ENGAGE compatibilized HDPE/EPDM blends: Modification of some industrially pertinent properties and morphology upon incorporation of Mg(OH)2 filler and electron beam crosslinked network

To observe the effect of ENGAGE (a poly‐olefin elastomer) on compatibilization of industrially important incompatible blend, high‐density polyethylene (HDPE)/ethylene‐propylene diene elastomer (EPDM), 15 wt % ENGAGE is incorporated into the system and the latter is found satisfactorily efficient as compatibilizer for the above system. To improve some industrially pertinent properties another strategies are also followed in addition, incorporation of magnesium hydroxide [Mg(OH)₂] and electron beam (EB) crosslinking into the system. The gel content was found to increase with radiation dose, EPDM content and Mg(OH)₂ dispersion. ENGAGE interestingly increases the gel content that is, promotes crosslinking. It is unique that filler dispersion and crosslinked network formation maintain the compatibility of the ternary system, which is confirmed by X‐ray diffraction, differential scanning calorimetry, mechanical properties, and scanning electron microscope. The compatibilization, Mg(OH)₂ dispersion, and EB crosslinking improve the mechanical, thermo mechanical, flame retardant properties, and phase morphology considerably. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44922.     

Extreme Two‐Phase Cooling from Laser‐Etched Diamond and Conformal,Template‐Fabricated Microporous Copper

This paper reports the first integration of laser‐etched polycrystalline diamond microchannels with template‐fabricated microporous copper for extreme convective boiling in a composite heat sink for power electronics and energy conversion. Diamond offers the highest thermal conductivity near room temperature, and enables aggressive heat spreading along triangular channel walls with 1:1 aspect ratio. Conformally coated porous copper with thickness 25 µm and 5 µm pore size optimizes fluid and heat transport for convective boiling within the diamond channels. Data reported here include 1280 W cm^?2 of heat removal from 0.7 cm² surface area with temperature rise beyond fluid saturation less than 21 K, corresponding to 6.3 × 10⁵ W m^?2 K^?1. This heat sink has the potential to dissipate much larger localized heat loads with small temperature nonuniformity (5 kW cm^?2 over 200 µm × 200 µm with <3 K temperature difference). A microfluidic manifold assures uniform distribution of liquid over the heat sink surface with negligible pumping power requirements (e.g., <1.4 × 10^?4 of the thermal power dissipated). This breakthrough integration of functional materials and the resulting experimental data set a very high bar for microfluidic heat removal.     

Symptotics: a framework for estimating the scalability of real-world wireless networks

We present a framework for non-asymptotic analysis of real-world multi-hop wireless networks that captures protocol overhead, congestion bottlenecks, traffic heterogeneity and other real-world concerns. The framework introduces the concept of symptotic scalability to determine the number of nodes to which a network scales, and a metric called change impact value for comparing the impact of underlying system parameters on network scalability. A key idea is to divide analysis into generic and specific parts connected via a signature—a set of governing parameters of a network scenario—such that analyzing a new network scenario reduces mainly to identifying its signature. Using this framework, we present the first closed-form symptotic scalability expressions for line, grid, clique, randomized grid and mobile topologies. We model both TDMA and 802.11, as well as unicast and broadcast traffic. We compare the analysis with discrete event simulations and show that the model provides sufficiently accurate estimates of scalability. We show how our impact analysis methodology can be used to progressively tune network features to meet a scaling requirement. We uncover several new insights, for instance, on the limited impact of reducing routing overhead, the differential nature of flooding traffic, and the effect real-world mobility on scalability. Our work is applicable to the design and deployment of real-world multi-hop wireless networks including community mesh networks, military networks, disaster relief networks and sensor networks.     

Factor market distortions and backward incidence of pollution control

This paper analyzes the backward incidence of stronger pollution control into factors of production using a two-sector general equilibrium model in which the economy experiences perfect capital mobility but norigid factor price differential. In this context we conclude that higher levels of wage and capital rental differentials may act as an effective control over the pollution emission in the economy when factor price differentials directly depend on the pollution level.     

Toughening of Epoxy Resin with Solid Amine Terminated Poly （ethylene glycol） Benzoate and Effect of Red Mud Waste Particles

An investigation was carried out to modify the toughness of triethylene tetramine cured DGEBA （diglycidyl ether of bisphenol-A） resin using solid amine terminated poly （ethylene glycol） benzoate （ATPEGB） as modifier with and without red mud waste particles. The solid ATPEGB modifier synthesized from the acid catalyzed esterification reaction of poly （ethylene glycol） （PEG） and 4-amino benzoic acid was characterized by Fourier transform infrared spectroscopy （FT-IR） and ^1H-NMR （nuclear magnetic resonance） spectroscopies, viscosity measurements, and solubility parameter calculation. The unfilled and red mud waste filled modified epoxy networks were evaluated with impact, adhesive, tensile, flexural and thermal properties by differential scanning calorimetry （DSC）, thermogravimetric （TG） and dynamic mechanical analysis （DMA）. The effect of modifier concentration and red mud waste particles on toughening behavior was also investigated. The optimum properties were obtained at 12.5 phr （parts per hundred parts of resin） concentration of the modifier. The ATPEGB modified cured epoxy was thermally stable up to 315℃. The morphology on fracture surfaces of cured epoxy was also analyzed by scanning electron microscopy （SEM）.     

Structural,Mechanical and Dielectric Properties of Microwave-Assisted High-Energy Ball Milling Synthesis of Hydroxyapatite

Abstract

In the present work, the effect of high-energy ball milling (HEBM) of starting precursors of hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂)/HA system on the processing temperature, morphological, mechanical, and electrical properties are highlighted. Calcination and sintering of HA system were carried out in microwave furnace. XRD study confirmed the evolution of HA phase and EDX analysis confirmed Ca/P ratio ～1.65. Grain size of HA samples, synthesized by using microwave-assisted HEBM technique was found to be in the order of 54–75?nm. Enhanced dielectric and mechanical properties were obtained in HA samples.     

Contribution of Dysregulated DNA Methylation to Autoimmunity

Epigenetic mechanisms, such as DNA methylation, histone modifications, and non-coding RNAs are known regulators of gene expression and genomic stability in cell growth, development, and differentiation. Because epigenetic mechanisms can regulate several immune system elements, epigenetic alterations have been found in several autoimmune diseases. The purpose of this review is to discuss the epigenetic modifications, mainly DNA methylation, involved in autoimmune diseases in which T cells play a significant role. For example, Rheumatoid Arthritis and Systemic Lupus Erythematosus display differential gene methylation, mostly hypomethylated 5′-C-phosphate-G-3′ (CpG) sites that may associate with disease activity. However, a clear association between DNA methylation, gene expression, and disease pathogenesis must be demonstrated. A better understanding of the impact of epigenetic modifications on the onset of autoimmunity will contribute to the design of novel therapeutic approaches for these diseases.     

Effect of graft copolymerization of mixtures of acrylamide and methyl methacrylate on mechanical properties of jute fibers of different compositions

The role of persulfate-induced graft copolymerization of mixtures of acrylamide and methyl methacrylate at 50°C in modifying mechanical properties of jute fibers of different compositions was studied in a limited aqueous system following a pretreatment technique. Results obtained indicate that such a process admits a good scope for modification of mechanical properties of jute fiber depending on degree of grafting achieved and compositional variations of (1) the feed monomer mixture and (2) the multiconstituent jute itself, consequent to selective removal of lignin and hemicellulose to different extents from the fiber. Low to moderate removal of hemicellulose is more effective than a similar degree of removal of lignin from jute in rendering the fiber more amenable to vinyl grafting using the mixed monomer system without being adversely affected with respect to tensile properties. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1139–1147, 1998     

Electronic fingerprints of DNA bases on graphene

We calculate the electronic local density of states (LDOS) of DNA nucleotide bases (A,C,G,T), deposited on graphene. We observe significant base-dependent features in the LDOS in an energy range within a few electronvolts of the Fermi level. These features can serve as electronic fingerprints for the identification of individual bases in scanning tunneling spectroscopy (STS) experiments that perform image and site dependent spectroscopy on biomolecules. Thus the fingerprints of DNA-graphene hybrid structures may provide an alternative route to DNA sequencing using STS.