The recovery and recrystallization of cold rolled V-W-Ti alloys

Several V-W-Ti alloys with about 50% reduction in thickness by cold rolling were isochronally annealed at temperatures from 100 to 1100 °C. Hardness was measured after the annealing. By comparison with V4Cr4Ti and V4Ti alloys, the V6WTi alloy was found to begin recovery at a temperature about 100 °C higher, while the full recrystallization temperature was around 900 °C for all of the alloys. Hardness decreased successively above 500 °C in V8W, as is the case in pure V. Impurity induced hardening was observed around 300 °C only in the alloys without Ti. Precipitation and the interaction between interstitial impurities and dislocations were supposed to be the main contributors to the different recovery and recrystallization behaviors of the alloys.     

Charge behavior in flowing oil in oil/ pressboard insulation system by electro-optic field measurement

The electrical insulation structure of most power transformers is a combination of insulating oil and solid materials. One of the crucial problems we face in transformer operation is flow electrification, which occurs at a flowing oil/solid material interface. Thus, for the transformer insulation design, we need to clarify the now electrification phenomena. In this paper, we measured the electric field strength in an oil/pressboard composite insulation system using an electro-optic method of the Kerr effect. We obtained the time variation of electric field distribution in both flowing uncharged and charged oil. It is notable that we could quantitatively clarify the electric field distortion in flowing charged oil by flow electrification. Furthermore, we measured the leakage current from divided electrodes and derived a charge density distribution along the flow direction. Finally, we quantitatively discussed the electric field distribution and the charge behavior from the measurement results.     

High-efficiency photon-number detection for quantum information processing

The visible light photon counter (VLPC) features high quantum efficiency (QE) and low pulse height dispersion. These properties make it ideal for efficient photon-number state detection. The ability to perform efficient photon-number state detection is important in many quantum information processing applications, including recent proposals for performing quantum computation with linear optical elements. In this paper, we investigate the unique capabilities of the VLPC. The efficiency of the detector and cryogenic system is measured at 543 nm wavelengths to be 85%. A picosecond pulsed laser is then used to excite the detector with pulses having average photon numbers ranging from 3-5. The output of the VLPC is used to discriminate photon numbers in a pulse. The error probability for number state discrimination is an increasing function of the number of photons, due to buildup of multiplication noise. This puts an ultimate limit on the ability of the VLPC to do number state detection. For many applications, it is sufficient to discriminate between 1 and more than one detected photon. The VLPC can do this with 99% accuracy.     

Change of fuel-to-cladding gap width with the burn-up in FBR MOX fuel irradiated to high burn-up

In order to study the dependence of the gap width change on the burn-up, the fuel-to-cladding gap widths were investigated by ceramography in a large number of FBR MOX fuel pins irradiated to high burn-up. The dependence of gap widths on the burn-up was closely connected with the formations of JOG (joint oxyde-gaine) and rim structure. The gap widths decreased gradually due to the fuel swelling until ∼30 GWd/t, but beyond this burn-up the dependence showed two different tendencies. With the increase of burn-up, the gap widths decreased due to the increase of fuel swelling in the low fuel temperature region where the rim structure was observed, but they increased in the high fuel temperature region where the JOG rich in Cs and Mo formed in the gap.     

Preparation and Property of Acrylic Acid Rare Earth Complex and Its Hydrosilylation

Acrylic acid rare earth complex was prepared. Its chemical composition was determined by chemical and elemental analysis, and its structure as well as properties was characterized using IR, Fluorescence and UV spectrum, and its solubility was also investigated. Meanwhile a kind of elastic functional polymer with rare earth units in the side chains was produced. It is confirmed by IR spectrum that the Si-H bonds really react with acrylic acid rare earth.     

Fabrication of alumina films with laminated structures by ac anodization

Anodization techniques by alternating current (ac) are introduced in this review. By using ac anodization, laminated alumina films are fabricated. Different types of alumina films consisting of 50–200 nm layers were obtained by varying both the ac power supply and the electrolyte. The total film thickness increased with an increase in the total charge transferred. The thickness of the individual layers increased with the ac voltage; however, the anodization time had little effect on the film thickness. The laminated alumina films resembled the nacre structure of shells, and the different morphologies exhibited by bivalves and spiral shells could be replicated by controlling the rate of increase of the applied potentials.     

Shape and motion from image streams under orthography: a factorization method

Inferring scene geometry and camera motion from a stream of images is possible in principle, but is an ill-conditioned problem when the objects are distant with respect to their size. We have developed a factorization method that can overcome this difficulty by recovering shape and motion under orthography without computing depth as an intermediate step.An image stream can be represented by the 2F×P measurement matrix of the image coordinates of P points tracked through F frames. We show that under orthographic projection this matrix is of rank 3.Based on this observation, the factorization method uses the singular-value decomposition technique to factor the measurement matrix into two matrices which represent object shape and camera rotation respectively. Two of the three translation components are computed in a preprocessing stage. The method can also handle and obtain a full solution from a partially filled-in measurement matrix that may result from occlusions or tracking failures.The method gives accurate results, and does not introduce smoothing in either shape or motion. We demonstrate this with a series of experiments on laboratory and outdoor image streams, with and without occlusions.     

Analysis of license inconsistency in large collections of open source projects

Free and open source software (FOSS) plays an important role in source code reuse practice. They usually come with one or more software licenses written in the header part of source files, stating the requirements and conditions which should be followed when been reused. Removing or modifying the license statement by re-distributors will result in the inconsistency of license with its ancestor, and may potentially cause license infringement. In this paper, we describe and categorize different types of license inconsistencies and propose a method to detect them. Then we applied this method to Debian 7.5 and a collection of 10,514 Java projects on GitHub and present the license inconsistency cases found in these systems. With a manual analysis, we summarized various reasons behind these license inconsistency cases, some of which imply potential license infringement and require attention from the developers. This analysis also exposes the difficulty to discover license infringements, highlighting the usefulness of finding and maintaining source code provenance.     

Complexes of Starch and its Related Materials with Organic Compounds. Part VIII. Measurement of the Heats of Complex Formation of Cyclodextrins in Aqueous Solutions by Microcalorimeter

Calorimetric studies have been made on the complex formation of cyclodextrins with triiodide ion or p-nitrophenolate anion in aqueous solutions by using microcalorimeter. The heats of complex formation of α-, β-, and γ-dextrin, respectively with both the guest compounds were obtained and marked differences in magnitude of the reaction heats were observed for the three dextrins. The association process of the dextrins with the guest compounds in aqueous solutions was briefly discussed with respect to the points of stoichiometry and thermodynamics.     

Decentralized PD control for non-uniform motion of a Hamiltonian hybrid system

In this paper, a decentralized proportional-derivative （PD） controller design for non-uniform motion of a Hamiltonian hybrid system is considered. A Hamiltonian hybrid system with the capability of producing a non-uniform motion is developed. The structural properties of the system are investigated by means of the theory of Hamiltonian systems. A relationship between the parameters of the system and the parameters of the proposed decentralized PD controller is shown to ensure local stability and tracking performance. Simulation results are included to show the obtained non-uniform motion.