受激布里渊散射(SBS)中的三类介质

介绍了目前使用的三类受激布里渊散射介质的化学结构及其SBS性能．并且分析了受激布里渊散射对介质的要求，     

Digital Laser Micropainting for Reprogrammable Optoelectronic Applications

Structural coloration is closely related to the progress of innovative optoelectronic applications, but the absence of direct, on-demand, and rewritable coloration schemes has impeded advances in the relevant area, particularly including the development of customized, reprogrammable optoelectronic devices. To overcome these limitations, a digital laser micropainting technique, based on controlled thin-film interference, is proposed through direct growth of the absorbing metal oxide layer on a metallic reflector in the solution environment via a laser. A continuous-wave laser simultaneously performs two functions—a photothermal reaction for site-selective metal oxide layer growth and in situ real-time monitoring of its thickness—while the reflection spectrum is tuned in a broad visible spectrum according to the laser fluence. The scalability and controllability of the proposed scheme is verified by laser-printed painting, while altering the thickness via supplementary irradiation of the identical laser in the homogeneous and heterogeneous solutions facilitates the modification of the original coloration. Finally, the proof-of-concept bolometer device verifies that specific wavelength-dependent photoresponsivity can be assigned, erased, and reassigned by the successive application of the proposed digital laser micropainting technique, which substantiates its potential to offer a new route for reprogrammable optoelectronic applications.     

Effect of multiple reflows on interfacial reaction and shear strength of Sn-Ag electroplated solder bumps for flip chip package

The effect of displacement rate and intermetallic compound (IMC) growth on the shear strength of electroplated Sn-2.5Ag (in wt.%) flip chip solder with Cu under-bump metallization (UBM) were investigated after multiple reflows. Cu₆Sn₅ IMC was formed at the interface after one reflow. After five reflows, two different IMC layers, consisting of a scallop-shaped Cu₆Sn₅ phase and a planar Cu₃Sn phase, and their thicknesses increased with increasing reflow number up to 10. The shear strengths peaked after four reflows, and then decreased with increasing reflow number. Increasing displacement rate increased the shear force. The tendency toward brittle fracture characteristics was intensified with increasing displacement rate and reflow number.     

Selective wet etching of p-GaN for efficient GaN-based light-emitting diodes

The selective wet etching of a p-GaN layer by using a solution of KOH in ethylene glycol (KE) was studied to enhance the optical and electrical performance of the GaN-based light-emitting diodes (LEDs). The surface of the p-GaN, which was selectively etched in the KE solution, showed hexagonal-shaped etch pits. The light-output power of etched LEDs was improved by 29.4% compared to that of the nonetched LED. This improvement was attributed to the increase in the probability of photons to escape due to the increased surface area of textured surface and the reduction in contact resistance of the ohmic layer resulting from the increased contact area and hole concentration on the textured p-GaN. The reverse leakage current of the LED was also greatly decreased due to the surface passivation and the removal of defective regions from the p-GaN.     

On proportional fairness of uplink spectral efficiency in cell‐free massive MIMO systems

This paper is concerned with the proportional fairness (PF) of the spectral efficiency (SE) maximization of uplinks in a cell‐free (CF) massive multiple‐input multiple‐output (MIMO) system in which a large number of single‐antenna access points (APs) connected to a central processing unit (CPU) serve many single‐antenna users. To detect the user signals, the APs use matched filters based on the local channel state information while the CPU deploys receiver filters based on knowledge of channel statistics. We devise the maximization problem of the SE PF, which maximizes the sum of the logarithm of the achievable user rates, as a jointly nonconvex optimization problem of receiver filter coefficients and user power allocation subject to user power constraints. To handle the challenges associated with the nonconvexity of the formulated design problem, we develop an iterative algorithm by alternatively finding optimal filter coefficients at the CPU and transmit powers at the users. While the filter coefficient design is formulated as a generalized eigenvalue problem, the power allocation problem is addressed by a gradient projection (GP) approach. Simulation results show that the SE PF maximization not only offers approximately the achievable sum rates as compared to the sum‐rate maximization but also provides an improved trade‐off between the user rate fairness and the achievable sum rate.     

Affine-permutation invariance of 2-D shapes.

Shapes provide a rich set of clues on the identity and topological properties of an object. In many imaging environments, however, the same object appears to have different shapes due to distortions such as translation, rotation, reflection, scaling, or skewing. Further, the order by which the object's feature points are scanned changes, i.e., the order of the pixels may be permuted. Relating two-dimensional shapes of the same object distorted by different affine and permutation transformations is a challenge. We introduce a shape invariant that we refer to as the intrinsic shape of an object and describe an algorithm, BLAISER, to recover it. The intrinsic shape is invariant to affine-permutation distortions. It is a uniquely defined representative of the equivalence class of all affine-permutation distortions of the same object. BLAISER computes the intrinsic shape from any arbitrarily affine-permutation distorted image of the object, without prior knowledge regarding the distortions or the undistorted shape of the object. The critical step of BLAISER is the determination of the shape orientation and we provide a detailed discussion on this topic. The operations of BLAISER are based on low-order moments of the input shape and, thus, robust to error and noise. Examples illustrate the performance of the algorithm.     

Toward Stable Cycling of a Cost-Effective Cation-Disordered Rocksalt Cathode via Fluorination

The recently developed Li-excess cation-disordered rock salts (DRXs) exhibit an excellent chemical diversity for the development of alternative Co/Ni-free high-energy cathodes. Herein, the synthesis of a highly fluorinated DRX cathode, Li_1.2Mn_0.6Ti_0.2O_1.8F_0.2, based on cost-effective and earth-abundant transition metals, via a solid-state reaction, is reported. The fluorinated DRX cathode using ammonium fluoride precursor exhibits more uniform particle size and delivers a specific discharge capacity of 233 mAh g⁻¹ and specific energy of 754 Wh kg⁻¹, with 206 mAh g⁻¹ retained after 200 cycles. The combined synchrotron X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy analysis reveals that the remarkable cycling performance is attributed to the high fluorination and thus enhanced Mn content, enabling the utilization of more Mn redox than the oxide analog. This study demonstrates a great promise to develop next-generation cost-effective DRX cathodes with enhanced capacity retention for high-energy Li-ion batteries.     

基于激光扫描技术的三维模型重建

通过分析三维激光扫描系统获取的点云数据,得到了利用点云数据构建三维模型的技术、方法和流程。介绍了利用地面三维激光扫描仪获取点云数据的过程以及结合RiSCAN PRO软件和Geomagic Studio软件进行建模的方法。对原始测量的点云数据进行处理(去除噪声,平滑,对多站点数据做拼接配准,提取目标建筑物等)得到正确和完整的目标建筑物的表面信息,然后构建三角网建立它的三维表面模型,最后通过所拍的照片进行纹理映射得到真实的三维模型。实验结果表明,利用上述方法可以有效地处理三维激光扫描获取的点云数据,实现对建筑物快速三维可视化建模。     

Bioinspired Interlocked and Hierarchical Design of ZnO Nanowire Arrays for Static and Dynamic Pressure‐Sensitive Electronic Skins

The development of electronic skin (e‐skin) is of great importance in human‐like robotics, healthcare, wearable electronics, and medical applications. In this paper, a bioinspired e‐skin design of hierarchical micro‐ and nano‐structured ZnO nanowire (NW) arrays in an interlocked geometry is suggested for the sensitive detection of both static and dynamic tactile stimuli through piezoresistive and piezoelectric transduction modes, respectively. The interlocked hierarchical structures enable a stress‐sensitive variation in the contact area between the interlocked ZnO NWs and also the efficient bending of ZnO NWs, which allow the sensitive detection of both static and dynamic tactile stimuli. The flexible e‐skin in a piezoresistive mode shows a high pressure sensitivity (?6.8 kPa^?1) and an ultrafast response time (<5 ms), which enables the detection of minute static pressure (0.6 Pa), vibration level (0.1 m s^?2), and sound pressure (≈57 dB). The flexible e‐skin in a piezoelectric mode is also demonstrated to be able to detect fast dynamic stimuli such as high frequency vibrations (≈250 Hz). The flexible e‐skins with both piezoresistive and piezoelectric sensing capabilities may find applications requiring both static and dynamic tactile perceptions such as robotic hands for dexterous manipulations and various healthcare monitoring devices.