The principle and fundamental characteristics of brushless three-phase synchronous induction motor with two stators

Brushless three-phase synchronous motor involving a rotating ac exciter on the same shaft as the motor and with the windings linked through a shaft-mounted rectifier is widely used as medium and large capacity machines. However, the motor needs to fit with damping windings for self-starting outside of the field winding in the rotor and needs to equip discharge resistance with complex electronic device to dispose of electromagnetic force induced in the field winding at starting. Therefore, the rotor structure is very complex, and there are disadvantages, especially for the robust and highly reliable motor that is desired. To solve the problem found in traditional motors, the authors proposed a brushless three-phase synchronous induction motor with two stators and one wound rotor. This problem is solved because the proposed motor is of two-stators structure: the rotor winding operates as a secondary winding of induction motor at starting and as the field winding at synchronous operation. The motor can self-start as a wound-rotor induction motor without external secondary resistance. Therefore, discharge resistance is not necessary; the starting equipment is very simple and the rotor structure is robust. It is possible to start with high torque. In this paper, the basic constitution of the proposed motor and the principles of operation are described in detail. The experimental results at starting and pulling into synchronism are shown for confirming the principles of operation and the experimental and numerical results of the starting characteristics. The load ones and the generating ones are shown and then the practical use of the proposed motor is confirmed.     

Utilization of a direct sandwich ELISA kit for rapid diagnosis of adenovirus hemorrhagic cystitis in a patient with adult T-cell leukemia

We report on a case of adenovirus hemorrhagi cystitis that developed in a 49-year-old woman during intensive chemotherapy for adult T-cell leukemia. Although rapid etiologic diagnosis is essential for the effective management of viral hemorrhagic cystitis, the isolation of adenovirus from urine is often too time-cousuming. We detected the adenovirus antigen in the patient's urine using an Adenoclone direct sandwich ELISA kit (Cambridge Bio Science), which is commonly employed for the diagnosis of adenovirus conjunctivitis. Treatment consisted of intravenous vidarabine and bladder irrigation, which resulted in prompt clinical improvement. The Adenoclone kit was useful for the rapid etiologic diagnosis of adenovirus hemmorrhagic cystitis.     

A broadband power meter calibration system in the frequency rangefrom 10 MHz to 40 GHz using a coaxial calorimeter

A broadband power meter calibration system based on a newly constructed coaxial calorimeter has been developed in the frequency region 10 MHz-40 GHz. The RF power is measured as the difference of DC power supplied to the calorimeter built-in heater in the RF load, when RF is turned off and on, holding an isothermal control between the RF load and a temperature reference. To minimize the error due to the adiabatic coaxial waveguide, we devised a new method utilizing its output port as a test port. The evaluations showed a calibration uncertainty of (0.28-2.2)% expressed by one standard deviation at the 1 mW level in the full band     

Radiation tolerance for the SMASH-series front-end chips for a silicon micro-strip detector

The radiation tolerance for prototype front-end chips designed for a silicon micro-strip detector was examined with a ⁶⁰Co irradiation source to establish an allowable range of the radiation dose. The irradiated front-end chips were SMA²SH-64A, a 64-channel preamplifier array; SMA²SH-1, a single-channel preamplifier circuit with a comparator; and Control-C, a digital-control chip for the preamplifiers.     

Cooling condition dependence on ion etching rate in a softmagnetic metallic glass

Taking into consideration the knock-on cascade mechanism and the free volume theory, the cooling condition dependentR _s (ion etching rate) is investigated for a liquid-quenched Fe-10at%Si-15at%B alloy glass. A highR _s is found in a slow cooled glass.     

Gain saturation dependence on signal wavelength in a travelling-wave semiconductor laser amplifier

Gain saturation dependence on signal wavelength in a 1.5 ?m InGaAsP travelling-wave semiconductor laser amplifier is experimentally studied. Saturation output powers were 6.9dBm, 8.3dBm and 10.6dBm for signal wavelengths of 1490 nm, 1510 nm and 1540 nm, respectively. This saturation dependence on wavelength, i.e. higher saturation output power for longer signal wavelength, results from signal gain peak shift towards longer wavelength with increasing input power.     

Using precise data sets on farming and pesticide properties to verify a diffuse pollution hydrological model for predicting pesticide concentration.

Verification of a diffuse pollution model involves comparing results actually observed with those predicted by precise model inputs. Acquisition of precise model inputs is, however, problematic. In particular, when the target catchment is large and substantial estimation uncertainty exists, not only model verification but also prediction is difficult. Therefore, in this study, rice-farming data were collected for all paddy fields from all farmers in a catchment and pesticide adsorption and degradation rates in paddy field soil samples were measured to obtain precise model inputs. The model inputs successfully verified the model's capability to predict pesticide concentrations in river water. Sensitivity analyses of the model inputs elucidated the processes significantly affecting pesticide runoff from rice farms. Pesticide adsorption and degradation rates of the soil did not significantly affect pesticide concentrations, although pesticide discharge to river water accounted for less than 50% of the total quantity of pesticide applied to fields, possibly owing to pesticide adsorption and degradation. The timing of increases in pesticide concentrations in river water was affected mostly by the farming schedule, including the time of pesticide application and irrigation, and secondarily by rainfall events.     

Chirp reduction in wavelength conversion using a laser diode byinjection locking

The authors demonstrate that an injection locking technique suppresses the chirp in wavelength conversion using a laser diode. Waveform patterns of a 2.5 Gbit/s intensity-modulated signal after 128 km transmission through a normal dispersion singlemode fibre were improved by the injection locking technique     

A study of suppression of vapor explosions by adding inversely soluble polymers

The mechanism of the suppression of vapor explosions by adding inversely soluble polymers in water is studied. Vapor explosion experiments and quench experiment are conducted using a silver test piece. Polymetric solution (polyethylene oxide), of concentrations from 0 to 500 wppm, whose normalized viscosity (by water) varies from 1.00 to 2.00, is used. No vapor explosion is observed in the aqueous polymer solution at a concentration higher than 200 wppm. Quench experiments using the silver test piece submerged in the polymer solution and water are performed in order to examine the stability of film boiling. The suppression of the vapor film collapse is attributed to the precipitation of polyethylene as a gel around the vapor film. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(4): 297–306, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10037