Calculation methods for comparing the performance of pure and mixed working fluids in heat pump applications

Three methods for comparing cycle performance of working fluids, pure as well as non-azeotropic mixtures, are investigated for two applications and for two mixture pairs, HCFC22-CFC114 and HCFC22-HCFC142b, and their pure components. The methods differ in the way of calculating the heat exchange processes. They assume, respectively, equal minimum approach temperatures, equal mean temperature differences and equal heat transfer areas. Changes of coefficient of performance (COP) with composition are explained for all methods. It is shown that transport properties must be taken into account when making rigorous comparisons between working fluids. To predict the relations between fluids with high accuracy, one must use the method with equal heat transfer areas. By the method with equal mean temperature differences, the COP can be estimated with the same accuracy for mixtures as for pure fluids, and can be used for rough estimations of the COP level with different fluids. The method of equal minimum approach temperatures should be avoided for non-azeotropic mixtures.     

Transient thermal performance of line traps

This paper develops a transient thermal model for line traps. The model was incorporated into a computer program that numerically integrates the governing nonlinear differential equation in time to predict critical temperatures and component short and long term ratings for a wide range of operating conditions. The model accounts for many factors including: variable air properties, variable material properties, environmental conditions, and a wide variety of component geometries and orientations. To verify the temperatures predicted by the thermal model, The Georgia Power Research Center carried out an extensive series of indoor laboratory tests to experimentally measure temperatures of energized line traps under transient loading conditions. Model predictions were within 8°C for 75 percent of the data. This paper presents the development of the governing equations and describes in detail the calculation of the convective and radiative components of heat transfer. Comparisons of the model predictions for two different line trap designs in different orientations to experimental data are presented to demonstrate the accuracy and flexibility of the thermal model     

Research in object-oriented manufacturing simulations:an assessment of the state of the art

Object-oriented programming (OOP) has been revolutionizing software development and maintenance. When applied to simulation of manufacturing systems, OOP also provides an opportunity for developing new ways of thinking and modeling. In this paper, we identify existing large-scale, persistent OOP-based research efforts focusing on manufacturing system simulation, and present an integrating framework for discussing the associated modeling abstractions, implementation strategies, common themes, and distinctive features. The goal is to identify the fundamental research and application issues, assess the current state of the art, and identify key research needs.     

Microwave Drymg of Grapes in a Single Mode Cavity at 2450 Mhz - i: Drying Kinetics

Grapes were dried into raisins using combined microwave and convective drying in a single mode cavity specially designed for the studies. Effect of processing parameters, viz.microwave power density (P) air temperature (T) and velocity (u) on drying kinetics was studied in an effort to optimize the operating conditions. The individual and interactive effects of these variables were srudied using three levels of P, four levels of T and two levels of u. Higher drying rates observed with the higher P and T were atuibuted to the increased product temperature and higher partial vapour pressure difference between the surface of the fruit and the air stream. Increase of air velocity increased the drying times. Low drying rate at higher air velocity was attributed to decreased fruit temperature due to rapid convective heat mnsfer at the surface.     

Design of wavelength-flattened coupler using a novel diagram

A novel diagram which describes the condition of 3 dB coupler is proposed. Using the proposed diagram, the design of a wavelength-flattened 3 dB directional coupler composed of a uniform coupled waveguide is investigated. Normalized waveguide parameters are introduced to characterize a five-layer planar waveguide. This enables us to generalize the discussion and to reduce the number of parameters required for characterizing a coupled waveguide. A broadband 3 dB coupler having 50±5% coupling ratio over a wavelength range of 1.1-1.7 μm is designed     

Violence in psychiatric hospitals: are certain staff prone to being assaulted?

BACKGROUND: A number of enzymatic techniques have recently been developed to detect DNA fragmentation in apoptosis at the cellular level. However, since DNA fragmentation also occurs in cellular necrosis, we studied to which extent the use of DNA polymerase (nick translation) or terminal transferase (tailing) allows the differentiation between internucleosomal DNA degradation, typical for apoptosis, and the more random DNA destruction in necrosis. EXPERIMENTAL DESIGN: We compared these techniques on in vitro and in vivo models for apoptotic or necrotic cell death. Apoptosis of thymocytes in vitro was induced by gamma-irradiation, necrosis by the cytotoxic action of antibody and complement. Cell death in vivo was examined on paraffin-embedded tissue material from animals with autoimmune encephalomyelitis that served as a model for apoptosis, or in kainic acid-induced nerve cell degeneration as a model for necrosis. RESULTS: DNA fragmentation was visualized by the incorporation of labeled nucleotides into the nuclei of affected cells utilizing tailing or nick translation techniques. In the early stages of cell degeneration in vitro, cells undergoing apoptosis were preferentially labeled by tailing, whereas necrotic cells were identified by nick translation. Similarly, early stages of necrosis in vivo were preferentially detected by nick translation, whereas tailing was slightly more sensitive for the detection of apoptosis. Results obtained with these enzymatic techniques were in accord with the assessment of cell death by morphologic criteria. Both techniques could be applied in tissue samples even after prolonged fixation in paraformaldehyde if the sections were pretreated with proteinase K digestion. CONCLUSIONS: Our studies show that both in situ nick translation and in situ tailing are useful in detecting DNA fragmentation in cell suspensions and tissue sections. These techniques may help to define the molecular mechanisms leading to cell death in experimental conditions and eventually in human tissue.     

Macrophage migration inhibitory factor is a neuroendocrine mediator of endotoxaemia

The cytokine macrophage migration inhibitory factor (MIF) is a major protein constituent of the anterior pituitary gland released into the bloodstream during endotoxaemia. For many years, MIF had been thought to be a T cell product associated with delayed-type hypersensitivity reactions. The identification of MIF as a pituitary 'stress' hormone provides an important link in the regulation of systemic inflammatory responses by the central nervous system.