Synthesis,Characterization and Surface Properties of Amidosulfobetaine Surfactants Bearing Odd-Number Hydrophobic Tail

Three amidosulfobetaine surfactants were synthesized namely: 3-(N-pentadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2a); 3-(N-heptadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2b), and 3-(N-nonadecanamidopropyl-N,N-dimethyl ammonium) propanesulfonate (2c). These surfactants were prepared by direct amidation of commercially available fatty acids with 3-(dimethylamino)-1-propylamine and subsequent reaction with 1,3-propanesultone to obtain quaternary ammonium salts. The synthesized surfactants were characterized by IR, NMR and mass spectrometry. Thermogravimetric analysis (TGA) results showed that the synthesized surfactants have excellent thermal stability with no major thermal degradation below 300 °C. The critical micelle concentration (CMC) values of the surfactants 2a and 2b were found to be 2.2 × 10^?4 and 1.04 × 10^?4 mol/L, and the corresponding surface tension (γ_CMC) values were 33.14 and 34.89 mN m^?1, respectively. The surfactants exhibit excellent surface properties, which are comparable with conventional surfactants. The intrinsic viscosity of surfactant (2b) was studied at various temperatures and concentrations of multi-component brine solution. The plot of natural logarithm of relative viscosity versus surfactant concentration obtained from Higiro et al. model best fit the surfactant behavior. Due to good salt resistance, excellent surface properties and thermal stability, the synthesized surfactant has potential to be used in various oil field applications such as enhanced oil recovery, fracturing, acid diversion, and well stimulation.     

Thermal analysis of wirelessly powered thermo-pneumatic micropump based on planar LC circuit

This paper studies the thermal behavior of a wireless powered micropump operated using thermo-pneumatic actuation. Numerical analysis was performed to investigate the temporal conduction of the planar inductor-capacitor (LC) wireless heater and the heating chamber. The result shows that the temperature at the heating chamber reaches steady state temperature of 46.7°C within 40 seconds. The finding was further verified with experimental works through the fabrication of the planar LC heater (RF sensitive actuator) and micropump device using MEMS fabrication technique. The fabricated device delivers a minimum volume of 0.096 μL at the temperature of 29°C after being thermally activated for 10 s. The volume dispensed from the micropump device can precisely controlled by an increase of the electrical heating power within the cut-off input power of 0.22 W. Beyond the power, the heat transfer to the heating chamber exhibits non-linear behavior. In addition, wireless operation of the fabricated device shows successful release of color dye when the micropump is immersed in DI-water containing dish and excited by tuning the RF power.

     

Effective electrodeposition of poly(3,4-ethylenedioxythiophene)-based organic coating on metallic food packaging for active corrosion protection

Journal of Applied Electrochemistry - Modern technologies continuously need special materials with specific properties to adopt the desired application. Recently, numerous researches have been...     

Synthesis of HgI2 Nanoparticles and Nanorods by Laser Ablation in Liquid for Photodetector Applications: Effect of Laser Fluence

In this study, mercury iodide (HgI₂) nanoparticles (NPs) were synthesized by pulsed laser ablation in ethanol at laser fluences of 22.9, 33.1, and 43.3 J/cm². The effect of laser fluence on the structural and optical properties of HgI₂ NPs was studied. X-ray diffraction findings reveal that all synthesized HgI₂ samples were polycrystalline in nature with orthorhombic structure. Absorption peak was appeared at 474 nm and the optical energy gap of HgI₂ NPs decreases from 2.13 to 2.05 eV as laser fluence increased from 22.9 to 43.3 J/cm². Zeta potential (ZP) results confirm that the nanoparticles synthesized at 22.9 and 33.1 J/cm² have high degree of stability. Fluorescence measurements show the presence of several emission bands. Raman spectra of HgI₂ NPs show the presence of six vibration modes centered at 15, 29, 37, 44, 51, and 70 cm^?1. Fourier transform infrared (FT-IR) results show the presence of two bonds, namely, C–O and Hg-I. Transmission Electron Microscope (TEM) results showed that the formation of spherical nanoparticles for sample prepared at 22.9 J/cm², 25–75 nm in size. While the nanoparticles synthesized with 33.1 and 43.3 J/cm² exhibit nanorods and nanotubes morphologies, respectively. The dark I–V characteristics of β-HgI₂ NPs/Si heterojunction photodetectors show rectification properties and the junction quality depends on the laser fluence and the best junction characteristics was obtained for heterojunction prepared at 33.1 J/cm². The white light photosensitivity of the HgI₂/p-Si photodetectors was measured at reverse bias under different intensities. The maximum responsivity reached was 3.39A/W at 450 nm for photodetector prepared at 33.1 J/cm².

     

Rational Optimization of Dihydropyrimidinone-Quinoline Hybrids as Plasmodium falciparum Glutathione Reductase Inhibitors

A series of dihydropyrimidinone-based antimalarial compounds were designed and synthesised based on the previously identified amide-based quinoline hybrids which showed good resistance reversal ability against the resistant strain of Plasmodium falciparum. The aromatic ring on the dihydropyrimidinone of the original hits was exchanged for a methyl group to bring the molecular weights below 500 Da and also determine the effect of the aromatic ring count on the resistance reversal ability of the hybrids. Apart from the previously used amide bond, the hybrid linker was also extended to the triazole linker. Although the triazole linker is synthetically easier to access, the use of an amide linker seems to have an activity advantage. The synthesised compounds in addition to the previously identified hits were subjected to molecular docking particularly targeting the orthosteric site of Plasmodium falciparum glutathione reductase (PfGR) protein. The ligand with the best binding interaction was rationally optimised to increase its suitability as a competitive inhibitor against the cofactor of the PfGR. Two of the optimised ligands showed better binding affinities than the cofactor while one of the two ligands displayed hydrophobically packed correlated hydrogen-bond which is very important in maintaining the ligand stability within the protein. In silico ADME predictions of the synthesised compounds indicate that these compounds possess good pharmacokinetic properties.     

Rheology of natural fibers thermoplastic compounds: Flow length and fiber distribution

The presented study investigates the flow length and the corresponding fiber content distribution in the injection‐moulded natural fiber reinforced thermoplastics and its relation to fiber type and processing parameters such as injection pressure, temperature, injection rate and mould tempering by increasing die temperature. In this research, polypropylene compounds with nominally 30 wt % hemp and sisal fibers are investigated. The influence of the injection pressure (500 and 1000 bar), melt temperature (180°C, 200°C, and 220°C), and die temperature (23°C and 80°C) on the fiber content distribution all over the sample is investigated. An increasing linear trend of fiber content along the spiral length is observed as an evidence of a fiber/polymer multiflow system. A pattern for fiber content distribution with respect to the fiber length along the injected spiral can be distinguished, where the longer fibers are usually found at the end of the injected part and the shorter fibers remain near mould entrance point. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39861.     

On optimal filters with maximum number of constraints on amplitude and phase characteristics

For optimal filters specified amplitude and phase (or group delay) characteristics, it is required that all the free parameters of the transfer function be used for the approximation. To achieve this requirement, the number of constraints on the amlitude and phase characteristics is defined first on general interpolation bases. Constant or arbitrarily prescribed lowpass or bandpass group delay and amplitude characteristics are approximated in the maximally flat, ripple or mixed sense for lumped filters, whereas highpass and band rejection characteristics are also considered for distributed or sampled data filters. The relationship between the number of free parameters and the number of amplitude and phase constraints for a given degree is derived for non-reciprocal as well as for reciprocal lossy and reciprocal reactant cases. Conditions are derived for the distribution of free parameters between the passband and stopband amplitude and phase characteristics for transfer functions with Hurwitzian denominator and also for monotonic amplitude characteristics in the transition band. Some published separate and simultaneous approximation methods are evaluated and compared on the above bases. It is pointed out that some of these methods do not satisfy the above requirements, although the optimal solution would exhibit higher performances.     

The glass transition temperature of nitrated polystyrene/poly(acrylic acid) blends

Low-molecular-weight polystyrene was nitrated to different levels. The nitrated polystyrene was blended with different molecular weights of poly(acrylic acid), PAA. The glass transition temperatures (T_g) for the mixtures were investigated by differential scanning calorimetry. A single T_g was observed for all blends, indicating single-phase blends. In general, it was found that the T_g increases with molecular weight of PAA. The T_g values of the blends showed a positive deviation from the linear average T_g as a result of strong hydrogen bonding between the segments of the component polymers. The observed T_g values were not adequately represented by simple predictive equations or by single-parameter fitting equations. However, two-parameter fitting equations gave a reasonable representation of the data.