Dietary effects on growth,plasma lipid and tissues of rats fed with non‐conventional oil of Telfairia occidentalis

The nutritional value of Telfairia occidentalis seed and seed oil available in local market was studied in rats. The average values of the proximate analysis on dry matter basis were 203 g kg^?1 crude protein, 536.3 g kg^?1 fat, 39 g kg^?1 ash, 95 g kg^?1 crude fibre and 43.7 g kg^?1 carbohydrate, while the moisture content was 75 g kg^?1. The mineral analyses showed that T occidentalis seeds contain potassium (3280 mg kg^?1), sodium (1230 mg kg^?1), magnesium (60.8 mg kg^?1), calcium (60.8 mg kg^?1) and iron (13.0 mg kg^?1). The oil extracted from the seed sample showed physicochemical properties that suggest its suitability for edible and industrial uses. The oil contained high levels of unsaturated fatty acids, oleic and linoleic, which accounted for 63.22% of total fatty acids recovered, while palmitic acid (27.4% of the oil by weight) was the most prevalent saturated fatty acid in the oil. No trace of eleostearic acid was detected in the oil. The effect on physical appearance, weight gain, organ weight, tissue and plasma cholesterol and triacylglycerol levels was determined in rats fed a diet containing 5% T occidentalis oil. These were compared with those of rats fed a control diet (0% T occidentalis oil) over an 8 week study period. Weekly monitoring of the rats showed good physical appearance and steady weight increase. The test rats were not anaemic and no mortality was recorded. While there was a significantly higher (p < 0.05) level of cholesterol in the heart of test rats compared with the control, there was a significantly lower (p < 0.05) plasma cholesterol level, suggesting that T occidentalis seed oil can be used to lower plasma levels of cholesterol. Histological examination of the sections of the heart, liver, kidney and spleen of the test rats revealed varying degrees of pathology. These include artherosclerotic changes in the walls of vasa vasori and lymphatics in the heart and hyaline degeneration of myofibrils, fatty infiltration of hepatocytes, and glomerular and tubular degeneration in the kidneys. These lesions may have been due to the effect of fatty acids, especially erucic acid, in the seed oil, which at 1.24% (less that the 5% conventional allowable limit for edible oils) may be intolerable for rats and may be unsuitable for human consumption. The seed oil may be used for industrial purposes such as soap making, lubrication and cosmetics for which it is well suited. Copyright © 2004 Society of Chemical Industry     

Structural evolution of Pd-capped Mg thin films under H2 absorption and desorption cycles

In this paper we present a study on the relation between the evolution, upon successive H₂ cycling, of the crystalline order and the H₂ sorption properties of Pd-capped textured Mg thin films grown on Si and glass substrates.     

Are working memory deficits in bipolar disorder markers for psychosis?

Working memory deficits have been identified in bipolar disorder, but there is evidence suggesting that these deficits may be markers for psychosis rather than affective disorder. The current study examined this issue by comparing two groups of individuals with bipolar disorder, one with psychotic features and one without psychotic features, with a group of normal controls. Working memory was conceptualized as a multicomponent system that includes auditory and visuospatial short-term stores, executive control processes, and an episodic buffer that allows for communication between short- and long-term memory stores (Baddeley & Logie, 1999). Results indicated that only executive control processes significantly differentiated the psychotic and nonpsychotic bipolar groups, although visuospatial working memory differentiated both bipolar groups from controls. The results support the idea that some aspects of working memory performance are markers for psychosis, while others may be more general markers for bipolar disorders. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Deposition of cubic boron nitride films on diamond-coated WC:Co inserts

Cubic boron nitride (cBN) thin films were deposited on diamond-coated tungsten carbide (WC) cutting inserts using electron cyclotron resonance (ECR) microwave plasma chemical vapor deposition (MPCVD). The effects of gas flow rate and substrate bias on the phase composition and structure of the BN films deposited on diamond surfaces were studied. It was revealed that both the cubic phase formation and the selective etching of hexagonal phase were controlled by modulating the hydrogen and boron trifluoride flow rate ratio. By the trial and error method the gas flow rate ratio and substrate bias voltage were optimized. Moreover the phase composition of the BN film was found to be affected by the thickness of diamond buffer layer and interrelated to the effective substrate bias. The hardness of the resulting cBN films reached the value of 70 GPa. In the synthesized coatings, the diamond beneath renders the best mechanical supporting capacity while the top cBN provides the superior chemical resistance and extreme hardness. The cBN/diamond bilayers deposited on WC inserts may serve as universal tool coatings for machining steels and other ferrous metals.     

Nuclear data sensitivity,uncertainty and target accuracy assessment for future nuclear systems

A sensitivity and uncertainty study has been performed to evaluate the impact of neutron cross-section uncertainty on the most significant integral parameters related to the core and fuel cycle. This work is a contribution to the feasibility assessment of innovative reactor and fuel cycle systems, proposed within the Generation IV initiative. Results of an extensive analysis indicate the most relevant parameters and show any potential significant problems arising from the quality of existing nuclear data, in the assessment of the systems considered. In order to perform these studies, uncertainty covariance data have been produced, mostly based on selected, high accuracy integral experiments. A target accuracy assessment has been also performed in order to evaluate nuclear data improvement requirements. The results of the assessment allows to give guidelines in order to define the most appropriate and effective strategy for data uncertainty reduction.     

Simulation, modeling, and crystal growth of Cd0.9Zn0.1Te for nuclear spectrometers

High-quality, large (10 cm long and 2.5 cm diameter), nuclear spectrometer grade Cd_0.9Zn_0.1Te (CZT) single crystals have been grown by a controlled vertical Bridgman technique using in-house zone refined precursor materials (Cd, Zn, and Te). A state-of-the-art computer model, multizone adaptive scheme for transport and phase-change processes (MASTRAP), is used to model heat and mass transfer in the Bridgman growth system and to predict the stress distribution in the as-grown CZT crystal and optimize the thermal profile. The model accounts for heat transfer in the multiphase system, convection in the melt, and interface dynamics. The grown semi-insulating (SI) CZT crystals have demonstrated promising results for high-resolution room-temperature radiation detectors due to their high dark resistivity (ρ≈2.8 × 10¹¹ Θ cm), good charge-transport properties [electron and hole mobility-life-time product, μτ_e≈(2–5)×10⁻³ and μτ_h≈(3–5)×10⁻⁵ respectively, and low cost of production. Spectroscopic ellipsometry and optical transmission measurements were carried out on the grown CZT crystals using two-modulator generalized ellipsometry (2-MGE). The refractive index n and extinction coefficient k were determined by mathematically eliminating the ∼3-nm surface roughness layer. Nuclear detection measurements on the single-element CZT detectors with ²⁴¹Am and ¹³⁷Cs clearly detected 59.6 and 662 keV energies with energy resolution (FWHM) of 2.4 keV (4.0%) and 9.2 keV (1.4%), respectively.     

Surface treatments and roughness properties of Ti-based biomaterials

Nowadays, the use of implanted devices is a well-acknowledged practice in the field of orthopaedic and dental surgery. Scientific research and clinical experience suggest that the successful exploitation of these devices mainly depends on osseointegration, considered as both anatomical congruency and load-bearing capacity. Indeed, the osseointegration process is influenced by a wide range of factors: anatomical location, implant size and design, surgical procedure, loading effects, biological fluids, age and sex, and, in particular, surface characteristics. For this reason, several attempts have been aimed at modifying implant surface composition and morphology to optimise implant-to-bone contact and improve integration. Preliminary interactions between implanted materials and biological environment are deemed to be governed by the surface properties; they control the amount and quality of cell adhesion on the surface and, consequently, cell/tissue growth. Thus, surface properties govern new bone tissue formation and implant osseointegration. This paper reviews the state of art in the field of physical, chemical and biochemical treatments commonly used on Ti-based biomaterials for the production of biomedical devices. In particular, roughness characteristics due to physical and chemical techniques are investigated; the development of biologically active surfaces by means of biochemical functionalisation is also considered.     

Magnetic resonance imaging of primary cardiomyopathies

Cardiomyopathies are diseases of the myocardium of unknown etiology associated with cardiac dysfunction. On the grounds of their morphology and pathophysiology, primary or idiopathic cardiomyopathies may be classified into a number of disorders; namely, hypertrophic cardiomyopathy, arrhythmogenic right ventricular cardiomyopathy, dilated cardiomyopathy, and restrictive cardiomyopathy. The term "secondary cardiomyopathies" is reserved to specific heart muscle diseases clinically very similar to primary cardiomyopathies. Cardiac magnetic resonance imaging has long been used to study cardiac morphology and, more recently, to assess blood flow, perfusion, and contractile function. The emerging role of magnetic resonance imaging for the understanding and treatment of primary cardiomyopathies cannot be underestimated. From a clinical point of view, an examination based on a single, efficient, and noninvasive MR study focusing on the clinically relevant features of cardiomyopathies is an objective and reproducible means for diagnosing and monitoring hypertrophic, arrhythmogenic, dilated, and restrictive cardiomyopathies.