Fatty Acyl-CoA Reductase and Wax Synthase from <Emphasis Type="Italic">Euglena gracilis</Emphasis> in the Biosynthesis of Medium-Chain Wax Esters

Euglena gracilis, a unicellular phytoflagellate, can accumulate a large amount of medium-chain wax esters under anaerobic growth conditions. Here we report the identification and characterization of two genes involved in the biosynthesis of wax esters in E. gracilis. The first gene encodes a fatty acyl-CoA reductase (EgFAR) involved in the conversion of fatty acyl-CoAs to fatty alcohols and the second gene codes for a wax synthase (EgWS) catalyzing esterification of fatty acyl-CoAs and fatty alcohols, yielding wax esters. When expressed in yeast (Saccharomyces cerevisiae), EgFAR converted myristic acid (14:0) and palmitic acid (16:0) to their corresponding alcohols (14:0Alc and 16:0Alc) with myristic acid as the preferred substrate. EgWS utilized a broad range of fatty acyl-CoAs and fatty alcohols as substrates with the preference towards myristic acid and palmitoleyl alcohol. The wax biosynthetic pathway was reconstituted by co-expressing EgFAR and EgWS in yeast. When myristic acid was fed to the yeast, myristyl myristate (14:0–14:0), myristyl palmitoleate (14:0–16:1), myristyl palmitate (14:0–16:0) and palmityl myristate (16:0–14:0) were produced. These results indicate EgFAR and EgWS are likely the two enzymes involved in the biosynthesis of medium-chain wax esters in E. gracilis.     

Nutrient concentration in soil water extracts and soybean nutrition in response to lime and gypsum applications to an acid Oxisol under no-till system

No-till system (NTS) occupies 20 million hectares with grain crops in Brazil. However, calcium deficiency and aluminum toxicity can limit crop yields in many soils, and liming, associated to gypsum application, is an option for improving soil management. The objective of this study was to evaluate the effects of lime and gypsum application on the composition of soil water extracts of a clayey Rhodic Hapludox, cultivated with soybean under NTS. The experiment had a randomized complete block design with split-plots. The plots consisted of lime treatments (either a single rate of 4.5 t ha⁻¹ or three annual rates of 1.5 t ha⁻¹) surface-applied or incorporated at 0.2 m depth. The subplots received surface applications of gypsum (3, 6 and 9 t ha⁻¹). Liming increased total calcium and magnesium concentrations and the magnesium free Form activity (aMg²⁺) in the water extracts. The effect of liming on Mg was observed at deeper layers of the soil profile. Gypsum increased total concentration and free forms activities at calcium (aCa²⁺) and sulfate, but decreased to magnesium in the 0.05–0.2 m soil layer. Part of Mg lost from these upper layers probably contributed to increased Mg in the subsoil (0.4–0.8 m). Free forms activities at the aluminum, calcium, magnesium and sulfate were lower than the total concentrations, mainly for aluminum. Ca and Mg concentrations in soybean leaf tissue were positively correlated to the aCa²⁺ and aMg²⁺ in the soil water extract. Soybean grain yield was negatively correlated to both Mn total concentration and activity (free form) in the soil water extract, but it was positively correlated to sulfate (total concentration and free form activity) in the subsoil layer and to the Ca total concentration in the upper layer (0–0.05 m). It is concluded that lime and gypsum ameliorate soybean grain yield under NTS.     

Optical and Electron Spin Resonance Studies of Destruction of Porous Structures Formed by Nitrogen–Rare Gas Nanoclusters in Bulk Superfluid Helium

We studied optical and electron spin resonance spectra during destruction of porous structures formed by nitrogen–rare gas (RG) nanoclusters in bulk superfluid helium containing high concentrations of stabilized nitrogen atoms. Samples were created by injecting products of a radio frequency discharge of nitrogen–rare gas–helium gas mixtures into bulk superfluid helium. These samples have a high energy density allowing the study of energy release in chemical processes inside of nanocluster aggregates. The rare gases used in the studies were neon, argon, and krypton. We also studied the effects of changing the relative concentrations between nitrogen and rare gas on thermoluminescence spectra during destruction of the samples. At the beginning of the destructions, \(\alpha \)-group of nitrogen atoms, Vegard–Kaplan bands of \(\hbox {N}_2\) molecules, and \(\beta \)-group of O atoms were observed. The final destruction of the samples were characterized by a series bright flashes. Spectra obtained during these flashes contain M- and \(\beta \)-bands of NO molecules, the intensities of which depend on the concentration of molecular nitrogen in the gas mixture as well as the type of rare gas present in the gas mixture.     

Oxidative Stability of Polyunsaturated Edible Oils Mixed With Microcrystalline Cellulose

The oxidative stability of mixtures of edible oils containing polyunsaturated fatty acids (PUFA) and microcrystalline cellulose (MCC) was investigated. The mixtures studied consisted of oils of either camelina (CAM), cod liver (CLO), or salmon (SO) mixed with either colloidal or powdered MCC. A 50:50 (w/w) ratio of oil:MCC resulted in an applicable mixture containing high levels of PUFA edible oil and dietary fiber. The oxidative stability of the formulated mixtures and the pure oils was investigated over a period of 28 days. The peroxide value (PV) was assessed as a parameter for primary oxidation products and dynamic headspace gas chromatography mass spectrometry (GC/MS) was used to analyze secondary volatile organic compounds (VOC). CAM and the respective mixtures were oxidatively stable at both 4 and 22 °C during the storage period. The marine oils and the respective mixtures were stable at 4 °C. At 22 °C, an increase in hydroperoxides was found, but no increase in VOC was detected during the time-frame investigated. At 42 °C, prominent increases in PV and VOC were found for all oils and mixtures. Hexanal, a common marker for the degradation of n-6 fatty acids, propanal and 2,4-heptadienal (E,E), common indicators for the degradation of n-3 fatty acids, were among the volatiles detected in the headspace of oils and mixtures. This study showed that a mixture containing a 50:50 ratio of oil:MCC can be obtained by a low-tech procedure that does not induce oxidation when stored at low temperatures during a period of 1 month.     

Structure and surface properties of a novel bulk-matte waterborne polyurethane coating composite

This paper reports on a novel self-matte or bulk-matte waterborne polyurethane coating composite with inherently extremely low gloss. The coating composite was comprised of a siloxane-containing waterborne polyurethane (SPU) resin and a crosslinked waterborne polyurethane (CPU) resin. The CPU resin was mainly responsible for fabricating the micro-rough surface of the film, which was achieved by a crosslinking reaction between the waterborne polyurethane and bisphenol A-type epoxy E-44 resin. The SPU resin was used to improve the comprehensive properties of the film, which was ascribed to the addition of silane coupling agent KH792. Compared with traditional matte coatings, this coating composite made it possible to avoid high loadings of matting agent and to arrive at highly flexible low-gloss finishes. Gloss levels of as low as a few tenths of a percent, even at high incidence angles, have been achieved with zero loading of extraneous dulling agent. The chemical structures of the SPU and CPU resins were characterized by FTIR-ATR and NMR spectra. The micro-rough topographies and surface rough degrees of the SPU, CPU and their 50%/50% composite films were measured by SEM and MSP, respectively. The particle sizes and particle morphologies of the SPU and CPU resins were imaged by TEM. Finally, the comprehensive properties of the SPU, CPU and their 50%/50% composite resins were evaluated, including the water contact angle, film transparency, tensile strength and storage stability.     

Surface topography and tribological properties of coatings prepared from microparticle size polyurethane dispersions studied by atomic force microscopy

The surface topography and mechanical properties of coatings prepared using large particle size polyurethane dispersions (PUD) are investigated using atomic force microscopy (AFM) imaging, AFM-based force measurements, and friction force microscopy. PUD coatings, which are prepared from dispersions containing particles of micron size, have surface roughness of 250–300 nm and waviness of 2.5–3 μm resulting from the particle size. The surface moduli of the PUD coatings are varied by tuning the ratio of hard-to-soft segmentation in the polyurethanes and are found to be between 40 and 100 MPa. The friction coefficient obtained in the study is found to be correlated with both the surface modulus of the coatings and the adhesion between the probe and the samples and is well in line with the perceived feel of an experienced human panel. The data are very well behaved and clearly show the utility of this technique in characterizing these types of surfaces.     

The dynamics of local quantum uncertainty and trace distance discord for two-qubit <Emphasis Type="Italic">X</Emphasis> states under decoherence: a comparative study

We employ the concepts of local quantum uncertainty and geometric quantum discord based on the trace norm to investigate the environmental effects on quantum correlations of two bipartite quantum systems. The first one concerns a two-qubit system coupled with two independent bosonic reservoirs. We show that the trace discord exhibits frozen phenomenon contrarily to local quantum uncertainty. The second scenario deals with a two-level system, initially prepared in a separable state, interacting with a quantized electromagnetic radiation. Our results show that there exists an exchange of quantum correlations between the two-level system and its surrounding which is responsible for the revival phenomenon of non-classical correlations.     

Pose-Invariant Facial Expression Recognition Using Variable-Intensity Templates

In this paper, we propose a method for pose-invariant facial expression recognition from monocular video sequences. The advantage of our method is that, unlike existing methods, our method uses a simple model, called the variable-intensity template, for describing different facial expressions. This makes it possible to prepare a model for each person with very little time and effort. Variable-intensity templates describe how the intensities of multiple points, defined in the vicinity of facial parts, vary with different facial expressions. By using this model in the framework of a particle filter, our method is capable of estimating facial poses and expressions simultaneously. Experiments demonstrate the effectiveness of our method. A recognition rate of over 90% is achieved for all facial orientations, horizontal, vertical, and in-plane, in the range of ±40 degrees, ±20 degrees, and ±40 degrees from the frontal view, respectively. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Determination of Neomycin in Aquatic Products Using an Immunoaffinity Column Coupled to High-Performance Liquid Chromatography

Neomycin is widely used in veterinary medicine, while the confirmatory analysis of neomycin residues in aquatic samples has not been well identified. Here, in this study, an immunoaffinity chromatography (IAC) for determination of neomycin residues in aquatic sample was developed and optimized. The average maximum reserved content of neomycin (MRC) was calculated as 1611 ng, and by the simple regeneration with phosphate buffer saline, the recovery value maintained above 75 % even at the 32nd reusage (at the loading amount of 1200 ng). With the combination of IAC and high-performance liquid chromatography (HPLC), a new strategy for the analysis of neomycin was proposed and validated with different aquatic products. With the spiking concentration from 400 to 1200 ng/Kg, the recovery value was observed in the range of 75.58–117.80 %, and the CV was lower than 11 %. All these results suggested that the IAC-HPLC is a new and promising technique for the routine monitoring of neomycin residue in aquatic products.