Influence of the conditions of storage and cooking on growth,invasion and survival of Salmonella enteritidis in eggs

Basal studies for the confirmation of sanitary rules in the kitchen were performed, focusing on preventing an outbreak of food poisoning due to eggs contaminated with Salmonella Enteritidis (SE), using hen and quail eggs. SE did not grow at 5 degrees C but grew markedly at 25 degrees C in eggs. The invasion and growth of SE were marked under very humid conditions regardless of whether the eggshell was damaged. The invasion of SE into egg also occurred when eggs were taken in and out of the refrigerator. Moreover, SE was spread immediately to all non-contaminated eggs when SE-contaminated eggs were cracked into a bowl with non-contaminated eggs. In homemade mayonnaise containing 15% vinegar, sterilization took several hours to occur. On a stainless-steel bowl, SE survived for 2 weeks or more. These findings suggest that it is necessary to pay attention to secondary contamination.     

Dielectric properties of Permalloy granular composite materials

Dielectric and electrical properties of Permalloy granular composite materials have been studied considering the application to left-handed meta-materials. Surface oxidized Permalloy particles have high surface electrical resistance; the eddy current effect in the composite structure is suppressed. The electrical conductivity of compacted Permalloy particles increases with increasing temperature and indicates the semiconductive layer formation on the particle. The low frequency ac electrical conductivity of Permalloy composite materials shows a drastic increase in the particle content between 50 and 60 vol.%. Electrical permittivity spectra of Permalloy composites show a non-metallic characteristic and the enhancement of permittivity is observed with increase of Permalloy particle content.     

Toughening of cyanate ester resin by N‐phenylmaleimide–N‐(p‐hydroxy)phenyl‐maleimide–styrene terpolymers and their hybrid modifiers

N‐Phenylmaleimide–N‐(p‐hydroxy)phenylmaleimide–styrene terpolymer (HPMS), carrying reactive p‐hydroxyphenyl groups, was prepared and used to improve the toughness of cyanate ester resins. Hybrid modifiers composed of N‐phenylmaleimide–styrene copolymer (PMS) and HPMS were also examined for further improvement in toughness. Balanced properties of the modified resins were obtained by using the hybrid modifiers. The morphology of the modified resins depends on HPMS structure, molecular weight and content, and hybrid modifier compositions. The most effective modification of the cyanate ester resin was attained because of the co‐continuous phase structure of the modified resin. Inclusion of the modifier composed of 10 wt% PMS (M_w 136 000 g mol^?1) and 2.5 wt% HPMS (hydroxyphenyl unit 3 mol%, M_w 15 500 g mol^?1) led to 135% increase in the fracture toughness (K_IC) for the modified resin with a slight loss of flexural strength and retention of flexural modulus and glass transition temperature, compared with the values for the unmodified resin. Furthermore, the effect of the curing conditions on the mechanical and thermal properties of the modified resins was examined. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified cyanate ester resin system. © 2001 Society of Chemical Industry     

Lateral Inhomogeneity in the Electronic Structure of a Conjugated Poly(3‐hexylthiophene) Thin Film

How annealing influences the morphology of a highly regioregular poly(3‐hexylthiophene) (RR‐P3HT) film at the substrate interface as well as the lateral inhomogeneity in the electronic structure of the film are elucidated. Whereas previous studies have reported that high‐molecular‐weight (MW) RR‐P3HT films tend to show low crystallinity even after annealing, it is found that high‐MW RR‐P3HT does show high crystallinity after annealing at high temperature for a long time. Photoemission electron microscopy (PEEM), X‐ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy results clearly resolve a considerable lateral inhomogeneity in the morphology of RR‐P3HT film, which results in a variation of the electronic structure depending on the local crystallinity. The PEEM results show how annealing facilitates crystal growth in a high‐MW RR‐P3HT film.     

Study on environmental effect on fatigue and creep-fatigue strength of 316FR stainless steel in sodium at elevated temperature

Low-carbon 316 stainless steel with medium-nitrogen (316FR) is considered as the principal structural material for next generation fast breeder reactor (FBR) plants in Japan. The material strength standard and the creep-fatigue life evaluation method for 316FR have been developed. However, they are based on the results of material tests in air, while actual structural material will be used mainly in liquid sodium environment in the plants. In order to clarify the environmental effect, cyclic bending tests were carried out with and without hold time in sodium. Tested materials were 316FR and conventional 304 and 316 stainless steels. Weld metal of 316FR was also tested. As a result, it was found that fatigue and creep-fatigue lives of 316FR in sodium were larger than those in air and no explicit consideration of the environmental effect is necessary in design. It was also found that the life evaluation method based on the ductility exhaustion concept is applicable to creep-fatigue life assessment in sodium.     

Impact of fertilizer on a small watershed of Lake Biwa: use of sulfur and strontium isotopes in environmental diagnosis

Sulfur and strontium isotopes (delta(34)S and (87)Sr/(86)Sr) were determined in 39 river water samples collected over three different cultivation periods (April, May, and June), and in several materials used for comparison (fertilizers, detergents, soils, irrigation and agricultural waters), to evaluate the impact of fertilizers on a small agricultural watershed of Lake Biwa, in central Japan. delta(34)S values in river water decreased (from +5.8 to -2.0 per thousand) with increasing SO(4) concentrations (3.8 to 93.2 ppm) from upstream to downstream of the watershed. Comparison of river water S isotopes with those of possible source materials indicates that the enrichment of SO(4) can be attributed to the dissolution of two kinds of fertilizers: (1) compound fertilizers commonly used in this area and (2) ammonium sulfate which is applied on a small scale. In contrast, (87)Sr/(86)Sr values of river water decreased with time from April (avg. 0.71163), through May (avg. 0.71139), to June (avg. 0.71127). The tendency of the sample plots on the (87)Sr/(86)Sr vs. 1/Sr diagram suggests a time-dependent increase in the contribution of soil water to the river, which is partly affected by the Sr-bearing fertilizers. It is suggested that a maximum of 25% of dissolved Sr is derived from these fertilizers, while more than 75% of it is of rock origin. Mass balance calculations permitted us to evaluate the proportion of fertilizer contribution in each river. Combined use of S and Sr isotopes together with concentration data could be a new environmental diagnosis technique for rivers and soils in localized watersheds.     

Physicochemical characteristics of rapidly dried onion powder and its anti-atherogenic effect on rats fed high-fat diet

Rapidly dried onion (Allium cepa L. cv. Momiji No. 3) powder (OP) prepared from the outer layers (from second to fourth scale leaves from the surface) of onion bulbs was analysed for its quercetin and polyuronide contents, the effects of enzymatic treatment and the anti-atherogenic effect on rats fed a high-fat diet. Quercetin 4′-glucoside (50%), free quercetin (30%) and quercetin 3,4′-diglucoside (20%) were identified as quercetin derivatives, and boiling-water extraction was effective in extracting these compounds. OP contained 12.9% of polyuronides, the basic skeleton of pectin. Enzymatic degradation (cellulase and pectinase, 50 °C for 12 h, pH 6.0) of OP was effective in obtaining a slurry of smaller particle sizes. The free quercetin increased and the glucosides decreased with enzyme treatment. In Wistar rats fed an OP-added high-fat diet, the total cholesterol, HDL-cholesterol and triglyceride concentrations were not significantly different from the rats fed a high-fat diet without OP. However, the atherogenic index (AI) of Wistar rats fed an OP-added high-fat diet was lower (AI = 3.3) than rats fed the diet without OP (AI = 4.1). The incremental elastic modulus (IEM) of the aorta from rats fed the OP-added diet was also significantly lower than that of the rats fed the diet without OP. The AI and IEM values of the rats fed the OP-added diet were quite similar to the values of rats fed the diet without OP but were allowed spontaneous exercise. These results suggest that OP intake is effective for decreasing the risk of arteriosclerosis.     

Three-dimensional shape recognition method using ultrasonics for manipulator control system

This article describes a three-dimensional shape recognition method that employs an ultrasonic distance sensor mounted on a manipulator, and its application to a manipulator control system. The principle of the method is to reconstruct an object surface numerically using both distance and orientation informations of an object. The method makes it possible to control the manipulator, to set the sensor in any position and orientation employing freedom of the manipulator, and to measure the object. The method is available for manipulator control because it can precisely assess the distance from the manipulator to the object, as well as reconstruct the object shape. Experimental results show that the newly developed method make object shape recognition easy and inexpensive. Application experiment proved that the method is effective for manipulator work due to its provision of distance information.     

Self-Assembling Properties and Recovery Effects on Damaged Skin Cells of Chemically Synthesized Mannosylerythritol Lipids

Mannosylerythritol lipids (MELs), which are one of the representative sugar-based biosurfactants (BSs) produced by microorganisms, have attracted much attention in various fields in the sustainable development goals (SDGs) era. However, they are inseparable mixtures with respect to the chain length of the fatty acids. In this study, self-assembling properties and structure-activity relationship (SAR) studies of recovery effects on damaged skin cells using chemically synthesized MELs were investigated. It was revealed, for the first time, that synthetic and homogeneous MELs exhibited significant self-assembling properties to form droplets or giant vesicles. In addition, a small difference in the length of the fatty acid chains of the MELs significantly affected their recovery effects on the damaged skin cells. MELs with medium or longer length alkyl chains exhibited much higher recovery effects than that of C18-ceramide NP.