Fuel properties and emissions of soybean oil esters as diesel fuel

The effects of using blends of methyl and isopropyl esters of soybean oil with No. 2 diesel fuel were studied at several steady-state operating conditions in a four-cylinder turbocharged diesel engine. Fuel blends that contained 20, 50, and 70% methyl soyate and 20 and 50% isopropyl soyate were tested. Fuel properties, such as cetane number, also were investigated. Both methyl and isopropyl esters provided significant reductions in particulate emissions compared with No. 2 diesel fuel. A blend of 50% methyl ester and 50% No. 2 diesel fuel provided a reduction of 37% in the carbon portion of the particulates and 25% in the total particulates. The 50% blend of isopropyl ester and 50% No. 2 diesel fuel gave a 55% reduction in carbon and a 28% reduction in total particulate emissions. Emissions of carbon monoxide and unburned hydrocarbons also were reduced significantly. Oxides of nitrogen increased by 12%.     

On wind turbine blade design optimization

A wind turbine with a horizontal rotation axis is considered in the stationary airflow. A problem of choosing the law of change of the setting angle of the cross section of the wind turbine blade and the value of the angular speed so that the wind energy utilization coefficient is maximal is discussed. Maximization of the respective functional is considered as a variational problem with a priori unknown parameter. Once it is solved numerically or analytically, the optimal value of this parameter is determined, with the sought variables given by rather simple formulas. The results are analyzed on a qualitative level. In particular, the setting angle is found to change monotonically along the blade, which is confirmed by practical wind turbine design. Examples of using the proposed approach to wind turbine blade design are considered.     

A glue method for fabricating membrane electrode assemblies for direct methanol fuel cells

We present a simple glue method for fabricating membrane electrode assemblies (MEA) for direct methanol fuel cells (DMFC). Rather than the conventional “dry” hot-pressing method that relies solely on hot-pressing at a high pressure and temperature to form a MEA, the “wet” method developed in this work introduces a binding agent, consisting of Nafion^® solution, between a polymer electrolyte membrane (PEM) and an anode/cathode. The introduced binding agent can provide a better adhesion and stronger binding force between a membrane and an electrode, thereby facilitating a better interfacial contact between the electrode and the Nafion^® membrane, which has been proved by scanning electron microscopy (SEM) analyses to the cross-sectional morphology of the MEA after long-term operation. The cell performance characterization showed the MEA fabricated by the glue method was more stable in cell performance than that fabricated by the conventional hot-pressing method. Cyclic voltammetry (CV) results also demonstrated the MEA fabricated by the glue method exhibited a higher electrochemical surface area (ESA) as a result of the improved interfacial contact between the Nafion^® membrane and the electrodes. Finally, the DMFC with the MEA fabricated by the glue method was characterized by the electrochemical impedance spectroscopy (EIS).     

Synthesis and physicochemical characterization of amphiphilic block copolymer self‐aggregates formed by poly(ethylene glycol)‐block‐poly(ϵ‐caprolactone)

Diblock copolymers with different poly(ε‐caprolactone) (PCL) block lengths were synthesized by ring‐opening polymerization of ε‐caprolactone in the presence of monomethoxy poly(ethylene glycol) (mPEG‐OH, MW 2000) as initiator. The self‐aggregation behaviors and microscopic characteristics of the diblock copolymer self‐aggregates, prepared by the diafiltration method, were investigated by using ¹H NMR, dynamic light scattering (DLS), and fluorescence spectroscopy. The PEG–PCL block copolymers formed the self‐aggregate in an aqueous environment by intra‐ and/or intermolecular association between hydrophobic PCL chains. The critical aggregation concentrations of the block copolymer self‐aggregate became lower with increasing hydrophobic PCL block length. On the other hand, reverse trends of mean hydrodynamic diameters were measured by DLS owing to the increasing bulkiness of the hydrophobic chains and hydrophobic interaction between the PCL microdomains. The partition equilibrium constants (K_v) of pyrene, measured by fluorescence spectroscopy, revealed that the inner core hydrophobicity of the nanoparticles increased with increasing PCL chain length. The aggregation number of PCL chain per one hydrophobic microdomain, investigated by the fluorescence quenching method using cetylpyridinium chloride as a quencher, revealed that 4–20 block copolymer chains were needed to form a hydrophobic microdomain, depending on PCL block length. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3520–3527, 2006     

Heat transfer and fluid flow characteristics in flash desalination units

The present work investigates the effects of different operating and geometrical parameters on the flashing efficiency of water in a single stage flashing chamber. This chamber uses a submerged rectangular orifice as flow control area. Experiments were performed to investigate the effects of flow rate, liquid level in the flashing chamber, liquid inlet temperature and flashing range, on the flashing efficiency under various design conditions. These comprise flow with baffle placed in the flashing chamber, and wire meshes placed at the orifice to increase the turbulence level.It was found that the efficiency increased with the increase of the turbulence levels, flashing range and liquid inlet temperature; the efficiency deceased with the increase of the flow rate and liquid level in the flashing chamber. The application of numerical procedure to predict flow pattern and heat transfer in the flashing chamber is introduced as a powerful design tool.     

Dolomite brick with free lime

Conclusions Technology has been devised for the production of dolomite brick was free lime. To obtain parts, pure dolomite with a high content of free calcium oxide and sufficient free magnesium oxide and a low content of alumina and sesquioxides, the latter in sufficient quantity to ensure sintering, should be used.Anhydrous binder P can be used as the bond since it enables strong green material to be obtained after drying.The green material should be dried in a drier with an extracting fan at 250–300°. The heat transfer agent should not contain water vapor.The parts should be fired at 1600° for 5 hours; the temperature rises to 250° during the first hour.     

Nitrogen fertilizer in leucaena alley cropping. II. residual value of nitrogen fertilizer and leucaena residues

Legume residues have been credited with supplying mineral nitrogen (N) to the associated cereal crop and improving soil fertility in the long term. Few studies using¹⁵N have reported the fate of legume N and fertilizer N in the presence of legume residues in soil-plant systems over periods of two years or longer. A field experiment was conducted in microplots to evaluate: (1) the residual value of the¹⁵N added in leucaena residues; (2) the residual value of fertilizer¹⁵N applied in the presence of unlabelled leucaena residues in the first year to maize over three subsequent years; and (3) the long-term fate of residual fertilizer and leucaena¹⁵N in a leucaena alley cropping system.There was a significant increase in maize production over three subsequent years after addition of leucaena residues. The residual effect of fertilizer N increased maize yield in the second year when N fertilizer was applied at 36 kg N ha^–1 in the first year in the presence of leucaena residues. Of the leucaena¹⁵N applied in the first year, the second, third and fourth maize crop recovered 2.6%, 1.8% and 1.4%, respectively. The corresponding values for the residual fertilizer¹⁵N were 0.7%, 0.4% and 0.3%. About 12–14% of the fertilizer¹⁵N added in the first year was found in the 200 cm soil profile over the following three years. This differed from the 38–41% of leucaena¹⁵N detected in the soil over the same period. Most of the residual fertilizer and leucaena¹⁵N in the soil was immobilized in the top 25 cm with less than 1% leached below 100 cm. More than 36% of the leucaena¹⁵N and fertilizer¹⁵N added in the first year was apparently lost from the soil-plant system in the first two years. No further loss of the residual leucaena and fertilizer¹⁵N was detected after two years.     

Corrosion protection of aluminium in acidic chloride solutions with nontoxic inhibitors

Corrosion kinetics of 99.6% aluminium covered by a thin spontaneously formed oxide film in hydrochloric acid solution with and without the presence of substituted N-aryl pyrroles was studied using electrochemical impedance spectroscopy and quasi steady-state polarization. Measurements were performed on a rotating disc electrode in an argon-deaerated solution in the temperature range 20 to 50°C. The addition of inhibitor considerably increases overvoltage of the cathodic process (HER) and shifts Ecorr to negative potential values. The activation energy of the hydrogen evolution reaction was Ea=50±5kJmol–1 and was not affected by the presence of inhibitor. The inhibitory action occurs by -bonding between the adsorbed inhibitor molecules and the electrode surface. The electrode coverage follows the Langmuir adsorption isotherm with an adsorption equilibrium constant K=1.1–2.64×105dm3mol–1. The adsorption of organic compound prevents the adsorption of chloride ions and slow down the rate of corrosion.     

Preparation, characterization and mechanical properties of epoxidized soybean oil/clay nanocomposites

New epoxidized soybean oil (ESO)/clay nanocomposites have been prepared with triethylenetetramine (TETA) as a curing agent. The dispersion of the clay layers is investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD and TEM data reveal the intercalated structure of ESO/clay nanocomposites has been developed. The thermogravimetric analysis exhibits that the ESO/clay nanocomposites are thermally stable at temperatures lower than 180 °C, with the maximum weight loss rate after 325 °C. The glass transition temperature, T_g, about 7.5 °C measured by differential scanning calorimetry (DSC) and T_g about 20 °C measured by dynamic mechanical study have been obtained. The difference in the T_g between DSC and dynamic measurements may be caused by different heating rate. The nanocomposites with 5-10 wt% clay content possess storage modulus ranging from 2.0×10⁶ to 2.70×10⁶ Pa at 30 °C. The Young's modulus (E) of these materials varies from 1.20 to 3.64 MPa with clay content ranging from 0 to 10 wt%. The ratio of epoxy (ESO) to hydrogen (amino group of TETA) greatly affects dynamic and tensile mechanical properties. At higher amount of TETA, the nanocomposites exhibit stronger tensile and dynamic properties.     

Marginal operation field of existing MSF distillation plants

The capability of existing MSF distillation desalination plants to increase or decrease production by increase or decrease of top brine temperature and brine recirculating flow rate, is technologically limited. The factors which limit the process were analyzed and compared in a practical test carried out on a 4546 m³/d production plant. The brine levels in evaporator stages were calculated and measured to avoid the vapour blowthrough between the stages and to insure the dynamic stability of the plant. There was an increase of 20% in production at 94% of the design brine flow rate, and a top brine temperature 16.6°C greater than the design value before reaching the unsealing limit.