Lithium Phenolate Complexes with a Pyridine‐Containing Polymer for Solution‐Processable Electron Injection Layers in PLEDs

A series of (vinylphenyl)pyridine‐based polymer binders, PVPh2Py, PVPh3Py, and PVPh4Py, are designed and synthesized and it is found that mixtures of Liq and the polymers exhibit superior electron injection characteristics as ultrathin (1.6 nm) electron injection layer (EIL) films. They are comparable to those of EILs composed only of Liq. The addition of the polymers does not deteriorate the performance of Liq EILs. Additionally, when the EIL thickness is increased from 1.6 nm to 16 nm, the driving voltages increase and the external quantum efficiencies decrease. The increase in the voltage and decrease in the EQE are suppressed in the device with mixed EILs compared to those observed for the device composed of 100 wt% Liq. Furthermore, the position of the nitrogen in the pyridine ring is considered to influence the electron transport properties of the EILs. The mixing PVPh4Py with Liq improves the driving voltage of the fabricated devices, even with a thick mixed EIL. This reduced dependence of the performance of EILs on their thickness will be advantageous for the coating of large areas using solution processes.     

Development of Millimeter Wave Fabry-Pérot Resonator for Simultaneous Electron-Spin and Nuclear Magnetic Resonance Measurement

We report a Fabry-Pérot resonator with spherical and flat mirrors to allow simultaneous electron-spin resonance (ESR) and nuclear magnetic resonance (NMR) measurements that could be used for double magnetic resonance (DoMR). In order to perform simultaneous ESR and NMR measurements, the flat mirror must reflect millimeter wavelength electromagnetic waves and the resonator must have a high Q value (Q?>?3000) for ESR frequencies, while the mirror must simultaneously let NMR frequencies pass through. This requirement can be achieved by exploiting the difference of skin depth for the two frequencies, since skin depth is inversely proportional to the square root of the frequency. In consideration of the skin depth, the optimum conditions for conducting ESR and NMR using a gold thin film are explored by examining the relation between the Q value and the film thickness. A flat mirror with a gold thin film was fabricated by sputtering gold on an epoxy plate. We also installed a Helmholtz radio frequency coil for NMR and tested the system both at room and low temperatures with an optimally thick gold film. As a result, signals were obtained at 0.18 K for ESR and at 1.3 K for NMR. A flat-mirrored resonator with a thin gold film surface is an effective way to locate NMR coils closer to the sample being examined with DoMR.     

Adaptive Fault Diagnosis of Analog Circuits by Operation-Region Model and X–Y Zoning Method

We have proposed a method for diagnosing analog circuits that is realized by combining the operation-region model and the X–Y zoning method. In the method, we could implement a diagnosis procedure based on a diagnostic method for digital circuits because we developed a data processing method to handle data discretely. In this paper, we improve the method by using an adaptive test to obtain a shorter diagnostic sequence length and show its characteristics. Moreover, we propose a new data processing method that utilizes the output response of a circuit to obtain better diagnostic performance. We demonstrate the effectiveness of the proposed methods by applying them to ITC’97 benchmark circuits with hard faults and soft faults. These improved methods can reduce the diagnostic sequence length without degrading the performance of diagnostic resolution and CPU time.     

Development of a Millimeter-Wave Electron-Spin-Resonance Measurement System for Ultralow Temperatures and Its Application to Measurements of Copper Pyrazine Dinitrate

We have developed a millimeter-wave electron-spin-resonance (ESR) measurement system using a ³He-⁴He dilution refrigerator for the ultralow-temperature range below 1 K. The currently available frequency range is 125–130 GHz. This system is based on a Fabry-Pérot-type resonator (FPR) that is composed of two mirrors. The frequency can be changed by adjusting the distance between the mirrors using a piezoelectric actuator installed at the bottom of the resonator. A homodyne detection system with an InSb detector is built into the low-temperature section of the ³He-⁴He dilution refrigerator; this system provides high sensitivity. Using this system, we performed ESR measurements on a Heisenberg quantum-spin chain—copper pyrazine dinitrate, Cu(C₄H₄N₂)(NO₃)₂—over the temperature range from 6.6 down to 0.25 K. The ESR lines change continuously with decreasing temperature. Our results suggest that the ESR spectrum of copper pyrazine dinitrate may be useful as a temperature sensor for the very low-temperature range.     

Spectroscopic and Photoluminescent Properties of Indium Zinc Oxide (IZO) and IZO/Ag/IZO Sandwiched Film

We report the ellipsometric and photoluminescence (PL) properties of Indium zinc oxide (IZO) films, which were grown by radio frequency sputtering under Ar and O₂ atmospheres. IZO films grown under an O₂ atmosphere (IZO (O₂)) showed enhanced PL properties when compared to the films grown under an Ar atmosphere (IZO (Ar)), particularly with respect to the band-edge emission. The enhancement of band-edge emission can be attributed to the reduction in the non-emissive defect states related to oxygen vacancies, which were repaired by sputtering under O₂ atmosphere, whereas the PL enhancement in green region is probably due to the formation of the different types of defects under the excess oxygen environment. This was also supported by the results of time-resolved PL measurements, where the band-edge emission of IZO (Ar) showed rapid decay with a 50 ps lifetime, which indicates the dominance of the relaxation pathway to underlying defect states. In contrast, the PL decay profiles of IZO (O₂) for band-edge and emissive defect states showed moderate decay with time-constants of 2.3 ns and 5.7 ns, respectively. The exciton relaxation dynamics were sensitive to the presence and its kinds of defect states, which were controlled by the growth conditions.     

An AlxGa1-xSb avalanche photodiode with again bandwidth product of 90 GHz

An Al_xGa_1-xSb avalanche photodiode (APD) with an Al composition of 0.05 has been fabricated and tested. The measured gain-bandwidth (GB) product of the highly doped diode is 90 GHz. Such a large GB product has never been previously achieved by any APD materials sensitive in the long-wavelength region. This suggests the advantage of the Al_xGa_1-xSb material system for very high-speed operation     

Development of an active targeting liposome encapsulated with high-density colloidal gold for transmission electron microscopy

Active targeting of the liposome is an attractive strategy for drug delivery and in vivo bio-imaging. We previously reported the specific accumulation of Sialyl Lewis X (SLX) liposome to inflamed tissue in arthritic model mice or tumor-bearing mice. SLX-liposome encapsulation with fluorescent substances allows for the visualization of these liposomes by the time-dependent transvascular accumulation of fluorescent signals in the histological sections. In the present study, we developed a new SLX-liposome encapsulated with colloidal gold for transmission electron microscopic observation. We herein describe the characterization of the colloidal gold-loaded SLX-liposomes and demonstrate its specific targeting to the endothelial cells of tumor blood vessels in tumor-bearing mice.     

Oxygen doped Ge crystals Czochralski-grown from the B2O3-fully-covered melt

Local vibrations of oxygen in Ge crystals grown from a melt fully covered by B₂O₃ were evaluated by Fourier-transform infrared spectroscopy. Ge single crystals containing oxygen were grown by the Czochralski method under various growth conditions. Oxygen concentrations in the crystals were determined to be in the range between 8.5 × 10¹⁵ and 5.5 × 10¹⁷ cm⁻³ from the infrared absorption at 855 cm⁻¹ originating in local vibration of Ge-O_i-Ge quasi-molecules. Absorption peaks relating to GeO_x, SiO_x and Si-O_i-Si were not detected in the as-grown crystals. The calibration coefficient for determining oxygen concentration in Ge crystals from the absorption peak intensity at 1264 cm⁻¹ was estimated to be 1.15 × 10¹⁹ cm⁻².     

Energy‐Dissipative Matrices Enable Synergistic Toughening in Fiber Reinforced Soft Composites

Tough hydrogels have shown strong potential as structural biomaterials. These hydrogels alone, however, possess limited mechanical properties (such as low modulus) when compared to some load‐bearing tissues, e.g., ligaments and tendons. Developing both strong and tough soft materials is still a challenge. To overcome this obstacle, a new material design strategy has been recently introduced by combining tough hydrogels with woven fiber fabric to create fiber reinforced soft composites (FRSCs). The new FRSCs exhibit extremely high toughness and tensile properties, far superior to those of the neat components, indicating a synergistic effect. Here, focus is on understanding the role of energy dissipation of the soft matrix in the synergistic toughening of FRSCs. By selecting a range of soft matrix materials, from tough hydrogels to weak hydrogels and even a commercially available elastomer, the toughness of the matrix is determined to play a critical role in achieving extremely tough FRSCs. This work provides a good guide toward the universal design of soft composites with extraordinary fracture resistance capacity.     

Quantum Transport and Cyclotron Resonance Study of Ge/SiGe Quantum Wells in High Magnetic Fields

Shubnikov-de Haas oscillation and cyclotron resonance were studied for high mobility p-type Ge channels in strained Ge/Si_1?x Ge _x quantum wells, using pulsed high magnetic fields up to 50 T. Fine quantum oscillations were observed in ρ _xx . Reflecting the complex Landau level structure in the nearly degenerate valence bands, the Fourier transform of the oscillatory spectra consists of several peaks. Cyclotron resonance was measured at photon energies between 10 and 17 meV. Two well-defined resonance peaks were observed in two samples with different x, resulting in different strains. A large non-parabolicity and large strain dependence of the effective masses were observed.