Enantioselective extraction of mandelic acid enantiomers based on chiral ligand exchange

Based on the chiral ligand exchange, the distribution behavior of mandelic acid enantiomers, and the partition of Cu^2 at different pH values were studied in a water/alcohol two-phase system containing Cu^2 and N-ndodecyl-L-proline(A). The influences of the solvent sort, the pH value, the concentrations of Cu^2 and chiral ligand on the partition coefficient(K) and separation factor(α) were discussed. The experimental results show that the A formed has more stable ternary complex with D-mandelic acid enantiomer than with L-mandelic acid enantiomer. There is an important influence of the pH value on K and a. When the pH values are less than 3.5, the formation of binary complexes is thermodynamically unfavourable. K and a become maximum when pH values are above 3.5 and the molar ratio of the chiral ligand to Cu^2 is 2:1.     

傅立叶变换在虚拟仪器LabVIE中的应用

文中介绍了LabVIEW环境下用NI公司高级分析库里的信号处理工具包的Real FFT.vi傅立叶变换,采用此种方法对某型飞机起落架液压测试系统采样信号进行频谱分析,实验证明其效果良好.     

一种高速浮点加法器的设计实现

浮点加法器是协处理器的核心运算部件，是实现浮点指令各种运算的基础，其设计优化是提高浮点运算速度和精度的关键途径。文章从浮点加法器算法和电路实现的角度给出设计方法，并且提出动态与静态结合设计进位链的方案以及前导O预测面积与速度的折衷方法。动态与静态结合设计进位链的方法有效地降低了功耗，提高了速度，改善了性能。目前已经嵌入协处理器的设计中，并且流片测试成功。     

不用专门相移装置的三维面形测量

提出一种不需要专用相移装置实现相移，主要利用数字图像处理技术实现三维面形测量的方法，研究结果表明，用原干涉图像及1幅以上的移值条纹图主可能实现物体三维面形的测量。     

Evaluating Liquefaction Strength of Partially Saturated Sand

A method is presented for evaluating the liquefaction strength of partially saturated sand using the compression wave velocity (P-wave velocity), a new indicator of saturation. Based on laboratory test results, an empirical correlation that relates the liquefaction strength with the pore pressure coefficient B is firstly proposed. The strength is defined as the cyclic stress ratio required to cause liquefaction at a specified number of cycles. With the aid of a theoretical relation between B and the P-wave velocity, an explicit correlation of more interest is then established between the liquefaction strength of sand and its P-wave velocity. A comparison of the predictions using this explicit correlation with laboratory measurements shows a satisfactory agreement. The significance of this method lies in that it makes it possible to evaluate the liquefaction strength of sand as affected by saturation through the measurement of P-wave velocity, which can be made not only in the laboratory but particularly in the field.     

光纤码分多址技术在城域接入网中的应用

分析了光纤码分多址技术O -CDMA在城域接入网中的应用。回顾了O -CDMA技术的发展历史 ,详细地介绍了O -CDMA技术的特点 ,其具有的公平性、灵活性、网络控制管理、对服务区处理能力以及高的安全性使O -CDMA技术成为较好的城域接入网技术。阐述了目前在应用中O -CDMA存在的一些技术方面的问题     

3DFD Simulation of Asymmetric Wave Field by Side-wall Acoustic Tool in Open and Cased Wells

1. Introduction Side-wall acoustic logging tools, such as the Segmented Bond Tool (SBT) from Baker Atlas and the tools for open hole measurements, utilize acoustic transducers mounted on six pads to make compensated acoustic velocity and attenuation measurements which are not affected by mud weight, gas cut, fast formation effects, casing surface conditions or reasonable tool de- centralizing. Studies on the wave fields generated by these tools are very important to tool design and data int…     

首饰狂想曲

俗活说，女人离不开首饰。这个说法虽然不尽全面，但对于大多数女性来说，漂亮的首饰总是她们孜孜以求的目标。[编者按]     

Impact of Aspen Log Storage with and without Protection on OSB Performance

Outdoor log storage without protection can change the mechanical and chemical properties of wood due to infection by various fungi. To understand how outdoor log storage affects the wood and, subsequently, the strandboard quality, two piles of aspen logs were set up outside and stored for a period of four months (July to November). One of the piles was treated with a biological solution to prevent fungal growth. The other one was stored without treatment. Both piles contained non-debarked and partially debarked logs. Evaluation of sap stain development indicated that all logs had been colonized by staining fungi with average stain coverage of 9.37 to 57.18% and maximum stain penetration of 3.58 to 7.27 cm over the log cross section. The variation of fungal colonization depended on log treatment and bark condition. The most effective way to prevent stain growth was the combination of biological treatment and partial debarking. A series of strandboard was prepared from fresh and aged aspen logs. All boards made from stored logs were statistically comparable to or superior to the control boards made from fresh aspen logs. The boards made from treated/partially debarked and untreated/non-debarked logs were statistically comparable to each other except for wet MOR. In addition, these two board types were statistically stronger than other boards made from treated/non-debarked and untreated/partially debarked logs in terms of IB and water resistance. Some individual stained strands were observed on the finished board surface. Less staining was found in the boards prepared from biologically treated and partially debarked logs, compared with those made from other stored logs.     

P油田长4+52小层孔隙度三维模型的建立

为了更准确的评价P油田主要产层长4 52小层的储集能力，以随机模拟建模方法对该层的孔隙度进行研究，建立孔隙度分布三维模型。研究表明，长4 52小层属于低孔储层，平均孔隙度为11．85％。根据P油田储层物性分类原则，该储层在本区分布较为广泛，是今后挖潜的重点。