Stress intensity factors of microstructurally small crack

The stress intensity factor (SIF) is widely used for evaluating integrity of cracked components. Averaging the anisotropy of each crystal, the macroscopic behavior of polycrystalline materials is isotropic and homogenous in terms of elastic deformation. However, the anisotropic and/or inhomogeneous property influences on the stress field around a crack if the crack size is small in comparison with the grain. Thus, the SIF of the microstructurally small crack may differ from that in the isotropic body. In present study, the effect of anisotropic/inhomogeneous elasticity on the SIF is investigated by using the finite element analysis (FEA). At first, the SIFs of semi-circular crack in a single crystal and a polycrystalline material are calculated. These reveal that the magnitude of SIF is dependent not only on the crystal orientation but also on the deformation constraint by the neighboring crystals. Then, the statistical scatter of SIF due to the random orientation of crystal orientation in a polycrystal is examined by a Monte Carlo simulation.     

Atomic force microscopic study on DNA-wrapping for different diameter single-wall carbon nanotubes

DNA-wrapped single-wall carbon nanotubes (DNA-SWNT hybrids) prepared from different diameter HiPco- and Arc-SWNTs were investigated by atomic force microscopy. The mean diameter of DNA-HiPco-SWNT hybrids is 1.94 nm that is consistent with one HiPco-SWNT (~ 0.9 nm) wrapped by DNA (~ 1 nm). On the other hand, the mean diameter of DNA-Arc-SWNT hybrids is 3.74 nm that can correspond to one Arc-SWNT (~ 1.4 nm) wrapped by several layers of DNA. It is suggested that the DNA-wrapping mechanism for large diameter Arc-SWNTs is different from that for small diameter HiPco-SWNTs.     

Disaccharide analysis of human skin glycosaminoglycans in sun-exposed and sun-protected skin of aged people

The negative conduction effect of quinidine on each of the successive phases of the ventricular depolarization was investigated using an original noninvasive method: the spatial velocity electrocardiogram of the QRS complex (SVECG-QRS). We performed a randomized placebo-controlled trial in 10 healthy subjects with a single oral dose of quinidine (330 mg) or placebo. Electrocardiographic acquisition and processing (220 recordings for the complete trial) were performed using the Lyon vectorcardiographic program. For each SVECG-QRS curve, the position of seven specific points from A (onset of QRS) to G (end of QRS) were determined precisely. The six successive time intervals between these points (AB-FG) and five velocity values (B-F) were then calculated. The QRS complex was longer under quinidine than placebo (102.4 +/- 1.6 vs. 100.3 +/- 1.5 ms). The difference was at the periphery of statistical significance (p = 0.05), and this lack of statistical difference may be mainly due to the low serum levels of quinidine obtained at the peak of the concentration (1.46 +/- 0.4 mg/1). All six QRS time intervals were longer under quinidine, but only the BC interval was significantly different (9.3 +/- 1.1 vs. 18.8 +/- 1.1 ms; p < 0.05) suggesting a more pronounced negative conduction effect at the onset of ventricular depolarization. No significant modifications were observed for the velocity values. We conclude that (1) the negative conduction effect of quinidine is heterogeneous, but a further study with a higher dose of quinidine (concentration-dependent effect) is required to confirm this hypothesis and (2) the spatial velocity electrocardiogram of the QRS complex allows a detailed analysis of the ventricular conduction phases. The results of the measurement were found to be reproducible. This noninvasive tool could be used in clinical practice to assess effects of antiarrhythmic drugs on successive ventricular depolarization phases.     

Identification of Eucalyptus citriodora clones micropropagated in tissue culture

The extent of genetic identity observed in the young individuals which were micropropagated from a single Eucalyptus individual was analyzed by using DNA-fingerprinting. Among 40,000 tissue-cultured-seedings of E.citriodora, 200 plants were randomly chosen so that each total DNA might be extracted from their leaves. Using these DNAs as template, PCR was performed with some primers we found in advance that leads polymorphism for DNA of E. citriodora. In this study, all over the 200 cases, the band pattern formed cDNA fragment on a gel after electrophoresis was the identical one mutually.     

The propeptide of subtilisin BPN'' as a temporary inhibitor and effect of an amino acid replacement on its inhibitory activity

PURPOSE: To determine the potential benefits of applying laparoscopic techniques for the intraabdominal insertion of aortofemoral grafts and to compare results with those of conventional surgery. METHODS: Having previously demonstrated the feasibility of a totally laparoscopic aortofemoral bypass technique using carbon dioxide peritoneal insufflation in a porcine model, we now report our first human experience with this laparoscopic technique in a 49-year-old man. RESULTS: The patient's postoperative course was marked by his minimal requirements for analgesia, early ambulation, and discharge from the hospital in the morning of the third postoperative day. CONCLUSIONS: The benefits of a laparoscopic approach to aortobifemoral bypass grafting in terms of financial savings and earlier rehabilitation in this patient was significant. This less-invasive procedure warrants further investigation.     

Reduced order model predictive control for constrained discrete‐time linear systems

A reduced order model predictive control (MPC) is discussed for constrained discrete‐time linear systems. By employing a decomposition method for finite‐horizon linear systems, an MPC law is obtained from a reduced order optimization problem. The decomposition enables us to construct pairs of initial state and control sequence which have large influence on system responses, and it also characterizes the standard LQ control. The MPC law is obtained based on a combination of the LQ control and dominant input sequences over the prediction horizon. The proposed MPC method is illustrated with numerical examples. Copyright © 2011 John Wiley & Sons, Ltd.     

Development of a dual‐lamp projector with higher brightness

Stationary projectors mainly used in system applications have recently gained a wider application range, including general presentations in halls and large conference rooms and being used, for example, in digital signage and for monitoring purposes. Consequently, they are required to meet new market demands for durability, reliability, and flexibility in installation in addition to their conventional basic performance such as especially high brightness. To achieve especially high brightness, a new optical system with two lamps is proposed; the profile of the cover glass that prevents the glass from scattering is made aspherical, the profile of the beam‐combining mirror is improved with its position optimized, and the size of the incident plane of the integrator rod is made larger (1.1 times). These measures resulted in an optical system of an even higher efficiency with 7000 lm, which is the highest in its class (according to a June 2010 investigation). Also, the arrangement of two parallel lamps completely eliminated the effect of heat passing from one lamp to the other, which helped secure durability, reliability, and flexibility in installation. Furthermore, the combined use of the unique non‐telecentric optical system, adopted from the conventional single‐lamp model, helps maintain the class‐highest contrast ratio.^1,2     

Taxonomy for protective ability of rust layer using its composition formed on weathering steel bridge

For a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge, the relationship between the corrosion rate of the bridge and the composition of the rust layers formed on the girders was first investigated. These corrosion rates were clearly classified by the protective ability index (PAI) of α/γ^∗ and (β + s)/γ^∗, where α, γ^∗, β and s are the mass ratio of crystalline α-FeOOH, the total of γ-FeOOH, β-FeOOH and the spinel-type iron oxide (mainly Fe₃O₄), β-FeOOH and spinel-type iron oxide, analyzed by XRD, respectively. The inequality of the former index α/γ^∗ > 1 expressed the protectiveness criterion of the rust layer, while that of the latter index, (β + s)/γ^∗< 0.5 or > 0.5, classified the corrosion rate of the non-protective rust layer. The PAI is useful for a quantitative evaluation of the protectiveness of a rust layer formed on a weathering steel bridge and is an important item for the corrosion assessment of the bridge.