Tracing the route of China’s Internet censorship: An empirical study

Faced with the world’s largest Internet population, the Chinese government is torn between its massive drive for marketization and the need to curb cyber dissent. This paper investigates how the Chinese state censors the Internet by tracing the trajectory of mechanisms to block websites non grata. Results show that Chinese government’s Internet control methods are diverse with systematic collaborations from local authorities at various administrative levels. We also found evidence that the government has customized blocking strategies for what it considers to be important websites. The efficacy and implications of China’s Internet censorship system were also discussed.     

Accelerated development of CuSbS2 thin film photovoltaic device prototypes

Development of alternative thin film photovoltaic technologies is an important research topic because of the potential of low‐cost, high‐efficiency solar cells to produce terawatt levels of clean power. However, this development of unexplored yet promising absorbers can be hindered by complications that arise during solar cell fabrication. Here, a high‐throughput combinatorial method is applied to accelerate development of photovoltaic devices, in this case, using the novel CuSbS₂ absorber via a newly developed three‐stage self‐regulated growth process to control absorber purity and orientation. Photovoltaic performance of the absorber, using the typical substrate CuIn_xGa_{1 − x}Se₂ (CIGS) device architecture, is explored as a function of absorber quality and thickness using a variety of back contacts. This study yields CuSbS₂ device prototypes with ~1% conversion efficiency, suggesting that the optimal CuSbS₂ device fabrication parameters and contact selection criteria are quite different than for CIGS, despite the similarity of these two absorbers. The CuSbS₂ device efficiency is at present limited by low short‐circuit current because of bulk recombination related to defects, and a small open‐circuit voltage because of a theoretically predicted cliff‐type conduction band offset between CuSbS₂ and CdS. Overall, these results illustrate both the potential and limits of combinatorial methods to accelerate the development of thin film photovoltaic devices using novel absorbers. Copyright © 2016 John Wiley & Sons, Ltd.     

On the complexity of Internet traffic dynamics on its topology

Most studies of Internet traffic rely on observations from a single link. The corresponding traffic dynamics has been studied for more than a decade and is well understood. The study of how traffic on the Internet topology, on the other hand, is poorly understood and has been largely limited to the distribution of traffic among source-destination pairs inside the studied network, also called the traffic matrix. In this paper, we make a first step towards understanding the way traffic gets distributed onto the whole topology of the Internet. For this, we rely on the traffic seen by a transit network, for a period of more than a week. As we are still at the stage of understanding the topological traffic distribution, we do not try to model the traffic dynamics. Rather we concentrate on understanding the complexity of describing the traffic observed by a transit network, how it maps onto the AS-level topology of the Internet and how it changes over time. For this, we rely on well-known tools of multi-variate analysis and multi-resolution analysis. Our first observation is that the structure of the Internet topology highly impacts the traffic distribution. Second, our attempts at compressing the traffic on the topology through dimension reduction suggests two options for traffic modeling: (1) to ignore links on the topology for which we do not see much traffic, or (2) to ignore time scales smaller than a few hours. In either case, important properties of the traffic might be lost, so might not be an option to build realistic models of Internet traffic. Realistic models of Internet traffic on the topology are not out of reach though. In this paper, we identify two properties such models should have: (1) use a compact representation of the dependencies of the traffic on the topology, and (2) be able to capture the complex multi-scale nature of traffic dynamics on different types of links.     

Kinetics and thermal crystallinity of recycled PET. II. Topographic study on thermal crystallinity of the injection-molded recycled PET

The injected specimens of recycled poly(ethylene terephthalate) (R-PET) and its blends with engineering PET (E-PET) are studied with differential scanning calorimetry (DSC). Specimens are dissected into three segments of (1) outer skin, (2) middle, and (3) the core for the topographic study of their separate crystallinities, which are induced by different crystallization rates in the injection mode. DSC thermograms reveal the different crystallinity states among these three segments with decreasing crystallinity from core to middle to the skin segments and the times and contact of injection-molded specimens with the mold during the cooling cycle after the injection of the specimens. With the same procedures of injection molding, comparisons of crystallinity among various specimens of virgin blow molding grade PET (B-PET), E-PET, and R-PET are made. There are little differences in crystallinity among three segments of B- or E-PET specimens. In contrast, a higher degree of crystallinity in the core segment than either middle or skin segments is observed for the R-PET. This may contribute to the faster crystallization rate of the R-PET in the mold. Specimens of R-/E-PET blends follow the R-PET pattern, even in 20% of R-PET in the blend. This faster crystallization rate of R-PET is confirmed with the lowering crystallization temperatures (T_c) of the R-PET and R-/E-PET blended specimens in the DSC heating process. Dynamic DSC cooling analysis reveals a high order of crystallinity in R-PET and R-/E-PET blends. Gel permeation chromatography (GPC) measurements of molecular weights and distributions support the orderly structure for R-PET. Terminal group analysis and intrinsic viscosity measurements of the R-PET support the chain modification of R-PET during the thermal treatments in accordance with the evidences of smaller M_w and narrower molecular-weight distribution from the GPC findings for the recycled PET. © 1996 John Wiley & Sons, Inc.     

智能手机如何实现数据同步化

手机的使用模式相当简单:用户端口只要离PC数尺的距离,蓝牙手机就能自动进行电子邮件、相片、工作清单、联络人等数据的同步化.但有时用户对蓝牙的同步化与数据传输功能仍存在一些困惑,如PC虽然有蓝牙功能,但却经常无法连上手机如第一次就想让蓝牙功能顺利执行仍需要一些技巧,并不能立马使用等.本文详细为您讲述如何使智能手机实现数据同步化.     

Role of Tyrosine Kinase Syk in Thrombus Stabilisation at High Shear

Understanding the pathways involved in the formation and stability of the core and shell regions of a platelet-rich arterial thrombus may result in new ways to treat arterial thrombosis. The distinguishing feature between these two regions is the absence of fibrin in the shell which indicates that in vitro flow-based assays over thrombogenic surfaces, in the absence of coagulation, can be used to resemble this region. In this study, we have investigated the contribution of Syk tyrosine kinase in the stability of platelet aggregates (or thrombi) formed on collagen or atherosclerotic plaque homogenate at arterial shear (1000 s⁻¹). We show that post-perfusion of the Syk inhibitor PRT-060318 over preformed thrombi on both surfaces enhances thrombus breakdown and platelet detachment. The resulting loss of thrombus stability led to a reduction in thrombus contractile score which could be detected as early as 3 min after perfusion of the Syk inhibitor. A similar loss of thrombus stability was observed with ticagrelor and indomethacin, inhibitors of platelet adenosine diphosphate (ADP) receptor and thromboxane A₂ (TxA₂), respectively, and in the presence of the Src inhibitor, dasatinib. In contrast, the Btk inhibitor, ibrutinib, causes only a minor decrease in thrombus contractile score. Weak thrombus breakdown is also seen with the blocking GPVI nanobody, Nb21, which indicates, at best, a minor contribution of collagen to the stability of the platelet aggregate. These results show that Syk regulates thrombus stability in the absence of fibrin in human platelets under flow and provide evidence that this involves pathways additional to activation of GPVI by collagen.     

选择同轴电缆和双绞线

因其性能的限制,铜缆的应用几次走到了尽头。之后,新工艺和元件的推出又使它得到了重生。对于两种最常用的高性能铜缆,同轴电缆和双绞线理论上是有局限性的,然而,我们离这些极限有多近呢？