Comparison between normal and reverse thin crystalline silicon solar cells

The newly developed ingot growing techniques, as the three-grain and the columnar multigrain ingot processes, are now offering the possibility of slicing thinner wafers (≤ 100 μm). In this paper we present the results obtained on p type large area (≥ 100 cm²) and 100 μm thick wafers by using both conventional and reverse cell manufacturing technologies.The conventional cells are provided with aluminium or boron BSF plus screen-printed silver mirror or a silver-aluminium net; the reverse cells have a FSF and the deep back junction completely covered by a screen-printed or CVD silver layer.The constructing parameters have been chosen on the base of one and two dimensions modeling and both raw material and devices have been completely characterized.This work shows that very thin wafers do not introduce serious problems for the conventional manufacturing of solar cells. The efficiencies of the normal and of the reverse cells are found to be comparable and are of the same order than those of thicker cells, however at a significant lower cost. The main obtained result has to be related to the demonstration of a cell manufacturing feasibility starting from very thin wafers.     

Genotypes of Staphylococcus aureus: On-farm epidemiology and the consequences for prevention of intramammary infections

Staphylococcus aureus is a highly contagious mastitis-causing pathogen infecting dairy cattle worldwide. Previous studies have shown the presence of different genotypes (GT) on farms. In Switzerland, Staph. aureus genotype B (GTB) is contagious, whereas GTC and other genotypes cause sporadic, noncontagious mastitis. In this study, we evaluated the epidemiological properties of Staph. aureus, together with its genotypes and spa types, on Swiss dairy farms. A total of 21 dairy farms were sampled throughout Switzerland; 10 farms were positive for the contagious Staph. aureus GTB and 11 farms were negative for GTB. Samples were taken from milk, body surfaces of dairy cattle and other animals, milkers, milking equipment, and environmental sites (e.g., parlor, washing room, stall floor, manger, and bedding). The epidemiology of Staph. aureus depended markedly on the genotype. Staphylococcus aureus GTB was associated with mammary gland, intramammary infections (IMI), and milking clusters, whereas GTC and other genotypes were related to cow and other animal surfaces and occasionally to environment. Genotype C was by far the most common subtype in cattle and was found on GTB-negative and GTB-positive farms. Each farm had a predominant genotype, such as GTB, GTC, GTA, or GTF, but a few farms were almost free from Staph. aureus. The genotypes and spa types of Staph. aureus detected in the noses of milkers clearly differed from those found in dairy cattle, other animals, milking equipment, and the environment. Exceptions were GTS (spa type t034) and GTF (t899), which crossed the species barrier. In most cases, however, the species barrier was maintained because Staph. aureus is adapted to a particular host and even to particular body sites. As biological properties differ among the genotypes, new guidelines to prevent IMI caused by different genotypes were established: classical measures to prevent IMI caused by contagious pathogens still hold for GTB but not for Staph. aureus genotypes that are opportunistic colonizers of bovine skin (e.g., GTC and GTA). For those genotypes, protection of the skin from minor lesions and wounds, particularly on the hocks, is essential.     

Effects of supplemental progesterone after artificial insemination on expression of interferon-stimulated genes and fertility in dairy cows

The objectives of the current study were to evaluate the effects of supplemental progesterone after artificial insemination (AI) on expression of IFN-stimulated genes (ISG) in blood leukocytes and fertility in lactating dairy cows. Weekly cohorts of Holstein cows were blocked by parity (575 primiparous and 923 multiparous) and method of insemination (timed AI or AI on estrus) and allocated randomly within each block to untreated controls, a controlled internal drug release (CIDR) containing 1.38 g of progesterone from d 4 to 18 after AI (CIDR4), or a CIDR on d 4 and another on d 7 after AI and both removed on d 18 (CIDR4+7). Blood was sampled to quantify progesterone concentrations in plasma and mRNA expression in leukocytes for the ubiquitin-like IFN-stimulated gene 15-kDa protein (ISG15) and receptor transporter protein-4 (RTP4) genes. Pregnancy was diagnosed on d 34 ± 3 and 62 ± 3 after AI. Treatment increased progesterone concentrations between d 5 and 18 after AI in a dose-dependent manner (control = 3.42, CIDR4 = 4.97, and CIDR4+7 = 5.46 ng/mL). Cows supplemented with progesterone tended to have increased luteolysis by d 19 after AI (control = 17.2; CIDR4 = 29.1; CIDR4+7 = 30.2%), which resulted in a shorter AI interval for those reinseminated after study d 18. Pregnancy upregulated expression of ISG in leukocytes on d 19 of gestation, but supplementing progesterone did not increase mRNA abundance for ISG15 and RTP4 on d 16 after insemination and tended to reduce mRNA expression on d 19 after AI. For RTP4 on d 19, the negative effect of supplemental progesterone was observed only in the nonpregnant cows. No overall effect of treatment was observed on pregnancy per AI on d 62 after insemination and averaged 28.6, 32.7, and 29.5% for control, CIDR4, and CIDR4+7, respectively. Interestingly, an interaction between level of supplemental progesterone and method of AI was observed for pregnancy per AI. For cows receiving exogenous progesterone, the lower supplementation with CIDR4 increased pregnancy per AI on d 62 in cows inseminated following timed AI (CIDR4 = 39.2; CIDR4+7 = 27.5%); in those inseminated following detection of estrus, however, the use of a second insert on d 7 resulted in greater pregnancy per AI (CIDR4 = 26.9; CIDR4+7 = 31.5%). Pregnancy loss did not differ among treatments. Supplemental progesterone post-AI using a single intravaginal insert on d 4 was beneficial to pregnancy in cows inseminated following timed AI, but incremental progesterone with a second insert on d 7 did not improve fertility of dairy cows.     

Optical tweezers for synchrotron radiation probing of trapped biological and soft matter objects in aqueous environments

Investigations of single fragile objects manipulated by optical forces with high brilliance X-ray beams may initiate the development of new research fields such as protein crystallography in an aqueous environment. We have developed a dedicated optical tweezers setup with a compact, portable, and versatile geometry for the customary manipulation of objects for synchrotron radiation applications. Objects of a few micrometers up to a few tens of micrometers size can be trapped for extended periods of time. The selection and positioning of single objects out of a batch of many can be performed semi-automatically by software routines. The performance of the setup has been tested by wide-angle and small-angle X-ray scattering experiments on single optically trapped starch granules, using a synchrotron radiation microbeam. We demonstrate here for the first time the feasibility of microdiffraction on optically trapped protein crystals. Starch granules and insulin crystals were repeatedly raster-scanned at about 50 ms exposure/raster-point up to the complete loss of the structural order. Radiation damage in starch granules results in the appearance of low-angle scattering due to the breakdown of the polysaccharide matrix. For insulin crystals, order along the densely packed [110] direction is preferentially maintained until complete loss of long-range order.     

Photochlorierung und metallorganische Folgereaktionen eines verzweigten Poly(carbosilans)

Photochlorination and Metalorganic Following Reactions of a Cross-linked Poly(carbosilane) The synthesis of a perchlorinated cross-linked poly(carbosilane) of the general composition [(Cl₂Si)_1,5(SiCl) (CCl₂)₃]_x ( II ) was achieved through the photochlorination of [(Cl₂Si)_1,5(SiCl)(CH₂)₃]_x ( I ). The perchlorinated product was investigated by elemental analysis and spectroscopic methods. Furthermore the permethylated and perphenylated compounds [(Me₂Si)_1,5(SiMe)(CMe₂)₃]_x ( III ) and [(Ph₂Si)_1,5(SiPh)(CPh₂)₃]_x ( IV ) were synthesized by reactions with methyl- and phenyllithium. The products obtained were characterized by elemental analysis and ¹H, ¹³C, ²⁹Si NMR and IR spectroscopy. The number and weight averages M_n and M_w were determined by gel permeation chromatography.     

Sol–Gel Synthesis of λ–Na2O·xAl2O3 Films

Na₂O· x Al₂O₃ ( x = 9, 11)films have been obtained by sol–gel method. Crystallization processes during heat treatments have been investigated by X–ray diffraction analysis. A metastable phase with the mullite structure, λ–Na₂O· x Al₂O₃, has been observed starting from 800°C. Films remained stable after a heat treatment at 1000°C for 250 h. Impedance spectroscopy measurements showed that the films of λ-Na₂O· x Al₂O₃ possess a large three–dimensional ionic conductivity at 400°C.     

Linux real-time framework for fusion devices

A new framework for the development and execution of real-time codes is currently being developed and commissioned at JET. The foundations of the system are Linux, the Real Time Application Interface (RTAI) and a wise exploitation of the new i386 multi-core processors technology.The driving motivation was the need to find a real-time operating system for the i386 platform able to satisfy JET Vertical Stabilisation Enhancement project requirements: 50 μs cycle time. Even if the initial choice was the VxWorks operating system, it was decided to explore an open source alternative, mostly because of the costs involved in the commercial product.The work started with the definition of a precise set of requirements and milestones to achieve: Linux distribution and kernel versions to be used for the real-time operating system; complete characterization of the Linux/RTAI real-time capabilities; exploitation of the multi-core technology; implementation of all the required and missing features; commissioning of the system.Latency and jitter measurements were compared for Linux and RTAI in both user and kernel-space. The best results were attained using the RTAI kernel solution where the time to reschedule a real-time task after an external interrupt is of 2.35 ± 0.35 μs. In order to run the real-time codes in the kernel-space, a solution to provide user-space functionalities to the kernel modules had to be designed. This novel work provided the most common functions from the standard C library and transparent interaction with files and sockets to the kernel real-time modules. Kernel C++ support was also tested, further developed and integrated in the framework.The work has produced very convincing results so far: complete isolation of the processors assigned to real-time from the Linux non real-time activities, high level of stability over several days of benchmarking operations and values well below 3 μs for task rescheduling after external interrupt. From being the alternative option, RTAI has been finally chosen as the platform for the project. A first stable version of the framework has been integrated on the JET system and is already being commissioned. It will be soon be used on the Vertical Stabilisation Enhancement for the Plasma Control Upgrade (PCU) project at JET.     

Energy demand in the Norwegian building stock: Scenarios on potential reduction

A model has been developed for studying the effect of three hypothetical approaches in reducing electricity and energy demand in the Norwegian building stock: wide diffusion of thermal carriers, heat pumps and conservation measures, respectively. Combinations of these are also considered. The model has a demand side perspective, considers both residential and service sectors, and calculates energy flows from net to delivered energy. Energy demand is given by the product of activity and intensity matrices. The activity levels are defined for the stock and the new construction, renovation and demolition flows. The intensity properties are defined in archetypes, and are the result of different energy class and heating carriers share options. The scenarios are shaped by combining the activity flows with different archetypes. The results show that adopting conservation measures on a large scale does allow reducing both electricity and total energy demand from present day levels while the building stock keeps growing. The results also highlight the importance of making a clear distinction between the assumptions on intensity and activity levels.