Electrical conductivity of tetragonal stabilized zirconia

The electrical conductivity change on annealing for tetragonal stabilized zirconia (TZP) was studied with the help of a.c. impedance dispersion analysis techniques. The dependences of the conductivity on annealing time at 1000 ° C and on temperature cycling between room temperature and 1000 ° C were investigated. A decrease in conductivity of about 30% at 1000 ° C of TZP with 3 mol% Y₂O₃ was observed during the first 200 h of annealing at 1000 ° C, and no change was observed during further annealing. A similar result was observed for TZP with 2.9 mol% Sc₂O₃. For TZP with 3.0mol% Yb₂O₃, the conductivity decreased gradually during an annealing time of over 2000 h. The impedance dispersion analysis at lower temperature suggested that the decrease in electrical conductivity by annealing at 1000 ° C could be attributed to the increases of both grain boundary and intragrain resistance. No monoclinic phase was observed for the samples annealed at 1000 ° C for 2000 h. On the other hand, a trace of a monoclinic phase was found for TZP with 3mol% Y₂O₃ after the 50th temperature cycling, but no significant decrease in conductivity was observed with the cycling.     

Characterization of electrode/electrolyte interface for lithium batteries using in situ synchrotron X-ray reflectometry—A new experimental technique for LiCoO2 model electrode

A new experimental technique was developed for detecting structure changes at electrode/electrolyte interface of lithium cell using X-ray reflectometry and two-dimensional model electrodes with a restricted lattice-plane. The electrodes were constructed with an epitaxial film of LiCoO₂ synthesized by pulsed laser deposition method. The orientation of the epitaxial film depends on the substrate plane; the 2D layer of LiCoO₂ is parallel to the SrTiO₃ (1 1 1) substrate (_(0 0 3)LiCoO₂//_(1 1 1)SrTiO₃)$({(003)}_{\text{LiCo}{\text{O}}_2}//{(111)}_{\text{SrTi}{\text{O}}_3})$, while the 2D layer is perpendicular to the SrTiO₃ (1 1 0) substrate (_(1 1 0)LiCoO₂//_(1 1 0)SrTiO₃)$({(110)}_{\text{LiCo}{\text{O}}_2}//{(110)}_{\text{SrTi}{\text{O}}_3})$. The anisotropic properties were confirmed by electrochemical measurements. Ex situ X-ray reflectivity measurements indicated that the impurity layer existed on the as-grown LiCoO₂ was dissolved and a new SEI layer with lower density was formed after soaking into the electrolyte. In situ X-ray reflectivity measurements indicated that the surface roughness of the intercalation (1 1 0) plane increased with applying voltages, while no significant changes in surface morphology were observed for the intercalation non-active (0 0 3) plane during the pristine stage of the charge–discharge process.     

Study of polarization phenomena in Schottky CdTe diodes using infrared light illumination

Schottky CdTe diode detectors suffer from a polarization phenomenon, which is characterized by degradation of the spectral properties over time following exposure to high bias voltage. This is considered attributable to charge accumulation at deep acceptor levels. A Schottky CdTe diode was illuminated with an infrared light for a certain period during a bias operation, and two opposite behaviors emerged. The detector showed a recovery when illuminated after the bias-induced polarization had completely progressed. Conversely, when the detector was illuminated before the emergence of bias-induced polarization, the degradation of the spectral properties was accelerated. Interpretation of these effects and discussion on the energy level of deep acceptors are presented.     

Block Copolymer Permeable Membrane with Visualized High‐Density Straight Channels of Poly(ethylene oxide)

A simple fabrication, scalable to centimeter scale, of a permeable membrane made of block copolymer containing molecular transport channels is demonstrated by coating photo‐crosslinkable liquid‐crystalline block copolymer, consisting of poly(ethylene oxide) (PEO) and poly(methacrylate) (PMA) bearing stilbene (Stb) mesogens in the side chains (PEO₁₁₄‐b‐PMA(Stb)₅₂), onto a sacrificial cellulose acetate film substrate. After thermal annealing, perpendicularly aligned and hexagonally arranged PEO cylindrical domains with a surface density of 10¹¹ cm^?2 were formed and then fixed efficiently by photo‐crosslinking the stilbene moieties in the PMA(Stb) domains by [2 + 2] dimerization. The fully penetrating straight PEO cylindrical domains across the 480‐nm‐thick membrane were well‐defined and visualized as molecule‐transport channels. After exfoliated by removal of the cellulose acetate layer, the membrane could be transferred onto another substrate by either scooping or a horizontal lifting method. Throughout the processes, the fully penetrating PEO channels across the membrane are preserved to open at both ends. A simple permeation experiment demonstrates that rhodamine dyes permeate efficiently through the PEO cylindrical channels of the annealed membrane but not across a non‐annealed one.     

Origin of electron mobility enhancement in (1 1 1)-oriented InGaAs channel metal-insulator-semiconductor field-effect-transistors

Electrical and physical characteristics of the Al₂O₃/InGaAs interfaces with (1 1 1)A and (1 0 0) orientations were investigated in an attempt to understand the origin of electron mobility enhancement in the (1 1 1)A-channel metal-insulator-semiconductor field-effect-transistor. The (1 1 1)A interface has less As atoms of high oxidation states as probed by X-ray photoelectron spectroscopy. The electrical measurements showed that energy distribution of the interface traps for the (1 1 1)A interface is shifted toward the conduction band as compared to that for the (1 0 0) interface. Laterally-compressed cross-section transmission electron microscopy images showed that the characteristic lengths of the interface roughness are different between the (1 1 1)A and (1 0 0) interfaces. The contributions of the Coulomb and roughness scattering mechanisms are discussed based on the experimental results.     

Clinical studies on vancomycin in the treatment of MRSA infection

We evaluated the effectiveness and safety of vancomycin (VCM) alone and in combination with beta-lactam antibiotics in the treatment of MRSA infections, and obtained the following results: 1. Effectiveness. (1) In cases of MRSA infections alone, the improvement rate was 71.4% (5/7 patients) with VCM alone and 77.8% (35/45) with VCM in combination with beta-lactam antibiotics. (2) In cases of polymicrobial infections, few cases were treated with VCM alone, but the improvement rate in combination use with beta-lactam antibiotics was 71.8% (28/39). 2. Bacteriological effect. (1) In cases of single infection with MRSA, the rate of bacterial eradication was 71.4% (5/7) with VCM alone and 68.2% (30/44) with VCM in combination with beta-lactam antibiotics. (2) In cases of polymicrobial infections, few cases were treated with VCM alone, but the rate of bacterial eradication in combination use with be ta-lactam antibiotics was 63.2% (24/38) against MRSA and 31.6% (12/38) against polymicrobial agents including MRSA. 3. Safety. Occurrences of adverse reactions and abnormal laboratory test values when VCM was used alone or when it is used in combination with another drug were about the same in these uses. As a whole, advance reactions were observed in 16 patients (9.5%). Main adverse reactions were whole body redness, drug eruption, and rash etc. Abnormal laboratory test values were observed mainly in hepatic functions, and renal functions. 4. VCM concentrations in blood was determined in 38 patients. Doses of 0.5 g and 1.0 g of VCM was administered by intravenous drip infusion over a period of 1 to 2 hours, and mean blood concentrations 1 to 2 hours after the completion of drip infusion were 25.4 micrograms/ml and 14.4 micrograms/ml, respectively. 5. Synergic effects between VCM and other antibiotics tested were observed in FIC index against all of the six MRSA strains isolated from six patients, and the clinical effects of improvement or better were obtained against five of them.     

Mammalian Polycomb group genes are categorized as a new type of early response gene induced by B-cell receptor cross-linking

Polycomb group (PcG) genes were initially described in Drosophila melanogaster as regulators of the homeobox gene. Four mammalian homologues, mel-18, bmi-1, M33 and rae-28, are analyzed in this study. They not only regulate mammalian homeotic genes by analogy with their Drosophila counterparts, but also have some influence on the growth and differentiation of B lymphocytes. Here we report that these four mammalian PcG genes are rapidly induced after antigen-receptor cross-linking in B cells. Thus we would like to propose that mammalian PcG genes can be categorized as a new type of immediate early gene.     

Sugar-Induced Chiral Orientation of Boronic-Acid-Appended Amphiphile Clusters Formed in the Dipalmitoylphosphatidylcholine (DPPC) Membrane

A boronic-acid-appended amphiphile bearing an azobenzene chromophore in the chain center ( 3 ) was synthesized. Although 3 could not form the membrane-like, ordered aggregate by itself, it formed a phase-separated aggregate in a dipalmitoylphosphatidylcholine (DPPC) matrix membrane. When saccharides were added, the boronic acid group reversibly formed the saccharide complexes, and 3 in the DPPC matrix membrane became CD-active with the appearance of exciton-coupling bands. Comparison of the saccharide absolute configuration with the CD intensity established that the saccharide possessing the OH group (as 3-OH, 4-OH, and 5-CH₂OH) in the same side as the cis-1,2-diol gives the strong CD band. Judging from the structure of 3 –saccharide complexes, these “same-side” OH groups can enjoy intermolecular hydrogen-bonding interactions, which eventually induce the chiral orientation of azobenzene chromophores. This is a novel membrane system useful to read out the information stored in the saccharide structure and to create novel membrane structures by added saccharides.     

Seven zinc-finger transcription factors are expressed sequentially during the development of anthers in petunia

BACKGROUND: Little is known about the value of heart rate variability in patients with symptomatic coronary artery disease with a preserved left ventricular function. We hypothesized that in these patients heart rate variability might be a helpful adjunct to conventional parameters to predict clinical events. METHODS: In a prospective 2-year follow-up study ambulatory electrocardiographic recordings were performed in 263 consecutive male patients (mean age 56+/-8 years) with stable angina pectoris and a mean left ventricular ejection fraction of 71%+/-12%. Clinical events consisted mainly of coronary events such as percutaneous transluminal angioplasty or coronary artery bypass graft operation. RESULTS: Low measures of standard deviation of normal R-R intervals, standard deviation of the mean R-R intervals of 5 minutes, and two spectral components of heart rate variability were found in patients who had had an event compared with patients with no event. Adjusted for severity of angina, the presence of a previous myocardial infarction, and the use of beta-blockers in a logistic regression model this relation remained statistically significant for SDNN. Healthy volunteers appeared to have the highest measures of heart rate variability. CONCLUSION: In patients with ischemic heart disease and normal or near normal ventricular function decreased heart rate variability is associated with adverse clinical events.