Rearrangement of the main chain of the organocobalt polymers

The polymers 3 having pyridine moieties in the main chain were synthesized by the reaction of the organocobalt polymers 1 having cobaltacyclopentadiene moieties in the main chain with various nitriles 2. When brown colored 1 and excess 2 were heated in tetrahydrofuran at 80 °C for 24 h and then at 150 °C for 12 h in a sealed tube, the polymers 3 were obtained by the precipitation with methanol in good yields. From the spectroscopic measurements, the resulting polymers 3 were found to contain 35 – 90% of the pyridine moieties depending on the structures of 1. Received: 7 July 1997/Revised: 14 August 1997/Accepted: 25 August 1997     

Retardation of volatile aldehyde formation in the exhaust of frying oil by heating under low oxygen atmospheres

Volatile aldehydes were generated in the exhaust of high-oleic safflower oil during heating at 180°C by spraying water into atmospheres with four levels of oxygen concentrations (2, 4, 10, and 20%). These aldehydes were quantitatively analyzed by HPLC after the conversion to 2,4-dinitrophenyl hydrazones. Ten alkanals (C₂ through C₁₀), eight 2-alkenals (C₃ through C₁₀) and three 2,4-alkadienals (C₇, C₉, and C₁₀) were found. These aldehyde levels were found to be positively correlated with both the heating time and the atmospheric oxygen concentration. The total amounts of aldehydes were the lowest in the oil heated in an atmosphere with 2% O₂, and corresponded to 1/10 of those in the atmosphere with 20% O₂. Acrolein was not found in oils heated in the atmosphere with 2% oxygen. These results suggest that frying in atmospheres with low oxygen levels can effectively decrease the generation of volatile aldehydes in the exhaust.     

High oleic acid oil suppresses lung tumorigenesis in mice through the modulation of extracellular signal-regulated kinase cascade

This study was undertaken to estimate the effect of dietary high oleic acid oil (OA) on 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK)-induced lung tumorigenesis in mice. Diet containing 10% oil was fed to mice through experimental periods. On day 30 after NNK injection (100 mg/kg body weight, i.p.), the treatment increased the level of prostaglandin E₂ (PGE₂) as well as proliferating cell nuclear antigen, a marker of cell proliferation in a high linoleic acid oil (LA)-fed group but not in an OA-fed group. The NNK treatment also induced the activation of an extracellular signal-regulated kinase (Erk) cascade (Erk, Mek and Raf-1) in an LA-fed group. On the other hand, OA feeding abolished the NNK-induced activation of the Erk cascade. In conjugation with these events, OA feeding reduced lung tumor incidence and tumor multiplicity (percentage of mice with tumors) in mice compared with LA feeding at the 20th experimental week. These results suggest that OA suppresses lung tumorigenesis and that this suppression is correlated with the inhibition of PGE₂ production and inactivation of the Erk cascade.     

Polymeric phosphonium salts as a novel class of cationic biocides. VII. Synthesis and antibacterial activity of polymeric phosphonium salts and their model compounds containing long alkyl chains

Various polymeric phosphonium salts containing long alkyl chains (C₁₀? C₁₈) and their corresponding model compounds were prepared, which possess the same hydrophobic structure as that of the common disinfectants (quaternary ammonium salts), and their antibacterial activities were evaluated by means of the viable cell counting method against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). The polymer with the decyl group exhibited a higher activity than that of the corresponding model compound, particularly against the Gram-positive strain. Furthermore, antibacterial activity of the polymers was found to decrease as the chain length increased. In contrast with the polymers, the antibacterial activity of the corresponding model compounds increased as hydrophobicity of the substituents increased. The antibacterial activity was strongly dependent on the structure, particularly on the length of the alkyl chain. © 1994 John Wiley & Sons, Inc.     

Corrosion of silicon nitride ceramics under hydrothermal conditions

Corrosion behaviour of Si₃N₄ ceramics containing Y₂O₃, Al₂O₃ and AIN as sintering aids was investigated under hydrothermal conditions at 200–300 C and saturated vapour pressures of water for 1–10 days. Hydrothermal corrosion resulted in the dissolution of the Si₃N₄ matrix and the formation of a product layer consisting of the original grain-boundary phases and hydrated silica. The dissolution rate of Si₃N₄ ceramics decreased with decreasing crystallinity of the grain-boundary phase. The dissolution rate could be adequately described by a parabolic plot in the initial stage of the reaction. The apparent activation energies were 83.5–108 kJ mol^–1, and the bending strength of the corroded samples decreased from 600 to 400 MPa in the initial stage of the reaction upto a weight loss of 0.004 g cm^–2, and then was almost constant up to a weight loss of 0.012 g cm^–2.     

Study on stiffness visualization and safety control based on will-consensus building for tele-palpation robot system

This paper proposes a method for visualizing the stiffness of a soft object in a palpation-support information system by the teleoperation of a robot hand. It is important that a palpation system display a body’s shape and stiffness. In our method, the stiffness of the contact area between the soft object and the robot finger is estimated by a recursive least-squares method with forgetting factor that uses an impedance dynamics model. With the estimated stiffness and direction of contact force, we calculate the scalar parameter for visualization of stiffness. Moreover, we propose a safety control method for the palpation system, which is part of a tele-control method based on will-consensus building. The system configuration, estimated algorithm, and experimental results are presented.     

A new optical elasticity resin for mobile LCD modules

Abstract— The display used in current cell phones has an air gap between the cover glass and the liquid‐crystal‐display (LCD) module to prevent the LCD glass from being damaged. Reflections at the boundaries of the air gap cause a reduction in the LCD luminance and contrast. To address this problem, a newly proposed LCD structure has been investigated. The “Super View Resin (SVR),” a transparent elastic resin which improves the shock resistance and visibility of the LCD, has been developed. Filling the air gap between the cover glass and LCD module with a refractive‐index‐matching resin solves the light‐reflection problem inherent in the use of a reinforced cover‐glass lens. Moreover, the elastic filler works as a damper, reducing any external shock, which prevents not only the cover glass and LCD module from being damaged, but also the glass from being shattered when it is broken.     

Revolving Vernier Mechanism Controls Size of Linear Homomultimer

A new kind of the Vernier mechanism that is able to control the size of linear assembly of DNA origami nanostructures is proposed. The mechanism is realized by mechanical design of DNA origami, which consists of a hollow cylinder and a rotatable shaft in it connected through the same scaffold. This nanostructure stacks with each other by the shape complementarity at its top and bottom surfaces of the cylinder, while the number of stacking is limited by twisting angle of the shaft. Experiments have shown that the size distribution of multimeric assembly of the origami depends on the twisting angle of the shaft; the average lengths of the multimer are decamer, hexamer, and tetramer for 0°, 10°, and 20° twist, respectively. In summary, it is possible to affect the number of polymerization by adjusting the precise shape and movability of a molecular structure.     

Phylogenetic analyses of the matrix and non-structural genes of equine influenza viruses

Matrix (M) and nonstructural (NS) genes of thirteen equine H3N8 and H7N7 influenza viruses were sequenced and analyzed from an evolutionary point of view. The M and NS genes of H3N8 viruses isolated between 1989 and 1993 evolved into two minor branch clusters, including isolates from Europe and the American continent, respectively. It was noteworthy to reveal that the nucleotide sequences of the M and NS genes of an earlier American strain showed highest homology to those of recent European viruses. "Frozen evolution" was observed in the M and NS genes of A/eq/LaPlata/1/88. It was also evident that the NS gene of an H7N7 virus from 1977 was very similar to that of a 1979-H3N8 virus, while the M gene was closest phylogenetically to that of the earliest H7N7 virus isolated in 1956. Furthermore, the M2 protein of A/eq/Newmarket/1/77 virus contained a carboxyl terminal deletion of three amino acids. The evolutionary rates of the M and NS genes of H3N8 equine influenza viruses were estimated to be 5.4 x 10(-4) and 5.1 x 10(-4) substitutions per site per year, respectively, which were slower than those of human viruses.     

Gender differences in hand stability of normal young people assessed at low force levels

To examine gender differences in hand stability, finger position and force holding tasks at low force levels were conducted with 30 male and 30 female young adults. Total fluctuation was defined as the standard deviation of measured data and fluctuation and the 10-Hz component of the physiological tremor were compared between maleand female subjects. In all tasks, the total fluctuation and the 10-Hz tremor were significantly larger in male subjects than females. On average, the fluctuation was 1.3 times larger and the 10-Hz tremor was 1.6 times larger. The results of this study suggest that women have superior hand stability compared with men at low force levels. Finger length, maximal voluntary contraction and surface electromyography were also measured and factors related to gender differences in hand stability are discussed. STATEMENT OF RELEVANCE: Hand stability is crucial for precise manual operations. This study demonstrated gender differences in hand steadiness at low force levels. Though hand dexterity cannot be explained only by hand stability, the results of this study are useful not only for occupational aptitude tests but also for neuropsychological tests.