Eating patterns of Turkish adolescents: a cross-sectional survey

Background  

Adolescence is a crucial period for development of dietary behaviors that continue into adulthood and influence the risk of chronic diseases later in life. The aim of this study was to determine the eating patterns of adolescents' and their compliance with the Food Guide Pyramid.     

Amperometric Simultaneous Measurement of Copper and Cobalt Ions with Polythiophene Incorporating Pendant Terpyridine Groups

Terpyridine containing thiophene monomer was synthesized. Electrochemical behavior of the monomer was studied by cyclic voltammetry. This monomer was polymerized via electrochemical methods and the resultant polymer was characterized. The stepwise fabrication process of the polymeric film electrode and its electrochemical sensing performance towards simultaneously Co and Cu ions were evaluated. The sensing parameters of the polymer electrode were investigated in detail, and the determination conditions were optimized. Under the optimal conditions, sensor response peak is linear to the Co ion concentration in the range of 1.0-50.0 µM and the Cu ion concentration in the range of 1.0–20.0 µM. Detection limit of terpyridine-based polythiophene film electrode for Co and Cu is respectively 100 nM and 0.05 nM.     

Electrical Properties of MOS Capacitor with TiO2/SiO2 Dielectric Layer

Silicon - The TiO2/SiO2 film being the dielectric layer was grown on the n-Si wafer using radio frequency (RF) magnetron sputtering. Thus, the Au/TiO2/SiO2/n-Si metal-oxide-semiconductor (MOS)...     

Colour changes of heat‐treated woods of red‐bud maple,European hophornbeam and oak

Colour evolution and colour changes were analyzed from small specimens of three heat treated wood species using the CIE L*a*b* colour space. Upon heat exposure, the wood substance became darker of species; this was accompanied by a steady reduction in lightness. As treatment conditions (e.g., time and temperature) increase, various shades of yellow were favoured for the surface of red‐bud maple wood (Δb = 1.22–9.79). For European hophornbeam wood, increased times at elevated temperatures make a blue (?b) colour the better choice. The total colour difference (ΔE) of the surfaces of wood substrates appear to be well correlated with the treatment temperature and time. The FTIR spectra suggest that the level of modification was insufficient for removing the major cell wall constituents of the wood substrates. All heat‐treated samples showed much less stability against colour difference in outdoor conditions. For red‐bud maple, the greatest improvement was achieved for samples that were treated at 150°C for 2 h (ΔE = 3.12). However, heat‐treated oak wood hadmuch less stability of colour difference for treatment conditions of 150°C for 10 h. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010.     

Influences of annealing temperature on anti-reflective performance of amorphous Ta2O5 thin films

Influences of thermal annealing on structural, optical and morphological properties of the tantalum pentoxide (Ta₂O₅) thin films were investigated and anti-reflective performances were discussed in detail. The Ta₂O₅ thin films were deposited onto Corning Glass (CG), Si, GaAs and Ge substrates by radio-frequency (RF) magnetron sputtering technique using Ta₂O₅ ceramic target. The obtained secondary ion mass spectroscopy (SIMS) analysis results showed that uniform Ta and O distribution have formed throughout depth of the films deposited on substrates. The X-Ray diffraction (XRD) results indicated that the annealed Ta₂O₅ thin films at 100, 200, 300 and 500?°C have exhibited amorphous (a-Ta₂O₅) characteristic. The increased temperature has resulted in increasing the surface roughness from 0.67 to 1.60?nm. The optical transmittance of the annealed thin films has increased from 70.85 to 80.32% with increasing temperature. Spectroscopic ellipsometer (SE) measurement results demonstrated that the increased temperature has increased the refractive index of the Ta₂O₅ thin film from 2.11 to 2.18. The Ta₂O₅ thin film has reduced the average optical reflectivity of the Si, GaAs and Ge substrates by 78, 55 and 70%, respectively. In addition, thermal annealing process has decreased the optical reflectivity of the film. The obtained experimental results showed that single-layer Ta₂O₅ thin films can be used as anti-reflective layer in optical and optoelectronic applications. The best optical transmittance and anti-reflective performance were obtained at the annealing temperature of 500?°C.     

Investigation of photo-electrochemical response of iron oxide/mixed-phase titanium oxide heterojunction toward possible solar energy conversion

Photocatalysts are part of key strategies to enable green fuel. Photocatalysis and water splitting could be a promising solution to challenges associated with the intermittent nature of sunlight as a huge energy source on Earth. In this study, photo-electrochemical performance and behavior of mixed-phase titanium oxide and iron oxide heterojunction (Ti-TiO_x (High-voltage)-FeO_x electrode) are compared to the photo-electrochemical performance and behavior of titanium oxide nanotubes with the rutile phase and iron oxide heterojunction (TiO_x-nanotubes (H₂SO₄/KF)-FeO_x electrode). The results of photo-electrochemical experiments show that the application of stabilization potential and the presence/absence of dissolved oxygen could not be considered as significant factors affecting the photo-electrochemical properties of the Ti-TiO_x (High-voltage)-FeO_x and TiO_x-nanotubes (H₂SO₄/KF)-FeO_x electrodes. The Ti-TiO_x (High-voltage)-FeO_x electrode shows an anodic photo-electrochemical response in wavelengths shorter than 530 nm and cathodic photo-electrochemical response in wavelengths longer than 530 nm. However, the Ti-nanotubes (H₂SO₄/KF)-FeO_x electrode consistently exhibits the anodic photo-electrochemical response. Both of the prepared heterojunctions are further characterized through Scanning Electron Microscopy, Energy-dispersive X-ray Spectroscopy, Diffuse Reflectance UV–Vis Spectroscopy, X-ray Diffraction, and Attenuated Total Reflectance Spectroscopy methods. These experiments show that despite different morphologies observed in SEM imaging data, the deposited iron oxide layers on both mixed-phase titanium oxide and titanium oxide nanotubes share the same hematite phase structure. However, only iron oxide electro-deposited on the surface of the mixed-phase titanium oxide, which contains both anatase and rutile phases, with vacant sites of oxygen, exhibits un-expected anodic and cathodic photo-electrochemical responses. Furthermore, according to the results of the characterization and photo-electrochemical investigations, the different chemical environment of mixed-phase titanium oxide, and the possible formation of different types of heterojunction structures in mixed-phase titanium oxide and iron oxide, in contrast to the titanium oxide nanotubes and iron oxide, might be considered the possible discernible reasons for the observed different photo-electrochemical responses. This paper sheds new light on photo-electrochemistry of iron oxide/mixed-phase titanium oxide heterojunction for possible solar energy conversion.     

Bench Scale Studies for Pretreatment of Sanitary Landfill Leachate with Moringa Oleifera Seeds Extract

A laboratory study using a bench scale model of two unit operations involved processes of coagulation (using Moringa oleifera seeds as a natural coagulant) and flocculation-sedimentation have been adopted to treat the leachate from Air Hitam Sanitary Landfill at Puchong in Malaysia. The results of this study has shown, that M. oleifera has a potential for the removal of heavy metals from the leachate, and may be used as a pre-treatment stage for biological treatment to eliminate a portion of the toxic heavy metals, which limit the activity of micro-organisms in the leachate.