Recovery of copper from a surface altered chalcopyrite contained ball mill spillage through bio-hydrometallurgical route

Bioleaching studies for chalcopyrite contained ball mill spillages are very scarce in the literature. We developed a process flow sheet for the recovery of copper metal from surface activated (600 °C, 15 min) ball mill spillage through bio-hydrometallurgical processing route. Bioleaching of the activated sample using a mixed meso-acidophilic bacterial consortium predominantly A. ferrooxidans strains was found to be effective at a lixiviant flow rate of 1.5 L/h, enabling a maximum 72.36% copper recovery in 20 days. Mineralogical as well as morphological changes over the sample surface were seen to trigger the bioleaching efficiency of meso-acidophiles, thereby contributing towards an enhanced copper recovery from the ball mill spillage. The bio-leach liquor containing 1.84 g/L Cu was purified through solvent extraction using LIX 84I in kerosene prior to the recovery of copper metal by electrowinning. Purity of the copper produced through this process was 99.99%.     

Improved mechanical and moisture resistance property of in situ polymerized transparent PMMA/Cellulose composites

This article evaluates the role of cellulosic fillers in a synthetic polymer matrix like polymethylmethacrylate (PMMA) when incorporated by in situ suspension polymerization technique. Cellulose micro/nanofibers (CNF) were extracted from jute fibers and chemically modified with maleic anhydride (MACNF) to increase their interfacial compatibility with PMMA by participation of the MA moiety in the free radical polymerization with MMA. The effect of incorporating MACNF on the physical and mechanical properties of the PMMA matrix was investigated. Optical transparency was retained in the in situ prepared PMMA/cellulose composites (IPMC) similar to that of unreinforced PMMA. Another set of PMMA/cellulose composites was prepared by dispersing MACNF in PMMA matrix by ex situ solution dispersion method (EPMC). The modification of CNF with MA significantly improved the filler/matrix interfacial compatibility and in situ polymerization technique further enhanced the properties of the composites. The high moisture absorption tendency, which is a major drawback of the cellulose filled composites, remarkably reduced in IPMC. POLYM. COMPOS., 36:1748–1758, 2015. © 2014 Society of Plastics Engineers     

Green composites based on high‐density polyethylene and Saccharum spontaneum: Effect of filler content on morphology,thermal, and mechanical properties

Here we report the preparation and characterization of a green composite based on high‐density polyethylene and Kaans grass (Saccharum spontaneum). The composites were prepared by conventional melt‐mixing method, using maximum loading of Kaans grass in powder form (KG‐filler) to achieve acceptable range of required properties. Maleic anhydride grafted polyethylene was used as compatibilizer to achieve effective interaction for improved surface adhesion which was confirmed by FT‐IR spectroscopy. Morphological studies revealed good interaction between the base polymer matrices and the KG‐fillers that improved the mechanical and thermal properties of the composites up to certain (10 phr) KG‐filler loading. Study on water absorption property revealed moderate increase in weight at higher KG‐filler loadings. Thermogravimetric analysis (TGA) and melt flow index (MFI) studies indicated retention of thermal stability and flow property of the HDPE/KG‐filler composite at lower filler loadings. POLYM. COMPOS., 36:2157–2166, 2015. © 2014 Society of Plastics Engineers     

Chitosan/calcium–alginate beads for oral delivery of insulin

A mild chitosan/calcium alginate microencapsulation process, as applied to encapsulation of biological macromolecules such as albumin and insulin, was investigated. The microcapsules were derived by adding dropwise a protein-containing sodium alginate mixture into a chitosan–CaCl₂ system. The beads containing a high concentration of entrapped bovine serum albumin (BSA) as more than 70% of the initial concentration were achieved via varying chitosan coat. It was observed that approximately 70% of the content is being released into Tris-HCl buffer, pH 7.4 within 24 h and no significant release of BSA was observed during treatment with 0.1M HCl pH 1.2 for 4 h. But the acid-treated beads had released almost all the entrapped protein into Tris-HCl pH 7.4 media within 24 h. Instead of BSA, the insulin preload was found to be very low in the chitosan/calcium alginate system; the release characteristics were similar to that of BSA. From scanning electron microscopic studies, it appears that the chitosan modifies the alginate microspheres and subsequently the protein loading. The results indicate the possibility of modifying the formulation in order to obtain the desired controlled release of bioactive peptides (insulin), for a convenient gastrointestinal tract delivery system. © 1996 John Wiley & Sons, Inc.     

Studies on the effect of thiuram disulfide on NR vulcanization accelerated by thiazole-based accelerator systems

Thiuram disulfides form synergistic combinations with thiazole and thiazole-based accelerators, namely, N-cyclohexy-2-benzothiazole sulfenamide (CBS), 2-mercaptobenzothiazole(MBT), and 2-mercaptobenzothiazyl disulfide (MBTS). Unfortunately, widely used thiuram disulfides (TD) generate carcinogenic N-nitrosoamine. It is reported that the nitrosamines from N-methylpiperazine and dibenzylamine are free from this menace. So, some investigations were carried out with the binary combinations of each of bis(N-methylpiperazino)thiuram disulfide (MPTD), tetrabenzylthiuram disulnde (TBzTD), and tetramethyl-thiuram disulfide (TMTD) separately with CBS, MBT, and MBTS. It was observed that all the TD are activated by the CBS, MBT, or MBTS in the combinations studied. The intensity of activation is manifested in the enhancement of torque, modulus, tensile strength, cure rate, hardness, and decrease of elongation at break values and is very much dependent upon the ratio of the accelerators used. Considering the torque, modulus, tensile strength, and the elongation at break values, it apears that MPTD and TBzTD are capable of competing with the hitherto unbeaten TMTD as suitable accelerators for the vulcanization of rubber. Some investigations in respect to heat- and age-resistance behavior have also been carried out and the observed differences in the activities of various binary combinations have been explained through a mechanism. The results obtained with filled vulcanizates indicate that the binary systems comprising TD and MBTS provide fruitful results of which the TBzTD–MBTS combination seems to give the best cure and physical data for practical vulcanizates. © 1996 John Wiley & Sons, Inc.     

The effect of bismaleimide resin on curing kinetics of epoxy–amine thermosets

An analysis of the cure kinetics of several formulations composed of diglycidyl ether of bisphenol-A (DGEBPA) and aromatic diamines, methylenedianiline (MDA) and diaminodiphenyl sulfone (DDS), in the absence and presence of 4,4′-bismaleimidodiphenylmethane (BM) was performed. The dynamic differential scanning calorimetry (DSC) thermograms were analyzed with the help of ASTM kinetic software to determine the kinetic parameters of the curing reactions, including the activation energy, preexponential factor, rate constant, and 60 min ½ life temperature. The effects of substitution of one curing agent for another, their concentration, and the absence and presence of BM resin and its concentration on curing behavior, ethalpy, and kinetic parameters are discussed. © 1996 John Wiley & Sons, Inc.     

Ternary MOF‑Based Redox Active Sites Enabled 3D‑on‑2D Nanoarchitectured Battery‑Type Electrodes for High‑Energy‑Density Supercapatteries

Designing rationally combined metal-organic frameworks(MOFs)with multifunctional nanogeometries is of significant research interest to enable the electrochemical properties in advanced energy storage devices.Herein,we explored a new class of binderfree dual-layered Ni-Co-Mn-based MOFs(NCM-based MOFs)with three-dimensional(3D)-on-2D nanoarchitectures through a polarityinduced solution-phase method for high-performance supercapatteries.The hierarchical NCM-based MOFs having grown on nickel foam exhibit a battery-type charge storage mechanism with superior areal capacity(1311.4μAh cm^−2 at 5 mA cm^−2),good rate capability(61.8%;811.67μAh cm^−2 at 50 mA cm^−2),and an excellent cycling durability.The superior charge storage properties are ascribed to the synergistic features,higher accessible active sites of dual-layered nanogeometries,and exalted redox chemistry of multi metallic guest species,respectively.The bilayered NCM-based MOFs are further employed as a battery-type electrode for the fabrication of supercapattery paradigm with biomass-derived nitrogen/oxygen doped porous carbon as a negative electrode,which demonstrates excellent capacity of 1.6 mAh cm^−2 along with high energy and power densities of 1.21 mWh cm^−2 and 32.49 mW cm^−2,respectively.Following,the MOF-based supercapattery was further assembled with a renewable solar power harvester to use as a self-charging station for various portable electronic applications.     

Effectiveness of Cross-Flow Microfiltration for Removal of Microorganisms Associated with Unpasteurized Liquid Egg White from Process Plant

ABSTRACT:  Thermal preservation is used by the egg industry to ensure the microbiological safety of liquid egg white (LEW); however, it does not eliminate all microorganisms and impairs some of the delicate functional properties of LEW. In this study, a pilot-scale cross-flow microfiltration (MF) process was designed to remove the natural microflora present in commercial LEW, obtained from a local egg-breaking plant, while maintaining the nutritional and functional properties of the LEW. LEW, containing approximately 10^{6 ± 1.7} colony forming units (CFU) per milliliter of total aerobic bacteria, was microfiltered using a ceramic membrane with a nominal pore size of 1.4 μm, at a cross-flow velocity of 6 m/s. To facilitate MF, LEW was screened, homogenized, and then diluted (1 : 2, w/w) with distilled water containing 0.5% sodium chloride. Homogenized LEW was found to have a threefold lower viscosity than unhomogenized LEW. Influence of MF temperature (25 and 40 °C) and pH (6 and 9) on permeate flux, transmission of egg white nutrients across the membrane, and microbial removal efficiency were evaluated. The pH had a significantly greater influence on permeate flux than temperature. Permeate flux increased by almost 148% when pH of LEW was adjusted from pH 9 to pH 6 at 40 °C. Influence of temperature on permeate flux, at a constant pH, however, was found to be inconclusive. Microbial removal efficiency was at least 5 log₁₀ CFU/mL. Total protein and SDS-PAGE analysis indicated that this MF process did not alter the protein composition of the permeate, compared to that of the feed LEW, and that the foaming properties of LEW were retained in the postfiltered samples.     

Biological and health implications of toxic heavy metal and essential trace element interactions

Human civilization and a concomitant increase in industrial activity has gradually redistributed many toxic metals from the earth's crust to the environment and increased the possibility of human exposure. Among the various toxic elements, heavy metals cadmium, lead, and mercury are specially prevalent in nature due to their high industrial use. These metals serve no biological function and their presence in tissues reflects contact of the organism with its environment. They are cumulative poison, and are toxic even at low dose. Studies of metabolism and toxicity of these elements have revealed important interactions between them and some essential dietary elements like calcium, zinc, iron, selenium, copper, chromium, and manganese. In general, a deficiency of these essential elements increases toxicity of heavy metals, whereas an excess appears to be protective. While most of the observations are on laboratory animals, limited human data are in agreement with the results of animal experiments. These suggest that the dietary presence of the essential elements may contribute to the protection of man and animal from the effects of heavy metal exposure, while their deficiency may increase toxicity. Appropriate dietary manipulation thus may be valuable in the prevention and treatment of heavy metal toxicity.     

Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.