Robust Multimodal Biometric System Based on Feature Level Fusion of Optimiseddeepnet Features

Wireless Personal Communications - Multimodal biometric systems combine feature knowledge from multiple traits to overcome shortcomings of unimodal systems. However, most of the traditional...     

Growth of high quality CdTe and ZnTe on Si substrates using organometallic vapor phase epitaxy

Epitaxial (100) CdTe and ZnTe layers with high crystalline quality have been grown on Si substrates by atmospheric pressure organometallic vapor phase epitaxy (OMVPE). A thin Ge interfacial layer grown at low temperature was used as a buffer layer prior to ZnTe and CdTe growth. The layers were characterized by Nomarski optical microscopy and double crystal x-ray diffraction. Double crystal rocking curves with full width at half maximum of about 110 and 250 arc-sec have been obtained for a 7 μm thick ZnTe layer and a 4 μm thick CdTe layer, respectively. The results presented demonstrate a novel method ofin-situ Si cleaning step without a high temperature deoxidation process to grow high quality CdTe and ZnTe on Si in a single OMVPE reactor.     

Room-Temperature Quantum Cascade Laser: ZnO/Zn1−x Mg x O Versus GaN/Al x Ga1−x N

A ZnO/Zn_1?x Mg _x O-based quantum cascade laser (QCL) is proposed as a candidate for generation of THz radiation at room temperature. The structural and material properties, field dependence of the THz lasing frequency, and generated power are reported for a resonant phonon ZnO/Zn_0.95Mg_0.05O QCL emitting at 5.27 THz. The theoretical results are compared with those from GaN/Al _x Ga_1?x N QCLs of similar geometry. Higher calculated optical output powers [ $ {P}_{\rm{ZnMgO}} $  = 2.89 mW (nonpolar) at 5.27 THz and 2.75 mW (polar) at 4.93 THz] are obtained with the ZnO/Zn_0.95Mg_0.05O structure as compared with GaN/Al_0.05Ga_0.95N QCLs [ $ {P}_{\rm{AlGaN}} $  = 2.37 mW (nonpolar) at 4.67 THz and 2.29 mW (polar) at 4.52 THz]. Furthermore, a higher wall-plug efficiency (WPE) is obtained for ZnO/ZnMgO QCLs [24.61% (nonpolar) and 23.12% (polar)] when compared with GaN/AlGaN structures [14.11% (nonpolar) and 13.87% (polar)]. These results show that ZnO/ZnMgO material is optimally suited for THz QCLs.     

Design and Implementation of Optical Signal Reinstatement Technique for High DPSK RZ Transceiver Scheme

Wireless Personal Communications - Optical signal reinstatement (OSR) is a common technique used in high-speed communication systems. OSR can be achieved using various techniques such as;...     

Extracellular recordings from patterned neuronal networks using planar microelectrode arrays

Neuronal cell networks have been reconstructed on planar microelectrode arrays (MEAs) from dissociated hippocampal pyramidal neurons. Microcontact printing (microCP) and a photoresist-liftoff method were used to selectively localize poly-L-lysine (PLL) on the surface of MEAs. Haptotaxis led to the organization of the neurons into networks localized adjacent to microelectrodes. Various grids of PLL with 2-25-microm-wide lines spaced by 50-200 microm with 15-25-microm nodes at intersection points were used to guide cell body attachment and neurite outgrowth. Bursting activity with spike amplitude attenuation was observed, and multichannel recordings detected instances of coincident firing activity. Finally, we present here an extracellular recording from a approximately 2 microm bundle of guided neurites.     

Carrier dynamics in high-speed (f/sub -3 dB/>40 GHz) 0.98-/spl mu/m multiquantum-well tunneling injection lasers determined from electrical impedance measurements

Carrier capture times in InGaAs-AlAs-GaAs 0.98-/spl mu/m multiquantum-well tunneling injection lasers with f/sub -3 dB//spl sim/43-48 GHz have been determined from analysis of high frequency electrical impedance measurements. The capture times range from 14 ps, at biases around threshold, to about 1 ps, at 50-mA bias. The small capture times agree well with tunneling times obtained directly from pump-probe measurements. The impedance measurements also suggest that the carrier lifetime in the well is much less than the escape time from the well, consistent with the cold carrier distribution associated with a tunneling injection mechanism.     

Convergence behavior of the first-order time-delay digital tanlockloop

Convergence behavior of the previously proposed time-delay digital tanlock loop (TDTL) is analyzed. The approach is built on the actual number of steps required for the convergence of the phase error to its steady-state value. Unlike the first-order conventional digital tanlock loop (CDTL), the Lipschitz bound of TDTL is not a tight limit for the actual convergence time, especially for higher values of the absolute difference between the initial and the steady-state phase errors. For a frequency step input, the first-order TDTL locks faster than CDTL under suitable arrangement of the loop parameters     

Intelligibility improvements using binaural diverse sub-bandprocessing applied to speech corrupted with automobile noise

The paper reports on experiments assessing the capability of a diverse processing, multi-microphone sub-band adaptive signal processing scheme for improving the intelligibility of speech corrupted with automobile noise. Results from formal listening tests demonstrate a significant improvement in the intelligibility and quality of the processed speech. Spoken digits corrupted with automobile noise at a low and a high signal-to-noise ratio were used with two commercial speech recognisers. The results obtained with the recognisers did not demonstrate any statistically significant improvement due to processing in sub-bands     

A CMOS digitally programmable filter technique for VLSI applications

A novel technique for designing analog CMOS integrated filters is proposed. The technique uses digitally controlled current amplifiers (DCCAs) to provide precise frequency and/or gain characteristics that can be digitally tuned over a wide range. This paper provides an overview of the possibilities of using the DCCA as the core element in programmable filters. In mixed analog/digital systems, the digital tuning feature of the proposed approach allows direct interfacing with the digital signal processing (DSP) part. Basic building blocks such as digitally programmable amplifiers, integrators, and simulated active inductors are given. Systematic designs of second-order filters are presented. Fully differential architectures of the proposed circuits are developed. Experimental results obtained from 0.5 μm standard CMOS chips are provided.     

The use of elastography to measure quality characteristics of pork semimembranosus muscle

The objectives of this study were to determine if ultrasonic strain image analysis could estimate pork eating quality parameters (such as fresh color, drip loss, and Warner/Bratzler shear). Intact semimembranosus (SM) muscles (cap off) were analyzed for ultimate pH (pH(ult)). Forty-five SM muscles were selected from the larger allotment of fresh hams over a 3-week period. The SM muscles were selected based on high and low pH(ult) in an attempt to represent a wide range of pork quality. Ultrasonic strain images were obtained perpendicular to the SM muscle fibers of an 8-cm cube. Radio-frequency data from each SM were obtained from a field-of-view (FOV) of 40×30 mm(2) and digitized for each compression step. Tissue displacements were computed for each compression step. Tissue strains were computed from displacement data located in the FOV representing areas of harder and softer muscle tissue and converted to gray scale images at 256 levels. Tissue irregularity of hardness and softness was measured using Fractal dimension and Haralicks parameters. Twenty-one Fractal dimension (FR) parameters, at two neighborhood distances (N), from each strain image and nine Haralick's (HAR) textural parameters (inter-pixel distance=1) were analyzed for each image. The variable FR4N4 had a -0.279 correlation with SM ultimate pH (p<0.10); FR6N8 correlated to WB shear force at 0.325 (p<0.05); and FR21N8 had a correlation coefficient of 0.364 with intramuscular fat (p<0.01). Linear regression equations generated from FRN and HAR parameters for intramuscular fat (R(2)=0.468), Warner/Bratzler shear (R(2)=0.360), and 30 h drip loss (R(2)=0.208). Although elastographic measurement was significantly correlated to shear (p<0.05), a better understanding of physical meat texture is necessary before elastography can be used to identify superior quality pork.