 22 cc/m²/d, respectively, which indicated that composite films showed significantly lower OTR than PCL films. Degradation tests of the composite films (50% MC) were performed for 6 weeks in aqueous medium (at 25°C), and it was found that composites lost its mass slowly with time. After 6 weeks, mass and PS of the composites were decreased to 13.4 and 12%, respectively. Composite interface was studied by scanning electron microscopy (SEM). The MC film had good adhesion with PCL matrix during compression molding and suggested strong interface of the composite system. SEM image after 6 weeks of degradation showed some openings in the interface and revealed slow degradation of the MC films. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Application of Selected Natural Antimicrobial Formulations for the Control of Food Pathogens in Fresh-Cut Cauliflower

In recent years, research on biopolymer based-coating containing natural antimicrobial agents is developing significantly. The objective of this study was to evaluate the antimicrobial efficiency of six formulations containing pre-selected natural antimicrobial compounds against Listeria monocytogenes, Escherichia coli O 157：H7, Salmonella typhimurium, the total bacteria and total yeasts and molds in cauliflower. Each formulation was subjected to a sensory test in parallel to microbiological analysis and the efficiency during storage at 5 ℃ was evaluated for the two best formulations, based on their ability to eliminate the target microorganisms. Both formulations were able to reduce all pathogens and total flora below detectable levels after 24 h of storage at 5 ℃. Using washing or spraying treatments, the two formulations were able to reduce Listeria to undetectable levels for 3 d. This efficiency was extended to 7 d when the formulations were incorporated into an edible coating. Washing treatment with the two formulations was also able to limit the growth of yeast and molds at levels lower than 2 log, for more than 7 d. The population of E. coli was reduced to below the detection limit during 14 d of storage, after washing treatment with the two formulations. The spraying treatment of cauliflower with the formulations allowed the use of very small amounts of antimicrobials while maintaining a fairly good efficiency, greatly reducing the potential costs of implementing this method in the industry. Future research may focus on development of nanoemulsion of antimicrobial formulations based on the developed antimicrobial formulations in this study to improve the better coating efficiency.     

Sectoral trends in global energy use and greenhouse gas emissions

Integrated assessment models have been used to project both baseline and mitigation greenhouse gas emissions scenarios. Results of these scenarios are typically presented for a number of world regions and end-use sectors, such as industry, transport, and buildings. Analysts interested in particular technologies and policies, however, require more detailed information to understand specific mitigation options in relation to business-as-usual trends. This paper presents sectoral trend for two of the scenarios produced by the Intergovernmental Panel on Climate Change's Special Report on Emissions Scenarios. Global and regional historical trends in energy use and carbon dioxide emissions over the past 30 years are examined and contrasted with projections over the next 30 years. Macro-activity indicators are analyzed as well as trends in sectoral energy and carbon demand. This paper also describes a methodology to calculate primary energy and carbon dioxide emissions at the sector level, accounting for the full energy and emissions due to sectoral activities.     

Horizontal and vertical transmissions in the US oil supply chain

Oil prices, inventory levels, and utilization rates are influenced by changes that are transmitted horizontally and/or vertically through the energy supply chain. We define horizontal transmissions as changes that are generated by linkages among fuels at a similar stage of processing while vertical transmissions are changes that are generated by upstream/downstream linkages in the oil supply chain. Here, we investigate vertical and horizontal transmissions by estimating vector error correction models (VECMs) that represent relationships among the price of crude oil, US refinery utilization rates, US stocks of crude oil, US stocks of motor gasoline, the US price of motor gasoline, and the US price of a substitute fuel, natural gas. Causal relationships estimated from both weekly and quarterly observations indicate that the price of crude oil is an important gateway for disturbances to the oil supply chain. Impulse response functions indicate that disturbances to crude oil prices ripple down the oil supply chain and affect inventory behaviors, refinery utilization rates, and the price of motor gasoline, and are transmitted laterally to the natural gas market.     

Long Distance Enhancement of Nonlinear Optical Properties Using Low Concentration of Plasmonic Nanostructures in Dye Doped Monolithic Sol–Gel Materials

Monolithic sol–gel silica composites incorporating platinum‐based chromophores and various types of gold nanoparticles (AuNPs) are prepared and polished to high optical quality. Their photophysical properties are investigated. The glass materials show well‐defined localized surface plasmon resonance (SPR) absorbance from the visible to NIR. No redshifts of the AuNP plasmon absorption peaks due to the increase in nanoparticle doping concentration are observed in the glasses, proving that no or very small SPR coupling effects occur between the AuNPs. At 600 nm excitation, but not at 532 nm, the AuNPs improve the nonlinear absorption performance of glasses codoped with 50 × 10^?3 m of a Pt‐acetylide chromophore. The glasses doped with lower concentrations of AuNPs (2–5 μm average distance) and 50 × 10^?3 m in chromophore, show a marked improvement in nonlinear absorption, with no or only small improvement for the more highly AuNP doped glasses. This study shows the importance of excitation wavelength and nanoparticle concentration for composite systems employing AuNPs to improve two‐photon absorption of chromophores.     

Finite element evaluation of free-edge singular stress fields in anisotropic materials

A finite element formulation based on the work of Yamada and Okumura¹⁴ is presented to determine the order of singularity and angular variation of the stress and displacement fields surrounding a singular point on a free edge of anisotropic materials. Emphasis is placed on the computational aspects of this method when applied to configurations including fully bonded multi-material junctions intersecting a free edge as well as materials containing cracks intersecting a free edge. The study shows that the singularity of the three-dimensional stress field may be accurately determined with a relatively small number of elements only when a proper level of numerical integration is used. The method is applied to isotropic and orthotropic materials with a crack intersecting a free edge and an anisotropic three-material junction intersecting a free edge. The efficiency and accuracy of the method indicates it could be used to develop a numerical solution for the singular field that could in turn be used to create free-edge enriched finite elements.     

Site-Specific Isotopic Labeling (SSIL): Access to High-Resolution Structural and Dynamic Information in Low-Complexity Proteins

Remarkable technical progress in the area of structural biology has paved the way to study previously inaccessible targets. For example, large protein complexes can now be easily investigated by cryo-electron microscopy, and modern high-field NMR magnets have challenged the limits of high-resolution characterization of proteins in solution. However, the structural and dynamic characteristics of certain proteins with important functions still cannot be probed by conventional methods. These proteins in question contain low-complexity regions (LCRs), compositionally biased sequences where only a limited number of amino acids is repeated multiple times, which hamper their characterization. This Concept article describes a site-specific isotopic labeling (SSIL) strategy, which combines nonsense suppression and cell-free protein synthesis to overcome these limitations. An overview on how poly-glutamine tracts were made amenable to high-resolution structural studies is used to illustrate the usefulness of SSIL. Furthermore, we discuss the potential of this methodology to give further insights into the roles of LCRs in human pathologies and liquid–liquid phase separation, as well as the challenges that must be addressed in the future for the popularization of SSIL.     

Macrocell corrosion of steel in concrete: Characterization of anodic behavior in relation to the chloride content

This study presents the determination of electrochemical properties of active steel in mortar, based on inverse numerical modeling that focuses on their dependency on chloride content. An experimental campaign, consisting of galvanic coupling tests between anode samples contaminated with different chloride concentrations and cathode samples without chlorides, was carried out. Cathode polarization tests allowed for directly determining passive steel electrochemical parameters. Anode polarization tests coupled with a numerical optimization were then performed for quantifying active steel parameters and focusing on chloride's effect on the iron anodic Tafel coefficient. Furthermore, the steel electrochemical properties were successfully used as input parameters to model the galvanic experiments.