PMMA tacticity and alumina powder dispersion stability

Summary Sedimentation experiments and X-ray photoelectron spectroscopy (XPS or ESCA) analyses have been used to study the effect of poly(methylmethacrylate) (PMMA) tacticity on aluminum oxide powder dispersion stability in a common solvent medium. The relative trends from sedimentation densities, and from surface analyses after solvent washing show that (PMMA) adsorption is greatest with isotactic polymer, where isotactic>atactic>syndiotactic adsorption. These results suggest that surface adsorption and hence dispersion stability can be influenced by polymer chain configuration as well as by chain conformation.     

89-GHz fT room-temperature silicon MOSFETs

The authors report the implementation of deep-submicrometer Si MOSFETs that at room temperature have a unity-current-gain cutoff frequency (f_T) of 89 GHz, for a drain-to-source bias of 1.5 V, a gate-to-source bias of 1 V, a gate oxide thickness of 40 Å, and a channel length of 0.15 μm. The fabrication procedure is mostly conventional, except for the e-beam defined gates. The speed performance is achieved through an intrinsic transit time of only 1.8 ps across the active device region     

火电厂实施废水零排放的可行性探讨

对合肥发电厂的用排水现状进行了介绍，并提出了实施废水零排放的可行性方案。     

Dynamic Bending Strains in Planar Trusses with Pinned or Rigid Joints

The method of reverberation ray matrix is applied to analyze the dynamic behavior of structural members in trusses with pinned joints subjected to suddenly applied force. The results are compared with those in planar trusses with rigid joints. Detailed calculations are made with two types of trusses, a small laboratory model made of slender aluminum bars, and a hypothetical real size Pratt truss made of structural steel. It is found that the maximum dynamic bending strains in the members of both types of trusses are very large, comparable with the dynamic axial strains in the same member. The magnitudes of bending strains in the pinned truss differs little from those in the truss with rigid joints for both types of trusses. Such a large dynamic bending strain in a structure member, which is contradictory to the static behavior of the same truss, could be caused by the inertial force of the mass in structural members of the truss.     

Low cycle fatigue and creep behavior of recrystallized Molybdenum near room termperature

The deformation behavior of pure recrystallized molybdenum under cyclic and static loads was investigated in the temperature range between 30°C and 10O°C, for stress amplitudes between 100 MPa and 250 MPa and for static loads up to 200 MPa. The results show that in spite of the low test temperatures and stress levels the Mo material exhibits considerable plastic strains which depend sensitively on frequenez and small changes in temperature.The activation energy deduced for the static and dynamic deformation is less than 0.98 eV which indicates thermally activated processes, to be explained by a dislocation kink model as described in the literature. The low-temperature fatigue behavior appears strongly influenced by creep-fatigue interaction phenomena.     

Long-term immunity to poliovirus in children immunized with live attenuated and enhanced-potency inactivated trivalent poliovirus vaccines

Eighty-six children who completed immunization with the two trivalent poliovirus vaccines, live attenuated (OPV) and enhanced potency inactivated (EIPV), in one of four schedules (OPV-OPV-OPV, EIPV-EIPV-EIPV, EIPV-OPV-OPV, and EIPV-EIPV-OPV) at 1 year of age were monitored serologically over the subsequent 4 years and challenged with OPV at 5 years of age. Each of the immunization groups exhibited an initial 10- to 100-fold decline in neutralizing antibody to poliovirus types 1, 2, and 3 during the first 2 years of follow-up; thereafter antibody titers stabilized. The EIPV-EIPV-OPV group maintained the highest antibody levels throughout the observation period, including the response to OPV challenge at 5 years of age. These data suggest that immunization with OPV, EIPV, and combinations of the two vaccines confers long-term immunity. Optimal systemic immunity was associated with two or more doses of EIPV.     

Human papillomavirus-specific serologic response in vulvar neoplasia

We describe a case of positional dyspnea due to compression of the tracheobronchial tree by an extensive thoracic aneurysm. In a 77-year-old woman with long-standing systemic hypertension, intermittent anterior chest pain gradually developed over several years. She had no history of asthma or thoracic trauma. She was admitted to our hospital because of sudden, severe shortness of breath. The breathlessness was markedly worse when she lay on her back or on her right side. On physical examination, she was in acute respiratory distress with cyanosis, severe hypertension (180/110 mmHg), tachycardia, and inspiratory stridor. A chest X-ray film showed loss of volume and nearly complete radiopacity of the left hemithorax. Arterial blood gas analysis revealed an arterial oxygen partial pressure of 54.8 mmHg, a carbon dioxide partial pressure of 39.8 mmHg, and an oxygen saturation of 84.5 percent on room air. Computed tomographic examination of the thorax showed dilation of the aortic arch and descending aorta, and marked compression of the trachea and the left main bronchus. Examination with a fiberoptic bronchoscope revealed extrinsic compression of the trachea just proximal to the carina. The patient's symptoms stabilized. However, she did not undergo surgery because of her age and because of the size of the aneurysm. She died due to rupture of the aneurysm.     

Synthesis and characterization of poly(siloxane-urethane)s

A series of polyurethane block copolymers based on hydroxy-terminated polydimethylsiloxane and poly(propylene glycol) soft segments of molecular weights 1818 and 2000, respectively, were synthesized. The hard segments consisted of 4,4′-diphenylnethane diisocyanate and 1,4-butanediol as the chain extender. Samples with different molar ratios were prepared. We tried to synthesize polydimethylsiloxane-based polyurethanes (PDMS-PU) containing a hard block as major fraction and a soft block as minor fraction for preparing toughened rigid systems. After a study of the pure polydimethylsiloxane-based polyurethane and poly(propylene glycol)-based polyurethane (PPG-PU), (mixed polyol)-based block copolymers and blends of PDMS-PU and PPG-PU were synthesized, and characterized by means of differential scanning calorimetry, tensile testing and scanning electron microscopy. In (mixed polyol)-based copolymers and lower hard-segment content blends, macro-phase separation occurred, but blends with higher hard-segment contents showed significant reduction in amounts of phase separation.