Electromagnetic wave radiated from an insulating spacer in gas insulated switchgear with partial discharge detection

As a means of diagnosing partial discharge (PD) signals propagate inside a Gas Insulated Switchgear (GIS), a study for the leakage of electromagnetic waves (EM-waves) emitted from the insulating spacer was implemented. The EM-waves leaking out from the solid insulator have the resonance frequencies depend on the spacing between adjacent bolts in the direction of the flange circumference, because the leakage portion is the equivalent of a slot antenna. In this paper, using an electromagnetic analysis model which has a simulated spacer on a concentrically-shaped GIS tank, the output characteristics of the EM-waves that leaked out from the slit were analyzed under various conditions such as the spacing between adjacent bolts, the width of the spacer, the dielectric constant of the spacer and the form of the flange. Also the actual measurement by the experimental equipment used to simulate the model was implemented for comparison with the analytical results. Consequently, the optimal specifications of the sensor and the measurement method used to achieve highly-sensitive detection for practical use were summarized and proposed as well as evaluating the effectiveness of the electromagnetic analysis model adopted in this paper.     

Monte Carlo criticality calculation under extreme condition

Autocorrelation and bias characteristics in the Monte Carlo criticality calculation have been examined for a certain type of extreme problems. Possibility is shown that the bias of the effective multiplication factor can become larger than ?0.1 in magnitude for population size as large as 10,000 starter particles per generation. This bias dramatically decreases if the number of starter particles per generation is large enough so that the noise propagation of a source distribution becomes linear. Furthermore, under this linearity, the bias correction is demonstrated to be an estimation problem of autocorrelation. Therefore, the linearity diagnosis of the noise propagation should be made available in the Monte Carlo criticality codes in public release in order to encompass analysis scenarios beyond normal circumstances.     

Effect of Risk Information Exposure on Consumers’ Responses to Foods with Insect Contamination

This study explores the impact that scientific information about insect contamination of food has on consumer perceptions. Participants (n = 320, Japanese consumers) were randomly assigned to 1 of 8 information‐type conditions: (1) information about insect type, (2) information about contamination processes, (3) information about the safety of contaminated food, (4, 5, 6) combinations of 2 of (1), (2), and (3) above, (7) all information, and (8) no‐information, and asked to rate their valuation, behavioral intention, and attitude toward food with insect contamination. Results demonstrated that some combinations of scientific information that include the safety of the contaminated food are effective to reduce consumers’ compulsive rejection of insect contamination in food, whereas the single presentation of information about insect type increases consumers’ explicit rejection of both the contaminated product and the manufacturer. These findings have implications for the coordination of risk communication strategies.     

Effect of “soft-electron” (low-energy electron) treatment on three stored-product insect pests

Developmental stages of three stored-product insect pests viz. Tribolium castaneum (Herbst), Plodia interpunctella (Hübner) and Callosobruchus chinensis (L.) were exposed to “soft electrons”, low-energy electrons. Soft electrons at an acceleration voltage of 170 kV effectively inactivated eggs, larvae and pupae of T. castaneum and P. interpunctella. The adults of T. castaneum and P. interpunctella were inactivated by treatment for 10 min (4.8 kGy) and 15 min (7.2 kGy), respectively. Soft electrons at 170 kV also inactivated the eggs of C. chinensis effectively. The adults of C. chinensis survived a 15 min exposure (7.2 kGy), but were inactivated having lost the ability to walk after a 5 min exposure (2.4 kGy). Soft electrons at 170 kV could not completely inactivate the larvae of C. chinensis inside beans, because the electrons with low penetration did not reach the larvae due to the shield of beans. The movement of T. castaneum larvae exposed to soft electrons was sluggish for several days, and then the larvae died with their hindguts emerged from their posterior ends 17 days after the treatment. DNA comet assay of cells of P. interpunctella larvae indicated that soft electrons at 170 kV damaged DNA in the larvae.     

Detection of tris(2,4-di-tert-butylphenyl)phosphite (Irgafos 168, antioxidant in plastics) and its oxide in commercial frozen vegetables

Two peaks, A and B, detected in chromatograms of commercial frozen vegetable extracts during analysis of organophosphorus pesticide residues by GC-FPD, were identified as tris(2,4-ditert-butylphenyl)phosphite (Irgafos 168) and Irgafos 168 oxide, respectively, from their mass spectra. Irgafos 168 is used as an antioxidant in plastics, and there has been no report of its detection in foods. We analyzed Irgafos 168 and its oxide in 38 samples of commercial frozen vegetables, and they were detected from 4 samples (0.02-0.80 microgram/g as total amount of Irgafos 168 and its oxide).     

A Unique Approach to Characterization of Sol‐Gel‐Derived Rare‐Earth‐Doped Oxyfluoride Glass‐Ceramics

Using the sol‐gel route Nd³⁺‐doped oxyfluoride glass‐ceramics were prepared. LiYF₄ and YF₃ crystals were deposited in the glass‐ceramics and their size, distribution, and amount ratio were varied by changing the compositions and heating temperatures. The incorporation of Nd³⁺ ions into both the fluoride crystals was confirmed by the high‐resolution elemental mapping of the glass‐ceramics. The incorporated Nd³⁺ ions showed up and down conversion photoluminescence whose properties were obviously different among the samples. The preliminary site analysis for Nd³⁺ ions was carried out using a unique approach associated with the Prony series approximation. Finally, the approach was found to be useful for the analysis of materials that are structurally complicating.     

Solar assisted method for recovery of bitumen from oil sand

A novel concept for the recovery of bitumen from oil sands in a natural gas limited environment with and without CO₂ constraints is presented. We suggest a feasible method for the recovery of unconventional oil in an environmentally friendly and sustainable way that has the potential of eliminating the need of natural gas as a process fuel. The proposed concept involves mid temperature steam generation for stimulating an oil sand formation. The steam is generated by utilizing solar radiation. The method uses the thermal mass of the oil sand formation to allow for cyclic steam injection during solar availability while still yielding continuous bitumen recovery. Feasibility assessments of the concept from both a thermodynamic and financial point of view are presented for a scenario of development in the Athabasca region in Alberta, Canada.     

All solid-state sheet battery using lithium inorganic solid electrolyte, thio-LISICON

All solid-state sheet lithium battery was developed using inorganic solid electrolyte, thio-LISICON (Li_3.25Ge_0.25P_0.75S₄), Li–Al anode, and Mo₆S₈ cathode materials, and the sheet manufacturing process was established. The new sheet-configuration was consisted of the cathode with the grid of current collector, electrolyte sheet with or without mechanical support, and aluminum/lithium composite sheet anode. A sheet battery with a dimension of 30 mm × 30 mm showed good charge–discharge characteristics without any capacity fading at a current of 0.1 mA.     

Investigation of UV-A light irradiation on tomato fruit injury during storage

We investigated the effect of UV-A light (wavelength 315 to 400 nm) irradiation during storage on tomato fruit injury. Mature green tomato fruit (cv. House Momotaro) were exposed to UV-A at doses of 0.02, 0.5, and 2 mW x cm(-2) throughout storage at 25 degrees C. The physiological disorders, fruit ripening, superoxide dismutase (SOD) activity, and increases in fruit temperature were evaluated. All UV-A-irradiated and nonirradiated tomatoes developed a full red color at the same time (2 weeks). Irradiated fruit ripened normally, and exposure of tomato fruits to UV-A did not lead to the discoloration of ripe tomato fruit at any dosage. The fruit temperature did not increase in response to various UV-A light doses and exposure times, and none of the UV-irradiated fruits showed physiological disorders (dull skin blemish, pitting). The SOD activity of UV-A-irradiated fruit exposed to the various UV-A doses did not significantly (P = 0.05) differ from that of fruit stored in dark conditions. The SOD results imply that UV-A light might not induce reactive oxygen species in UV-A-irradiated fruit.