Resistance Degradation in Y(Cr,Mn)O3–Y2O3 Composite NTC Ceramics in Hostile Environments

A series of composite, negative temperature coefficient (NTC) ceramics were carefully processed with compositions based on the Y(Cr,Mn)O₃+Y₂O₃ system and these were investigated for resistance stability in hostile environments. This specific system is of interest for high-temperature automobile thermistors, however either through the processing or in use of these, materials can be exposed to reducing atmospheres at temperatures around 900°–1000°C. The thermochemical processes at intermediate temperatures and low     <10⁻¹⁰atm can influence the resistance of the given ceramics. Through an impedance analysis it is determined that the resistance increase is associated primarily with a grain boundary resistance increase. The grain and grain boundary elements are modeled through parallel constant phase element and resistance equivalent circuits connected in series. Possible origins of the defect chemistry being controlled through high-temperature processes at the sintering are partial Schottky reactions that are compensated through a superoxidation reaction on cooling and aging. The reduction process reversed the superoxidation reaction and transited the grain boundary surfaces to ionically compensated B-site vacancies with oxygen vacancies.     

Transmission Electron Microscopy Characterization of Hot-Pressed ZrB2 with MoSi2 Additive

Microstructure of the hot-pressed ZrB₂ with MoSi₂ additive was investigated by transmission electron microscopy (TEM). The effect of MoSi₂ addition on the microstructure of the ceramic was assessed. For the pure ZrB₂, the microstructure consisted of the equiaxed ZrB₂ grains and a few elongated ZrB₂ grains. For the ZrB₂ with MoSi₂ additive, the microstructure consisted almost entirely of equiaxed ZrB₂ grains. A few dislocations were present in the ZrB₂ grains. In addition, high-resolution TEM observations showed that the intergranular amorphous phase was absent at two ZrB₂ grain boundaries in the ZrB₂ with MoSi₂ additive.     

Micro machining for control of wettability with surface topography

A micro fabrication is presented to manufacture hydrophobic surfaces with micro-scale structures. Hydrophobicity is controlled with the shape and the alignment of micro pillars in the structure. The structures are manufactured in large areas at high production rates in the following processes: (1) the structure is fabricated on a tool by focused ion beam sputtering; (2) the reverse structure is formed on a metal plate by incremental stamping using the structured tool; and (3) the structure is transferred onto plastic plates by molding. A consecutive stamping is also proposed to fabricate several structures on a surface accurately with a structured tool, in which the moving pitch of the structured tool is numerically controlled. The effect of the surface topography on hydrophobicity is discussed with measuring contact angles on the structured surfaces in the water droplet tests. Hydrophobicity on the plastic plate is associated with the solid fraction on the structured surface based on the Cassie–Baxter model. A larger contact angle is observed for a smaller solid fraction of the surface.     

In situ X-ray diffraction of surface oxide on type 430 stainless steel in breakaway condition using synchrotron radiation

Changes in the crystal structure of type 430 stainless steel and the oxides on its surface were studied in situ at 1373 K using a high-intensity synchrotron X-ray source provided by SPring-8 in Japan. The surface of the steel was initially covered with Cr₂O₃, which was then converted to FeCr₂O₄, and finally Fe₃O₄ and Fe₂O₃ formed on it. These results indicated that the reason for the breakaway oxidation in type 430 stainless steel is Cr depletion beneath Cr₂O₃ layer and the subsequent ionisation of Fe, not the simple mechanical failure of Cr₂O₃.     

Genotoxicity of nano/microparticles in in vitro micronuclei, in vivo comet and mutation assay systems

Background

Recently, manufactured nano/microparticles such as fullerenes (C₆₀), carbon black (CB) and ceramic fiber are being widely used because of their desirable properties in industrial, medical and cosmetic fields. However, there are few data on these particles in mammalian mutagenesis and carcinogenesis. To examine genotoxic effects by C₆₀, CB and kaolin, an in vitro micronuclei (MN) test was conducted with human lung cancer cell line, A549 cells. In addition, DNA damage and mutations were analyzed by in vivo assay systems using male C57BL/6J or gpt delta transgenic mice which were intratracheally instilled with single or multiple doses of 0.2 mg per animal of particles.

Results

In in vitro genotoxic analysis, increased MN frequencies were observed in A549 cells treated with C₆₀, CB and kaolin in a dose-dependent manner. These three nano/microparticles also induced DNA damage in the lungs of C57BL/6J mice measured by comet assay. Moreover, single or multiple instillations of C₆₀ and kaolin, increased either or both of gpt and Spi^- mutant frequencies in the lungs of gpt delta transgenic mice. Mutation spectra analysis showed transversions were predominant, and more than 60% of the base substitutions occurred at G:C base pairs in the gpt genes. The G:C to C:G transversion was commonly increased by these particle instillations.

Conclusion

Manufactured nano/microparticles, CB, C₆₀ and kaolin, were shown to be genotoxic in in vitro and in vivo assay systems.     

Potato and soy peptides alter caecal fermentation and reduce serum non‐HDL cholesterol in rats fed cholesterol

We examined the effect of potato peptides (PPC) in rats fed a cholesterol‐enriched diet, in comparison with two cholesterol‐enriched diets containing soy peptides (SPC) or casein (CNC), and a cholesterol‐free diet containing casein (CN) for 4 weeks. The serum non‐high‐density lipoprotein (HDL) cholesterol level was lower in the PPC‐ (–18.39%) and SPC‐fed (–32.76%) groups (p <0.05) than in the CNC‐fed group at the end of the feeding period. The low‐density lipoprotein receptor mRNA level in the PPC‐fed group, and cholesterol 7α‐hydroxylase and scavenger receptor class B type 1 mRNA levels in the SPC‐fed group, were higher (p <0.05) than in the CN‐ and CNC‐fed groups. Faecal neutral sterol and caecal short‐chain fatty acid concentrations in the PPC‐ and SPC‐fed groups were higher (p <0.05) than in the CN‐ and CNC‐fed groups. The faecal total acidic sterol concentration was higher in the SPC‐fed group than in the CN‐ and PPC‐fed groups. Caecal anaerobe and Bifidobacterium populations were higher (p <0.05) in the PPC‐ and SPC‐fed groups than in the CN‐fed group. This study suggests that potato peptides, as soy peptides, alter caecal fermentation and steroid absorption and reduce the serum non‐HDL cholesterol level in rats fed cholesterol.     

Development of anchored oligothiophenes on substrates for the application to the tunable transparent conductive films

Bis(triethoxysilyl)-substituted oligothiophene with a moderate π-conjugation length was newly synthesized and polymerized to give a polysilsesquioxane network having oligothiophene units dispersed homogeneously without phase separation. The polymer was fixed on glass or ITO substrate by spin-coating and annealing. The resulting film exhibited a high mechanical strength due to the covalent bonding with the substrates, and was electrochemically stable even after 300 redox cycles in electrolyte solution. Chemical oxidation of the polymer films yielded electrically conductive and almost transparent films.     

Ethylene vinyl acetate/layered silicate nanocomposites prepared by a surfactant-free method: Enhanced flame retardant and mechanical properties

Exfoliated EVA/layered silicate nanocomposites were prepared by a masterbatch process using polymer-modified layered silicate instead of small molecule surfactant-modified clays. The nanocomposites exhibited improved mechanical properties and flame retardancy. Microscale flammability test showed that the heat release capacity (HRC) and total heat release (THR) were reduced by 21-24% and 16%, respectively. Radiant gasification studies revealed that the exfoliated EVA nanocomposites exhibited better improvements in flame retardant properties of EVA than did the corresponding intercalated nanocomposites. The peak mass loss rate of the exfoliated EVA nanocomposite containing about 5 wt% clay was reduced by 80% and the mass loss rate plot was spread over a much longer period of time. The mechanical and flammability tests revealed that the observed improvements in all the desirable properties were due to the presence of both the incorporated polymeric surfactant and the nanoclay.