Production of IL-6 by T cells from the femoral head of patients with rapidly destructive coxopathy (RDC)

We developed a method to improve the quantitative precision of FDG-PET scans in cancer patients. The total-lesion evaluation method generates a correlation coefficient (r) constrained Patlak parametric image of the lesion together with three calculated glucose metabolic indices: (a) the total-lesion metabolic index ("KT-tle", ml/min/lesion); (b) the total-lesion voxel index ("VT-tle", voxels/lesion); and (c) the global average metabolic index ("KV-tle", ml/min/voxel). METHODS: The glucose metabolic indices obtained from conventional region of interest (ROI) and multiplane evaluation were used as standards to evaluate the accuracy of the total-lesion evaluation method. Computer simulations and four patients with metastatic melanoma before and after chemotherapy were studied. RESULTS: Computer simulations showed that the total-lesion evaluation method has improved precision (% s.d. < 0.6%) and accuracy (approximately 10% error) compared with the conventional ROI method (% s.d. approximately 5%; approximately 25% error). The KT-tle and VT-tle indices from human FDG-PET studies using the total-lesion evaluation method showed excellent correlations with the corresponding values obtained from the conventional ROI methods and multiplane evaluation (r approximately 1.0) and CT lesion volume measurements. CONCLUSION: This method is a simple but reliable way to quantitatively monitor tumor FDG uptake. The method has several advantages over the conventional ROI method: (a) less sensitive to the ROI definition, (b) no need for image registration of serial scan data and (c) includes tumor volume changes in the global tumor metabolism.     

12—THEORETICAL CONSIDERATIONS IN OPEN-END SPINNING

Two problems are discussed in this paper. In the first, the effect of the deposition of fibres in open-end-spinning systems on the yarn irregularity produced is considered.

The drafting operations are divided into two types, that is, System I and System II. System I is the type in which fibres are accelerated when the leading ends arrive at a point or a specified area, and System II is the type in which the trailing ends are accelerated in the same way as those of System I. System II is more profitable if the fibres have non-uniform length, and the leading-fibre-end-density function contains most of the irregularity. The rotating-drum spinning method is also considered from the viewpoint of yarn irregularity, and the range of wavelengths that should be decreased by this method is calculated. The conclusion is that the total draft must be smaller than 2πR/[lbar], where R is the inner radius of the drum and [lbar] is the mean fibre length.

The second problem concerns the separation draft. Open-end drafting systems require very high drafts for separating the fibres. The problem is to determine what value of draft is needed. The conclusion reached is that perfect separation is impossible because of the random arrangement of fibres. The probability of separation is presented and calculated theoretically.     

Hydrogen concentration on mirror surfaces of neutron bottles

Concentrations and depth distributions of the surface hydrogen and the surface deuterium in vacuum evaporated nickel layers and beryllium plates have been investigated by the ERDA method. It is shown that if the evaporation vacuum pressure is kept better than 10⁻⁶ Torr, the hydrogen adsorption from the residual gas during the evaporation is negligible and the hydrogen from residual or atmospheric gases after the evaporation is the main source of the surface hydrogen. Commercial beryllium plates are found to have surface hydrogen of about 10¹⁶ atoms cm². Deuterium treated samples, either in D₂ gas or heavy water, do not show more than possibly a partial replacement of hydrogen. The influence of substrates is small if the thickness of the evaporated nickel layer is more than 2000 Å. The measurements are in good agreement with previously published results.     

3—THE FINITE-DEFORMATION THEORY OF PLAIN-WEAVE FABRICS PART I: THE BIAXIAL-DEFORMATION THEORY

Theories of the biaxial tensile properties, the uniaxial tensile properties, and the shear-deformation properties of plain-weave fabrics are presented in a general form, a simplified stereo-model of the structure of plain-weave fabrics being used throughout these theories.

In the first part of this series, the biaxial tensile-deformation theory is presented with the aid of the model, and the forces required to stretch the fabric along the warp and weft directions at the same time are theoretically calculated from the properties of yarns and from the structure of the fabrics. In this biaxial theory, both warp and weft yarns are assumed to be perfectly flexible, and the forces caused by yarn-bending are ignored. The compressibility of the yarn under the action of a lateral compressive force is also introduced into the theory, and it is shown that the compressive properties of yarns have a great influence on the tensile properties of the fabrics.     

38—A FINITE-DEFORMATION THEORY OF THE 2/2-TWILL WEAVE UNDER BIAXIAL EXTENSION

A mechanical model of the 2/2-twill weave is presented in order to investigate the tensile properties of this weave under biaxial extension. The theory predicts that the compressional deformations of the warp and the weft at their cross-over point produce a superior effect on the tensile properties of the weave, especially in the relatively small-extension state. Experimental investigation to examine the accuracy of this theory is also reported, and good agreement between the theory and the experimental result is demonstrated.     

Investigation of electron trapping behavior in n-channel organic thin-film transistors with ultrathin polymer passivation on SiO2 gate insulator

Electron trapping behavior at the interface between N,N′-ditridecyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C13) film and thermal SiO₂ was investigated by utilizing ultrathin poly(methyl methacrylate) (PMMA) gate passivation layers. From the capacitance–voltage analysis for the PTCDI-C13/PMMA/SiO₂ interface, it is found that the electron tunneling appeared with PMMA thinner than 0.8 nm, and that the thickness of the gate passivation layer should be at least 1 nm for preventing injection-type hysteresis in the capacitance–voltage curve. The effective electron mobility of organic thin-film transistors (OTFTs) based on PTCDI-C13 with SiO₂ gate insulator was increased by suppressing shallow-level interface traps on SiO₂ with the PMMA layer, which can be partially accounted for by the multiple trap and release model. In this work, the thickness and the density of the PMMA layers were precisely controlled with a simple spin-coating process. Even 1.3-nm thick PMMA layer caused the improvements of the electron mobility and the air stability of the n-channel conduction.     

Analysis of specific IgE antibodies to staphylococcal enterotoxins,total serum IgE and hemogramme in carriers of Staphylococcus aureus

In order to evaluate the relationship between nasal carriers of S. aureus and their history of allergic diseases, the total serum IgE titer, the hemogramme pattern, and the titers of specific IgE antibody to Staphylococcal enterotoxins A and B (SEA and SEB) and of specific IgG antibody to SEB were investigated in 98 trade school students. Fifteen (15.3%) of the 98 students were sensitized to SEA and/or SEB (40.0% to SEA and 93.3% to SEB). In this group, 11 subjects were S. aureus carriers (73.0%) and 12 had a history of allergic diseases (80.0%). Low levels of specific IgG antibody to SEB were identified from both S. aureus carriers and non-carriers. The S. aureus carriers had significantly higher levels of total IgE titer than the non-carriers and the individuals with a history of allergic diseases had significantly higher total IgE titer levels than those having no history of allergic diseases (p < 0.01). In the hemogramme patterns of S. aureus carriers, a significant positive correlation was observed between the total IgE antibodies and the eosinophil rate (p < 0.05), and a negative correlation (p < 0.001) was recognized between the neutrophil and the lymphocyte rates.     

Behavior of Buried Flexible Pipe under High Fills and Design Implications

The existing design guidelines for buried flexible pipes are limited to depth up to 10?m. The increasing use of difficult terrains for infrastructure, landfills, and residential and industrial developments has prompted installation of drainage pipelines under 20–30?m high fills. This paper presents the behavior of an instrumented flexible pipe buried under a 47.1?m deep fill. For filling above 20?m, the measured vertical stress above the pipe exhibited a concave distribution, corresponding to 90 and 110% of the average vertical pressure at the center and edges of the pipe, respectively. The measured results suggest that a triangular lateral pressure distribution can lead to overly conservative and uneconomical results for high fills while Spangler’s analysis is unconservative. Based on the measured results, a revised vertical and lateral earth pressure diagram was proposed for the design of flexible pipe under high fills >20?m. This paper proposes closed-form analyses for estimating the moments and displacements of the pipe subjected to high fill earth pressures. These closed-form solutions agree well with the measured pipe displacements and strains.     

The relationship between ductility and grain-boundary precipitates in an Al-6.0% Zn-2.6% Mg alloy

The relationship between ductility and material parameters such as grain-boundary (GB) precipitate size and dimple size in an Al-6.0% Zn-2.6% Mg alloy has been studied. Under the condition of a given GB precipitate size, the ductility increases with decreasing number of GB precipitates and dimples per unit area. The critical GB precipitate sizes acting as the nuclei for void formation are deduced.