Immobilization of pamidronic acids on the nanotube surface of titanium discs and their interaction with bone cells

Self-assembled layers of vertically aligned titanium nanotubes were fabricated on a Ti disc by anodization. Pamidronic acids (PDAs) were then immobilized on the nanotube surface to improve osseointegration. Wide-angle X-ray diffraction, X-ray photoelectron microscopy, and scanning electron microscopy were employed to characterize the structure and morphology of the PDA-immobilized TiO₂ nanotubes. The in vitro behavior of osteoblast and osteoclast cells cultured on an unmodified and surface-modified Ti disc was examined in terms of cell adhesion, proliferation, and differentiation. Osteoblast adhesion, proliferation, and differentiation were improved substantially by the topography of the TiO₂ nanotubes, producing an interlocked cell structure. PDA immobilized on the TiO₂ nanotube surface suppressed the viability of the osteoclasts and reduced their bone resorption activity.     

Polyacrylonitrile solution homogeneity study by dynamic shear rheology and the effect on the carbon fiber tensile strength

Poly(acrylonitrile‐co‐methacrylic acid) (PAN‐co‐MAA)/N,N‐dimethylformamide (DMF) solutions were prepared and dynamic shear rheology of these solutions were investigated. With increasing stirring time up to 72 h at 70°C, the polymer solution became less elastic (more liquid‐like) with a ～60% reduction in the zero‐shear viscosity. Relaxation spectra of the PAN‐co‐MAA/DMF solutions yield a decrease in relaxation time (disentanglement time, τ_d), corresponding to an about 8% decrease in viscosity average molecular weight. The log‐log plot of G′ (storage modulus) versus G″ (loss modulus) exhibited an increase in slope as a function of stirring time, suggesting that the molecular level solution homogeneity increased. In order to study the effect of solution homogeneity on the resulting carbon fiber tensile strength, multiple PAN‐co‐MAA/DMF solutions were prepared, and the precursor fibers were processed using gel‐spinning, followed by continuous stabilization and carbonization. The rheological properties of each solution were also measured and correlated with the tensile strength values of the carbon fibers. It was observed that with increasing the slope of the G′ versus G″ log‐log plot from 1.471 to 1.552, and reducing interfilament fiber friction during precursor fiber drawing through the addition of a fiber washing step prior to fiber drawing, the carbon fiber strength was improved (from 3.7 to 5.8 GPa). This suggests that along with precursor fiber manufacturing and carbonization, the solution homogeneity is also very important to obtain high strength carbon fiber. POLYM. ENG. SCI., 56:361–370, 2016. © 2016 Society of Plastics Engineers     

Dicarbonylruthenium(II) complexes of diphosphine ligands and their catalytic activity

The hexa-coordinated chelate complexes of the type [Ru(CO)₂Cl₂(P-P)](1a,b) [where P-P = 9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene(a) and [bis(2-diphenylphosphinophenyl)ether(b)] have been synthesized by reacting the polymeric precursor [Ru(CO)₂Cl₂]_n with the ligands in 1:1 molar ratio. The complexes 1a,b are characterized by elemental analyses, Mass, IR and NMR spectroscopy together with the single crystal X-ray structure determination of 1a. The compound 1a crystallizes in a monoclinic system with space group C2/c showing a slightly distorted octahedral geometry around the Ru centre. The complexes 1a and 1b are thermally stable up to 300 °C and exhibit high catalytic activity in transfer hydrogenation of aldehyde and ketones to corresponding alcohols. The complexes 1a and 1b show much higher catalytic activity for the hydrogenation of aldehyde than ketones. In general, the catalytic efficiency of 1b is higher compared with 1a.     

Controlling selectivity in catalysis: Selective greener oxidation of cyclohexene under microwave conditions

A smart and greener microwave approach to the selective oxidation of cyclohexene is reported whereby, depending on the reaction conditions, the epoxide (65% conversion, 75% selectivity), the enol (70% conversion, 80% selectivity) or the enone (>99% conversion, 89% selectivity) can be obtained in a short period of time ranging from 1 to 20 min. A cobalt-salen-SBA-15 material was employed as catalyst. The reported solventless microwave protocol was simple, greener and more efficient compared to any other reported cyclohexene oxidations.     

Incidence and genetic variability of Listeria species from three milk processing plants

The presence of Listeria in three milk processing environments as a potential source of milk contamination was assessed. Swab samples (n = 210) taken from milk processing plants were examined. Sample sites included the milk processing equipment, besides areas handling raw and pasteurized milk. The USDA Listeria-selective enrichment procedure was used to process the samples. Forty one (19.52%) Listeria isolates were recovered. The isolates were further subjected to biochemical and genotypic characterization. Out of 41 isolates, 16 (7.62%) were confirmed as Listeria monocytogenes, 2 (0.95%) as L. ivanovii, 19 (9.05%) as L. innocua. 1 (0.48%) as L. seeligeri and 3 (1.43%) as L. grayi. All the L. monocytogenes isolates were positive for the hlyA gene. PCR based serotyping revealed all L. monocytogenes to be of 1/2a, 1/2c, 3a and 3c serovar group. AscI and ApaI restriction analysis yielded four PFGE clusters for 16 L. monocytogenes isolates obtained from raw milk collector, milk silos, buttermilk mixer, cheese and other milk product processor. No predominant PFGE cluster was observed among these L. monocytogenes isolates. The main sources of L. monocytogenes were found to be raw milk collector and milk silos. In the present study L. monocytogenes was isolated from milk and milk products processing plants which could cross-contaminate the processed products and may possess a potential threat to public health.     

Study of Au, Ni-(n)ZnSe Thin Film Schottky Barrier Junctions

Schottky barrier junctions of Al-doped n-type Zinc selenide (ZnSe) thin films of doping concentrations up to 9.7 × 10¹⁴ cm ^?3 have been fabricated with Au and Ni electrodes on glass substrates by sequential thermal evaporation. All of the junctions of different doping concentrations exhibited rectifying current-voltage characteristics with a non-saturating reverse current. From the current-voltage characteristics, the different junction parameters such as ideality factor, saturation current density, series resistance, etc., were measured. Both types of junctions were found to possess a high ideality factor and a high series resistance. The barrier heights of the junctions were measured from Richardson plots and found to be around 0.8 eV. The structures were found to exhibit a poor photovoltaic effect with a fill factor not greater than 0.4. The diode quality as well as the photovoltaic performance of the diodes were improved following a short heat treatment in vacuum.     

Neo Arithmetic and Ranking Techniques for Trapezoidal Generalized Interval Valued Fuzzy Numbers: Their Applications in Decision Making for Medical Investigation

Neural Processing Letters - The uncertainty caused mainly by the deficiency of precision and data, artificial/human-made errors, information accessed from expert opinions or very miniature size of...     

Extreme Specific Stiffness Through Interactive Cellular Networks in Bi-Level Micro-Topology Architected Metamaterials

Architected lattice materials, realized through artificial micro-structuring, have drawn tremendous attention lately due to their enhanced mechanical performances in multifunctional applications. However, the research area on the design of artificial microstructures for the modulation of mechanical properties is increasingly becoming saturated due to extensive investigations considering different possibilities of lattice geometry and beam-like network design. Thus, there exists a strong rationale for innovative design at a more elementary level. It can enhance and grow the microstructural space laterally for exploiting the potential of geometries and patterns in multiple length scales, and the mutual interactions thereof. A bi-level design is proposed, where besides having the architected cellular networks at an upper scale, the constituting beam-like members at a lower scale are further topology-engineered for most optimum material utilization. The coupled interaction of beam-level and lattice-level architectures can enhance the specific elastic properties to an extreme extent (up to ≈25 and 20 times, depending on normal and shear modes, respectively), leading to ultra-lightweight multifunctional materials for critical applications under static and dynamic environments.     

Rare association rule mining from incremental databases

Pattern Analysis and Applications - Rare association rule mining is an imperative field of data mining that attempts to identify rare correlations among the items in a database. Although numerous...     

Analysis of Elevated Temperature Flow Behavior of 316LN Stainless Steel Under Compressive Loading

To understand the flow behavior of a newly developed austenitic stainless steel 316LN with 0.14 wt% nitrogen, isothermal compression tests have been carried out in the hot working domain. From the analysis of flow behavior, it is observed that the nitrogen enhanced steel, in its hot working domain exhibits strain and strain rate hardening with thermal softening. The flow behavior analysis also demonstrates the coupled effect of strain–temperature and strain rate temperature on the flow stress. To depict the flow behavior of the material, strain compensated Arrhenius (SCA) equation and Model D8A have been used. The SCA predicts the flow curves with an average absolute error of 9.27% and a correlation coefficient of 0.977, whereas the prediction by Model D8A gives the average absolute relative error as 10.86% with a correlation coefficient of 0.966. For high temperature and intermediate strain rate, both Model D8A and SCA equation depict the flow behavior of 316L (0.14)N SS with good correlation and generalization. However, at low temperature and high strain rate domain, both the models are unable to depict the behavior; this is attributed to the fact that the material shows two slope behaviors where the constants have been calculated assuming a linear relationship between stress and strain rate.