Corrosion rate of magnesium and its alloys in buffered chloride solutions

The effect of the buffer capacity of test solution on the corrosion rate of cast pure (>99.95 mass%) and high-purity (>99.9999 mass%) magnesium, and AZ31 and AZ91E has been studied. Their corrosion rates were measured gravimetrically in a pH 6.5 and a pH 9 borate buffer including chloride ions, and in a conventional chloride solution. Except for the AZ91E in the pH 6.5, the corrosion rates of all the examined materials depended solely on the pH of the test solution, although the materials had a variety of purity and alloying elements. Higher buffer capacity probably masked the detrimental effect of the “cathodic impurities”. The corrosion rates measured in the buffers were considered as giving the resistivity of the passive film to anodic reactions. The high-purity magnesium had a fair corrosion resistance even in conventional chloride solution.     

Polymerization via zwitterion 25. Alternating copolymerizations of cyclic acyl phosphorite and phosphite with vinyl monomers having an electron withdrawing group

Summary Spontaneous copolymerizations of cyclic acyl phosphonite (SPO) and phosphite (SPI) with an electron-deficient vinyl monomer such as methyl acrylate (MA), methyl vinyl ketone (MVK), and acrolein (AL), gave the corresponding alternating copolymers. These copolymerizations took place without added initiator and proceeded through zwitterion intermediates. Copolymer structures 1a, 1b, 2 and 3 have been established, all of which were derived in a regiospecific manner of ambident anions. The scheme of the copolymerizations is presented.     

In Situ Observation of Phase Separation of a Barium Borate Melt in a Stable Immiscibility Region under Microgravity

The precipitation of droplets was directly observed on a BaO–B₂O₃ melt in a drop shaft experiment. This is the first time that precipitation of droplets has been observed in a 4.5 s drop test. The melt film of 4BaOz96B₂O₃ (mol%) held on a platinum wire loop was heated above the critical tem-perature to produce uniformity and was cooled down to the phase separation temperature range. Phase separation of the melt was observed directly with a video camera. The IR image of the melt was simultaneously detected with a CCD array and was converted into a two-dimensional thermograph.     

Cationic ring-opening polymerization of 2-phenyl-1,3,6,2-trioxaphosphocane

Summary The ring-opening polymerization of 2-phenyl-1,3,-6,2-trioxaphosphocane (4), an eight-membered cyclic phosphonite, has been investigated. Cationic initiators of PhCH₂-Cl and MeOTf gave polymers, whereas anionic and radical initiators did not yield polymer. The structure of polymer was examined by IR, ¹H, ³¹P, and ³¹C NMR spectroscopy of polymers and elemental analysis as well as the alkaline hydrolysis products. The polymer consisted of two different units, i.e., the major part is the normal phosphinate structure 5 and the minor part is the isomerized unit 6 in 7% with PhCH₂Cl initiation and in 34% with MeOTf initiator. The difference in nature of propagating species from these two initiators are discussed in connection with their reactivities.On leave from the Institute of Chemistry, Academia Sinica, Beijing, China     

Cationic ring-opening polymerization of 2-phenyl-1,2-oxaphospholane (deoxophostone)

Summary The ring-opening polymerization of deoxophostone 5, a five-membered cyclic phosphinite, has been studied. Some cationic initiators gave polymer whereas anionic and radical initiators as well as metal chloride (Lewis acid) catalysts did not yield polymer. The polymer consisted of a phosphine oxide repeating unit 6. The polymerization proceeded via the Arbuzov-type reaction. The reduction of polymer 6 with a HSiCl₃/Et₃N system gave polyphosphine 7.     

A novel spin-finishing method for antistatic modification of polyester fiber. Surface reaction onto amine-containing copoly(amide-ethers) blended with polyester fiber

Copoly(amide-ethers) containing two types of tertiary amine units were made as antistatic modifiers for poly(ethylene terephthalate) (PET) fibers. The filaments of the copolymers were melt-spun and reacted with three alkylating agents in order to quaternize the tertiary amine into a sulfo-betaine, a carbobetaine, and an ammonium ion. The apparent electric resistivity of the filaments was greatly reduced by this reaction, being in the range of 10⁶ to 10⁸ Ω/cm. However, because these quaternized copolymers incurred decomposition during blend spinning with PET, a blend PET fiber containing one type of copoly(amide-ether) was melt-spun and subjected to quaternization of the amino groups as well as to surface crosslinking with various alkylating and epoxy agents. The quaternized blend fibers obtained showed improved antistatic properties compared with the original blend fiber. Particularly, the fibers crosslinked with epoxy compounds were found to have the best antistatic properties that had ever been attained with this type of modification. The antistatic properties were retained even after dyeing, because both hydrophilic and ionic groups had been effectively immobilized on the surface. Since this quaternization and crosslinking could be conducted on-line with spinning and drawing within a short reaction time, this modification technique is called “spin-finishing method”, which should be superior to the conventional methods in terms of cost performance and productivity.     

New ring-opening polymerization via a π-allylpalladium complex

Summary A binary system of a palladium complex as catalyst and zinc alkoxide as initiator conducted a novel ring-opening polymerization of cyclic carbonate, i. e., 5,5-dimethyl-4-ethenyl-1,3-dioxan-2-one. The polymerization proceeded along with releasing carbon dioxide to produce the corresponding polyether. The -allylpalladium complex generated from the monomer with the catalyst is the key intermediate for this new polymerization. The propagating end is zinc alkoxide, which nucleophilically attacks the monomer activated as the -allylpalladium complex in the propagation.     

Synthesis of Thermally Stable χ-Alumina by Thermal Decomposition of Aluminum Isopropoxide in Toluene

Thermal decomposition of aluminum isopropoxide in toluene at 315°C resulted in χ-alumina that had high thermal stability, whereas the reaction at lower temperatures resulted in formation of an amorphous product. The χ-alumina thus obtained directly transformed to α-alumina at ∼1150°C, bypassing the other transition alumina phases, whereas the amorphous product transformed to γ-alumina and then to θ-alumina before final transformation to α-alumina. When the χ-alumina, solvothermally synthesized at 315°C, was recovered by the removal of the solvent at the reaction temperature, thermal stability of the product was improved further. This procedure is convenient because it avoids bothersome work-up processes that yield large-surface-area and large-pore-volume alumina.     

Synthesis of poly(α-thiophenediyl)benzylidene with high molecular weight and its thermal stability

Summary The synthesis of poly(-thiophenediyl)benzylidene (PTB) with high molecular weight is described. Number-average degrees of polymerization reached about 74. The characterizations of the polymer was investigated by ¹H-NMR, ¹³C-NMR, IR, and UV-VIS spectra. The polymer with well-defined structure and high molecular weight was obtained by polymerization at low temperature and in polar solvent. This polymer was thermally stable and a thermal decomposition took place at 391°C under nitrogen and at 370°C under air. The glass transformation temperature was 117°C and this PTB was nonfusible.