Application of substituted N-arylpyrroles in the corrosion protection of aluminium in hydrochloric acid

The inhibiting action of N-arylpyrroles on aluminium in 0.17 mol dm^–3 hydrochloric acid solution, in the temperature range 20–60 °C, was studied using potentiodynamic and electrochemical impedence spectroscopy techniques. The inhibiting efficiency of both investigated compounds 1-(2-fluorophenyl)-2,5-dimethylpyrrole (compound A) and 1-(2-fluorophenyl)-2,5-dimethylpyrrole-3-carbaldehyde (compound B) slightly increases with increasing temperature of the corrosive solution. Inhibitor adsorption on the elecrode surface decreases the apparent activation energy of the hydrogen evolution reaction. Compound A follows the Temkin adsorption isotherm, while its carbaldehyde derivative follows the Langmuir isotherm. The results of the apparent energy of activation and the standard free energy of adsorption point to stronger chemisorption of the compound A. However, due to additional condensation of molecules with carbaldehyde groups on the electrode surface, the carbaldehyde derivative exhibits even better inhibiting efficiency than compound A. The kinetic corrosion parameters, analysed in terms of the impedance data, show a satisfactory agreement with those obtained by the potentiodynamic method.     

IR-change and colour changes of long-oil air drying alkyd paints as a result of UV irradiation

In this study the formation of photo-oxidative species was studied by monitoring the changes in the FT-IR spectra and colour changes. To stabilize long-oil air drying alkyd paint, separate and synergistic influence of two stabilizers were used Uvasorb^®S28 as the UV-absorber and Uvasorb^®HA29 as the stabilizer which inhibits the degradation of some groups. In the presence of UV radiation (450 h, λ > 300 nm), the alkyd paint undergoes photodegradation with gradual change of its colour. The photochemical degradation of the alkyd paint is associated with an increase in the hydroxyl content and broadening of the absorption in the carbonyl region. Analysis of the colour changes in alkyd surface during photodegradation was carried out by measuring CIEL*a*b* colour components (L*, a*, b* and ΔE*). Overall, ΔE* colour change correlates well with photodegradation of alkyd paint by relative increase of the concentration of carbonyl and hydroxyl groups determinated by FT-IR measurements.     

The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium

Composite coatings based on lignin, obtained by electrophoretic deposition (EPD) on titanium, were investigated. The aim of this work was to produce hydroxyapatite/lignin (HAP/Lig) coatings on titanium and to investigate the effect of the lignin concentration on microstructure, morphology, phase composition, thermal behavior and cytotoxicity of the HAP/Lig coatings. An organosolv lignin was used for the production of the composite coatings studied in this research. The properties of HAP/Lig coatings were characterized using X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FT-IR) and X-ray photoelectron spectroscopy (XPS), as well as the MTT test of cytotoxicity. The results showed that higher lignin concentrations protected the HAP lattice during sintering, thereby improving the stability of the HAP/Lig coatings. The cell survival of peripheral blood mononuclear cells (PBMC) after proliferation indicates that the HAP/Lig coating with 1 wt% Lig electrodeposited on titanium was non-toxic with significant promise as a potential bone-repair material.     

Influence of calcium carbonate filler and mixing type process on structure and properties of styrene–acrylonitrile/ethylene–propylene–diene polymer blends

The properties of styrene–acrylonitrile (SAN) and ethylene–propylene–diene (EPDM) blends containing different types of calcium carbonate filler were studied. The influence of mixing type process on the blend properties was also studied. Two different mixing processes were used. The first one includes mixing of all components together. The other process is a two‐step mixing procedure: masterbatch (MB; EPDM/SAN/filler blend) was prepared and then it was mixed with previously prepared polymer blend. Surface energy of samples was determined to predict the strength of interactions between polymer blend components and used fillers. The phase morphology of blends and their thermal and mechanical properties were studied. From the results, it can be concluded that the type of mixing process has a strong influence on the morphological, thermal, and mechanical properties of blends. The two‐step mixing process causes better dispersion of fillers in blends as well as better dispersion of EPDM in SAN matrix, and therefore, the finest morphology and improved properties are observed in blends with MB. It can be concluded that the type of mixing process and carefully chosen compatibilizer are the important factors for obtaining the improved compatibility of SAN/EPDM blends. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Kinetics of Isothermal Ethanol Adsorption onto a Carbon Molecular Sieve under Conventional and Microwave Heating

The isothermal kinetics of ethanol adsorption from aqueous solution onto a zeolite type carbon molecular sieve (CMS‐3A) under conventional heating (CH) and microwave heating (MWH) was investigated. The adsorption kinetics is described by the model of a phase‐boundary controlled reaction for both heating modes. The activation energy (E_a) for the adsorption process under MWH is lower than under CH while the preexponential factor (lnA) is higher. Ethanol adsorption is a kinetically complex process whose complexity changes with the mode of heating. The established decrease in E_a and increase in lnA under MWH compared to CH is explained with the increase in the ground vibrational level of the – OH twisting vibrations in the ethanol molecule and with the decrease in its anharmonicity factor which is caused by the selective resonant transfer of energy from CMS‐3A to the OH oscillators.     

Nanocrystaline solid solution CeO2–Bi2O3

Nanocrystalline powders of solid solution CeO₂–Bi₂O₃ were synthesized by self-propagating room temperature reaction (SPRT) procedure with composition (Ce_1?xBi_xO_2?δ where the x = 0.1–0.5). X-ray diffraction analyses show that for x < 0.50 a solid solution with fluorite structure is formed. Rietveld's structure refinement method was applied to characterize prepared powders and its microstructure (size–strain). The lattice parameters increase according to Vegard's rule with increasing of Bi concentration. The average crystallite size is about 2–3 nm. Spectroscopic ellipsometry and Raman scattering measurements were used to characterize the samples at room temperature. The Raman measurements demonstrated electron molecular vibrational coupling and increase of oxygen vacancy concentration whereas increase of Bi content provokes a small decrease of optical absorption edge in comparison with pure ceria. Specific surface area of obtained powders was measured by Brunauer–Emmet–Teller (BET) method.     

Preliminary study of the anticancer applications of mesoporous materials functionalized with the natural product betulinic acid

Dehydrated MCM-41 (S1) was functionalized under nitrogen with 3-chloropropyltriethoxysilane (CPTS) and 3-aminopropyltriethoxysilane (APTS) by grafting in toluene at 80 °C over 48 h to give the corresponding materials S2 and S3, respectively. Subsequently, S2 and S3 were suspended in methanol and reacted in a nitrogen atmosphere with betulinic acid (BA) for 48 h at 65 °C (in the presence of the triethylamine of S2) to give the BA-functionalized materials S4 and S5. All materials studied were characterized by powder X-ray diffraction, X-ray fluorescence, nitrogen gas sorption, multinuclear MAS NMR spectroscopy, thermogravimetry, UV spectroscopy, IR, SEM, and TEM. To study the release of BA, S4 and S5 were suspended in solutions simulating various body pH conditions (pH 7.4, 5.5, and 3.0). Results of the quantification of BA release by HPLC for S4 show a pH-dependent and very slow BA release following a logarithmic tendency, while S5 behaves differently, also pH-dependent but, in this case, fast release of BA which requires only days for total release of the therapeutic compound. In addition, the cytotoxic activity of all synthesized materials against various cancer cell lines was studied. The results show the absence of an antiproliferative effect on the surfaces without BA S1-S3, while an antiproliferative effect was observed with S4 and S5 and was attributed to the release of BA in the medium.     

Lipid peroxidative damage on Cisplatin exposure and alterations in antioxidant defense system in rat kidneys: a possible protective effect of selenium

Cisplatin (Cis-diamminedichloroplatinum II, CP) is an important chemotherapeutic agent, useful in the treatment of several cancers, but with several side effects such as nephrotoxicity. The present study investigated the possible protective effect of selenium (Se) against CP-induced oxidative stress in the rat kidneys. Male Wistar albino rats were injected with a single dose of cisplatin (7 mg CP/kg b.m., i.p.) and selenium (6 mg Se/kg b.m, as Na(2)SeO(3), i.p.), alone or in combination. The obtained results showed that CP increased lipid peroxidation (LPO) and decreased reduced glutathione (GSH) concentrations, suggesting the CP-induced oxidative stress, while Se treatment reversed this change to control values. Acute intoxication of rats with CP was followed by statistically significant decreased activity of antioxidant defense enzymes: superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GSH-Px), glutathione reductase (GR) and glutathione-S-transferase (GST). Treatment with Se reversed CP-induced alterations of antioxidant defense enzyme activities and significantly prevented the CP-induced kidney damage.