INFLUENCE OF DESIGN AND OPERATING CONDITIONS ON THE SYSTEM PERFORMANCE OF A TWO-STAGE ADSORPTION CHILLER

This article aims at clarifying the possible design and operating conditions for silica gel-water adsorption refrigeration cycles driven by near-ambient temperature waste heat sources (between 45 and 75°C) with relatively small regenerating temperature lifts (15 to 45 K). A two-stage silica gel-water advanced adsorption chiller is introduced and a simulation model of the chiller was developed to analyze the influence of operating and design conditions on the system performance (coefficient of performance, COP, and cooling capacity). It was hypothesized that the proposed chiller can be driven by low temperature waste heat at 55°C to produce effective cooling. Simulation results show that the operating conditions such as cycle time and hot and cooling water inlet temperature have an influential effect on cooling capacity and COP. COP is proportional to cycle time and heat transfer coefficient as well as inversely proportional to the cooling water inlet temperature, while there are optimum values of hot water temperature and silica gel weight for maximum COP. Cooling capacity mainly improves with the addition of silica gel weight and decreases as cooling water temperature increases. Simulation results also revealed that the system performance can be improved significantly by setting the design and operating conditions optimally.     

Synthesis and nuclear magnetic resonance properties of all geometrical isomers of conjugated linoleic acids

Pure geometric isomers of conjugated linoleic acid were prepared from castor oil as the primary starting material. Methyl octadeca-9Z, 11E-dienoate (2) and methyl octadeca-9Z, 11Z-dienoate (4) were obtained by zinc reduction of methyl santalbate (1, methyl octadec-11E-en-9-ynoate) and methyl octadec-11 Z-en-9-ynoate (3), respectively, as the key intermediates. Methyl octadeca-9E, 11E-dienoate (8) and methyl octadeca-9E, 11Z-dienoate (9) were prepared by demesylation of the mesyloxy derivative of methyl ricinelaidate (6, methyl 12-hydroxy-octadec-9 E-enoate). A study of the nuclear magnetic resonance spectral properties was carried out and the shifts of the olefinic carbon atoms of 18:2(9Z, 11E) (2) and 18:2(9E, 11Z) (9) were readily identified by a combination of incredible natural abundance double quantum transfer experiment, heteronuclear multiple bond correlation, and ¹H−¹³C correlation spectroscopy correlation techniques. Doubts remain in the absolute identification of the individual olefinic carbon atoms of the 18:2(9Z, 11Z) (4) and 18:2(9E, 11E) (8), except the fact that the shifts of the “inner” (C-10 and C-11) and “outer” (C-9 and C-12) positioned olefinic carbon atoms of the conjugated diene system are distinguishable.     

Synthetic Modular Antibody Construction by Using the SpyTag/SpyCatcher Protein-Ligase System

Efforts to engineer recombinant antibodies for specific diagnostic and therapy applications are time consuming and expensive, as each new recombinant antibody needs to be optimized for expression, stability, bio-distribution, and pharmacokinetics. We have developed a new way to construct recombinant antibody-like “devices” by using a bottom-up approach to build them from well-behaved discrete recombinant antibody domains or “parts”. Studies on antibody structure and function have identified antibody constant and variable domains with specific functions that can be expressed in isolation. We used the SpyTag/SpyCatcher protein ligase to join these parts together, thereby creating devices with desired properties based on summed properties of parts and in configurations that cannot be obtained by using genetic engineering. This strategy will create optimized recombinant antibody devices at reduced costs and with shortened development times.     

Visible Light-Induced Degradation of Methylene Blue in the Presence of Photocatalytic ZnS and CdS Nanoparticles

ZnS and CdS nanoparticles were prepared by a simple microwave irradiation method under mild conditions. The obtained nanoparticles were characterized by XRD, TEM and EDX. The results indicated that high purity of nanosized ZnS and CdS was successfully obtained with cubic and hexagonal crystalline structures, respectively. The band gap energies of ZnS and CdS nanoparticles were estimated using UV-visible absorption spectra to be about 4.22 and 2.64 eV, respectively. Photocatalytic degradation of methylene blue was carried out using physical mixtures of ZnS and CdS nanoparticles under a 500-W halogen lamp of visible light irradiation. The residual concentration of methylene blue solution was monitored using UV-visible absorption spectrometry. From the study of the variation in composition of ZnS:CdS, a composition of 1:4 (by weight) was found to be very efficient for degradation of methylene blue. In this case the degradation efficiency of the photocatalyst nanoparticles after 6 h irradiation time was about 73% with a reaction rate of 3.61 × 10⁻³ min⁻¹. Higher degradation efficiency and reaction rate were achieved by increasing the amount of photocatalyst and initial pH of the solution.     

Novel superabsorbent materials from bacterial cellulose

A novel process for the production of superabsorbent materials (hydrogels) from bacterial cellulose (BC) was developed. Prior to crosslinking with a water‐soluble polyethylene glycol diacrylate (PEGDA), BC was first carboxymethylated and functionalized with glycidyl methacrylate. The degree of crosslinking influenced the swelling properties of the hydrogels. The use of greater amounts of PEGDA enhanced the formation of a thicker macromolecular network containing fewer capillary spaces in the crosslinked gel. The maximum water retention value of the hydrogels containing 2.5–3.5 mmol of carboxyl groups per gram of gel reached 125 g g^?1 in distilled water, and 29 g g^?1 in saline (0.9% NaCl solution). The highly porous hydrogel architecture with a pore size of 350–600 µm created a high specific surface area. This enables rapid mass penetration in superabsorbent applications. The superabsorbent hydrogels reached 80% of their maximum water absorption capacity in 30 min. © 2018 Society of Chemical Industry     

Synthesis of Triazole-Based Nonionic Surfactants for Nanostructured Drug Delivery: Investigation of Their Physicochemical and Biological Aspects

Synthesis of novel nonionic surfactants has attracted attention of synthetic chemists due to the issues of the currently used commercial surfactants. The synthesis of three biocompatible triazole-based nonionic surfactants is reported for nanovesicular drug loading. The surfactants were synthesized in a three-step reaction and characterized using ¹HNMR and mass spectroscopy techniques. They were investigated for their critical micelle concentration (CMC) using a UV–Visible spectrophotometer. Their biocompatibility was investigated against cell culture and in blood. All the synthesized nonionic surfactants were further explored for their nanovesicular drug loading using clarithromycin as a model hydrophobic drug. Nonionic surfactants revealed lower CMC in 35–45 μM and were less hemolytic and cytotoxic. They were capable of self-assembling in nanosize niosomal vesicles encapsulating increased amounts of drug. The results suggest the synthesized nonionic surfactants as biocompatible nanotechnology-based drug-delivery vehicles.     

Epoxide functionalized γ-Al2O3/Fe3O4/SiO2 nanocomposite and comparative adsorption behavior of a model reactive azo dye

In this investigation, magnetic γ-Al₂O₃ nanocomposite polymer particles with epoxide functionality were prepared following a multistep process. The prepared nanocomposite polymer particle was named as γ-Al₂O₃/Fe₃O₄/SiO₂/poly(glycidyl methacrylate (PGMA). The surface property was evaluated by carrying out the adsorption study of Remazol Navy RGB (RN), a model reactive azo dye, on both γ-Al₂O₃/Fe₃O₄/SiO₂ and γ-Al₂O₃/Fe₃O₄/SiO₂/PGMA nanocomposite particles, that is, before and after epoxide functionalization. A contact time, temperature, adsorbent dose, and dye concentration dependent change in adsorption behavior was observed on both nanocomposite particles. The adsorption amount reached equilibrium (q_e) value within 5 minutes at the respective point of zero charge (PZC). The adsorption density of RN per unit specific surface area on epoxide functional γ-Al₂O₃/Fe₃O₄/SiO₂/PGMA nanocomposite polymer particles (1.30 mg/m²) was higher relative to that on γ-Al₂O₃/Fe₃O₄/SiO₂ nanocomposite particles (0.87 mg/m²). The optimum adsorbent dose for obtaining the maximum adsorption density was 0.01 g. Comparatively, Langmuir isotherm model was better to describe the adsorption process and the adsorption process was favorable at low temperature (283 K). Batch kinetic adsorption experiment suggested that a pseudo-second-order rate kinetic model is more appropriate. Nanocomposite polymer particles were used as adsorbent up to third cycle with almost 99% adsorption efficiency.     

Soft Template Synthesis of Super Paramagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles a Novel Technique

The present study reports a facile technique for the synthesis of crystalline super paramagnetic nano ferrite (Fe₃O₄) particles using diethyl amine as a soft template. The spectral properties of Fe₃O₄ nanoparticles were characterized by UV–visible and Fourier Transform Infrared (FTIR) spectroscopies while the crystalline structure and particle size was estimated using X-Ray diffraction (XRD) as well as transmission electron microscopy (TEM) techniques. The super paramagnetic behavior of Fe₃O₄ nanoparticles was determined using vibrating sample magnetometer (VSM) at 300 K. The results of the studies revealed that this technique could be adopted to synthesize agglomerate free super paramagnetic Fe₃O₄ nanoparticles which may find potential application in the filed of biosensor and corrosion protective coatings.     

Corrosion-protective performance of nano polyaniline/ferrite dispersed alkyd coatings

The application of nanotechnology in the corrosion protection of metals has recently gained momentum. A polymer nanocomposite coating can effectively combine the benefits of organic polymers, such as elasticity and water resistance, to that of advanced inorganic materials, such as hardness and permeability. Environmental impact can also be improved by utilizing nanostructure particulates in coatings and eliminating the requirement of toxic solvents. Nanocomposites have also proven to be an effective alternative to phosphate-chromate pretreatment of metallic substrate, which is hazardous due to the presence of toxic hexavalent chromium. This article reports some of the preliminary investigations on the corrosion-resistance performance of soya oil alkyd, containing polyaniline/ferrite nanocomposite. The corrosion-protective performance was evaluated in terms of physico-mechanical properties, corrosion rate, and SEM studies. The polyaniline/ferrite nanocomposite coatings were found to show a far superior corrosion-resistance performance compared to that of a pure PANI/alkyd system.     

Fabrication and morphological control of three-dimensional cage type mesoporous titanosilicate with extremely high Ti content

TiSBA-1 materials with extremely high Ti content, up to silicon to titanium ratio (n_Si/n_Ti) of 2.4, have been successfully prepared through direct synthesis method by controlling the molar ratio of hydrochloric acid to silicon (n_HCl/n_Si). It has been found that the amount of Ti content and the structure of the TiSBA-1 can easily be controlled by the simple adjustment of n_HCl/n_Si ratio. X-ray diffraction pattern (XRD) of the obtained materials revealed that the materials are highly ordered and possess cubic three-dimensional cage type structure with open windows. N₂ adsorption–desorption measurement confirmed the narrow pore size distribution, high specific surface area (1317–1491 m² g⁻¹), and large specific pore volume (0.68–0.75 cm³ g⁻¹) for all the samples. UV–vis DR spectra of the prepared materials confirmed that Ti atoms are exclusively incorporated within silica framework and occupy the tetrahedral position while the presence of isolated bulk titania could be negligible. Morphologies of the TiSBA-1 materials have been also controlled by simply adjusting the n_Si/n_Ti ratio. With the appropriate Ti content, TiSBA-1 materials can be obtained as regular fine spheres. Moreover, the detailed mechanism on the morphological and phase transition control, and the incorporation of high amount of Ti in the framework of TiSBA-1 materials has been also discussed in detail.