Local dimming light‐guiding plate type backlight system using alignment‐controlled polymer‐dispersed liquid crystals

A new technology which enables a local brightness control according to the displayed images has been expected in the thin and lightweight backlight systems to improve a contrast ratio and power consumption of the liquid crystal displays (LCDs). In this paper, we have proposed a novel local‐dimming backlight system using alignment‐controlled polymer‐dispersed liquid crystals as a light‐guiding plate and investigated the forming conditions of polymer‐dispersed liquid crystals to achieve both a high‐luminance ratio and a fast response speed. As a result, we found that a luminance ratio and response speed of the backlight system can be improved by using bifunctional LC monomer materials and forming fine and rigid polymer network in the LCs, and achieved high luminance ratio of 16:1 and fast response time less than 0.5 ms. In addition, we fabricated the twisted nematic‐mode LCD using the local dimming light‐guiding plate‐type backlight based on this design, and successfully realized eight times higher contrast ratio than that of the traditional twisted nematic‐mode LCD.     

Design and implementation of a vehicle interface protocol using an IEEE 1394 network

A wide variety of in-vehicle devices such as camera sensors, navigation systems, telematics and communication equipments have been incorporated into a vehicle to realize Intelligent Transport Systems (ITS) applications. Because an efficient standardized network is required, ITS Data Bus (IDB) has been discussed to carry high-speed multimedia data for audio, video and other real-time ITS applications. For connecting devices in a standardized manner, the IDB network has architecture with a gateway called vehicle interface which is located between automaker’s proprietary network and the standardized IDB network. IEEE 1394 (also known as iLink or FireWire), which can transport multimedia data for consumer electronics, is a good candidate for IDB network. In this paper, we analyze the issues for existing AV/C protocol (application layer protocol over IEEE 1394) to comprise the IDB network. In addition, we designed and implemented the vehicle interface protocol as a higher layer of IEEE 1394 to address the AV/C protocol issues for realizing the whole IDB network architecture.     

A study on a quantum-inspired evolutionary algorithm based on pair swap

A quantum-inspired evolutionary algorithm (QEA) is proposed as a stochastic algorithm to perform combinatorial optimization problems. The QEA is evolutionary computation that uses quantum bits and superposition states in quantum computation. Although the QEA is a coarse-grained parallel algorithm, it involves many parameters that must be adjusted manually. This paper proposes a new method, named pair swap, which exchanges each best solution information between two individuals instead of migration in the QEA. Experimental results show that our proposed method is a simpler algorithm and can find a high quality solution in the 0-1 knapsack problem. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

气体辅助法陶瓷薄膜的制备

Ceramics （alumina） coating on sevaral materials has been successfully achieved at room temperature by gas - assisted deposition （ GAD） technique. In the GAD process the alumina powder was accelerated by jet flow with velocity of - 1000 m/s and impaeted to a substrate, thereby a fiat and dense film was deposited up to 10 μm on the substrate without arty additional heating. The crystal structttre of the alumina in an obtained GAD films seemed as amorphous like. The crystalline phase was recovered by post nnnenling at 1 300 ℃ , however, the matrix resulted in a hollow structure.     

Novel screen technology for high‐contrast front‐projection display by controlling ambient‐light reflection

Abstract— One problem with front‐projection displays is that the screen contrast ratio decreases in bright ambient light. In this paper, we propose a new front‐projection display system that incorporates the control of reflection of ambient light in the screen design, providing a high contrast ratio even in a brightly lit room.     

Human-like natural behavior generation based on involuntary motions for humanoid robots

Human behaviors consist of both voluntary and involuntary motions. Almost all behaviors of task-oriented robots, however, consist solely of voluntary motions. Involuntary motions are important for generating natural motions like those of humans. Thus, we propose a natural behavior generation method for humanoid robots that is a hybrid generation between voluntary and involuntary motions. The key idea of our method is to control robots with a hybrid controller that combines the functions of a communication behavior controller and body balancing controllers. We also develop a wheeled inverted pendulum type of humanoid robot, named “Robovie-III”, in order to generate involuntary motions like oscillation. By applying our method to this robot and conducting preliminary experiments, we verify its validity. Experimental results show that the robot generates both voluntary and involuntary motions.     

Progress in viewing‐angle properties of liquid‐crystal displays

Abstract— Viewing‐angle dependences of the contrast ratio and color shift of LCDs have been radically improved as evidenced by the increasing application of LCDs in high‐quality television. This paper describes the concept of optical compensation and the fundamental characteristics of the viewing‐angle property for various LC modes.     

Syndiotactic‐specific radical polymerization of N‐isopropylacrylamide in toluene at low temperatures in the presence of silyl alcohols

The radical polymerization of N‐isopropylacrylamide was carried out in toluene at low temperatures in the presence of silyl alcohols, such as triethylsilanol. Poly(N‐isopropylacrylamide) with a racemo dyad content of 75% was obtained at ? 80 °C with a 4:1 triethylsilanol to monomer ratio loading. NMR analysis suggests that the mechanism for syndiotactic induction, in the presence of silyl alcohols, may be similar to that observed with alkyl alcohols. In this case, a 1:2 complex formation, via hydrogen bonding interactions, leads to the induction of syndiotactic specificity. Copyright © 2012 Society of Chemical Industry     

Evaluating the protective effects of radon inhalation or ascorbic acid treatment after transient global cerebral ischemic injury in gerbils

In this study, we compared the protective effects of radon inhalation and ascorbic acid administration on transient global cerebral ischemic injury in gerbils. Gerbils were treated with radon inhalation (2000 Bq/m³, 24 hours) or ascorbic acid (100, 300, or 500 mg/kg body weight). Then, transient global cerebral ischemia was induced by bilateral occlusion of the common carotid artery. Results showed that the number of damaged neurons was significantly increased in gerbils that underwent ischemia compared with that in control gerbils. However, the number of damaged neurons in gerbils treated with radon or 500 mg/kg of ascorbic acid before ischemia was significantly lower than gerbils who were subjected to ischemia without any pretreatment, and the protective effects of radon inhalation were similar to the effects of administering 500 mg/kg ascorbic acid. The levels of superoxide dismutase (SOD) and total glutathione (t-GSH) in brain tissue were increased to a similar extent by pretreatment with radon inhalation or 500 mg/kg of ascorbic acid. These findings suggested that radon inhalation has a protective antioxidative effect against transient global cerebral ischemic injury similar to 500 mg/kg ascorbic acid treatment.