Reaction zone formed during diffusion bonding of TiNi to Ti6Al4V using Ni/Ti nanolayers

This study investigated the interfacial structure of solid state diffusion bonding of TiNi to Ti6Al4V using reactive Ni/Ti multilayer thin films. The TiNi and Ti6Al4V surfaces were modified by sputtering, by deposition of alternated Ni and Ti nanolayers, to increase the diffusivity at the interface. Bonding experiments were performed at 750, 800 and 900 °C at a pressure of 10 MPa with a dwell time of 60 min. The reaction zone was characterized by high-resolution scanning and transmission electron microscopy. Joints free from porosity and cracks were produced with Ni/Ti reactive multilayer thin films. Several phases formed at the interface, ensuring the bonding of these alloys. The reaction zone was constituted by columnar grains of Ti₂Ni and AlNi₂Ti, close to the Ti6Al4V base material, and by alternate layers of Ti₂Ni and TiNi equiaxed grains. The grain size decreased from Ti6Al4V to TiNi base materials. Nanometric grains were observed in the layers closest to the TiNi base material.     

Argon Implantation in Tetrahedral Amorphous Carbon Deposited by Filtered Cathodic Vacuum Arc

The implantation of argon in tetrahedral amorphous carbon (ta-C), deposited by the filtered cathodic vacuum arc technique and concurrently bombarded with argon ions (Ar⁺), is investigated in this study. The ta-C films were prepared with a 5-ms DC-pulsed arc, a current of 190 A, and a frequency of 3 Hz, and they were deposited on a ground substrate holder. The argon atoms were implanted into the film by simultaneously bombarding the films with a beam of Ar⁺ in the 0-180 eV energy range. The concentration of argon, determined by Rutherford backscattering spectroscopy, was investigated as a function of the Ar⁺ energy. Raman scattering spectroscopy was used to investigate the structure of the films. The stress of the films depends on the Ar⁺ energy and reduces significantly as a function of the annealing temperature. A study of argon effusion, ranging from room temperature up to 1000 °C, shows that the argon atoms evolve from the films at different temperatures depending on the Ar⁺ energy. Scanning electron microscopy revealed the formation of bubbles after argon effusion. It was observed that the structural transformations that promote the relaxation of the carbon matrix and the argon effusion are different from each other.     

Transfer of Salmonella Enteritidis to four types of surfaces after cleaning procedures and cross-contamination to tomatoes

The objectives of the present study were to evaluate the spread of Salmonella Enteritidis to different cutting boards (wood, triclosan-treated plastic, glass, and stainless steel) from contaminated poultry skin (5 log CFU/g) and then to tomatoes and to analyze the effect of different protocols used to clean these surfaces to control contamination. The following procedures were simulated: (1) no cleaning after handling contaminated poultry skin; (2) rinsing in running water; (3) cleaning with dish soap and mechanical scrubbing; and (4) cleaning with dish soap and mechanical scrubbing, followed by disinfection with hypochlorite. The pathogen was recovered from all surfaces following procedure 1, with counts ranging from 1.90 to 2.80 log, as well as from the tomatoes handled on it. Reduced numbers of S. Enteritidis were recovered using the other procedures, both from the surfaces and from the tomatoes. Counts were undetectable after procedure 4. From all surfaces evaluated, wood was the most difficult to clean, and stainless steel was the easiest. The use of hypochlorite as a disinfecting agent helped to reduce cross-contamination.     

Moisture and temperature degradation of double cantilever beam adhesive joints

In this work, the double cantilever beam (DCB) test is analysed in order to evaluate the combined effect of temperature and moisture on the mode I fracture toughness of adhesives used in the automotive industry. Very few studies focus on the combined effect of temperature and moisture on the mechanical behaviour of adhesive joints. To the authors’ knowledge, the simultaneous effect of these conditions on the fracture toughness of adhesive joints has never been determined. Specimens using two different adhesives for the automotive industry were subjected to two different ageing environments (immersion in distilled water and under 75% of relative humidity). Once they were fully degraded, they were tested at three different temperatures (?40, 23 and 80 °C), which covers the range of temperature an adhesive for the automotive industry is required to withstand. The aim is to improve the long term mechanical behaviour prediction of adhesive joints. The DCB substrates were made of a high strength aluminium alloy to avoid plastic deformation during test. The substrates received a phosphoric acid anodisation to improve their long term adhesion to the adhesive. Results show that even though a phosphoric acid anodization was applied to the adherends, when the aged specimens were tested at room temperature and at 80 °C, they suffered interfacial rupture. At ?40 °C, however, cohesive rupture was observed and the fracture toughness of the aged specimens was higher.     

A distributed data storage protocol for heterogeneous wireless sensor networks with mobile sinks

This paper presents ProFlex, a distributed data storage protocol for large-scale Heterogeneous Wireless Sensor Networks (HWSNs) with mobile sinks. ProFlex guarantees robustness in data collection by intelligently managing data replication among selected storage nodes in the network. Contrarily to related protocols in the literature, ProFlex considers the resource constraints of sensor nodes and constructs multiple data replication structures, which are managed by more powerful nodes. Additionally, ProFlex takes advantage of the higher communication range of such powerful nodes and uses the long-range links to improve data distribution by storage nodes. When compared with related protocols, we show through simulation that Proflex has an acceptable performance under message loss scenarios, decreases the overhead of transmitted messages, and decreases the occurrence of the energy hole problem. Moreover, we propose an improvement that allows the protocol to leverage the inherent data correlation and redundancy of wireless sensor networks in order to decrease even further the protocol’s overhead without affecting the quality of the data distribution by storage nodes.     

MCDA: a constructivist approach to the management of human resources at a governmental agency

In the context of a concern with a self sustaining system for the management of Human Resources, those responsible for the Coordination of Human Resources at the Governmental Agency 'Secretaria de Administração do Estado de Santa Catarina' (SEA) have decided to use a Constructivist Multicriteria Decision Aid Approach (MCDA) to help them identify the most convenient courses of action for the achievement of the proposed goals. The present paper shows both the development of an MCDA model and the process used for action generation and assessment.     

Adsorption of mercury cation on chemically modified clay

A montmorillonite clay (M) sample from the Amazon region, Brazil, was intercalated with pyridine (Py), dimethyl sulfoxide (DS) and 3-aminopropyltriethoxysilane (APS). The chemically modified montmorillonite (M_P/APS) sample showed modification of its physical-chemical properties including: specific area 41.39 m² g⁻¹ (M) to 198.45 m² g⁻¹ (M_P/APS). Solid-state ²⁹Si CPMAS/NMR of the silylated montmorillonite samples showed Q² and Q³ signals as well as T² and T³ signals. The appearance of T² and T³ signals can be attributed to the grafting of APS to the interlayer surface silanol groups. The natural and modified clays were used for mercury cation adsorption from aqueous solutions at room temperature and pH 3.0. The energetic effects (Δ_intH°, Δ_intG° and Δ_intS°) caused by mercury cation adsorption were determined through calorimetric titrations.     

Maternal Fluoride Exposure Exerts Different Toxicity Patterns in Parotid and Submandibular Glands of Offspring Rats

There is currently a controversial and heated debate about the safety and ethical aspects of fluoride (F) used for human consumption. Thus, this study assessed the effects of prenatal and postnatal F exposure of rats on the salivary glands of their offspring. Pregnant rats were exposed to 0, 10, or 50 mg F/L from the drinking water, from the first day of gestation until offspring weaning (42 days). The offspring rats were euthanized for the collection of the parotid (PA) and submandibular (SM) glands, to assess the oxidative biochemistry and to perform morphometric and immunohistochemical analyses. F exposure was associated with a decrease in the antioxidant competence of PA in the 10 mg F/L group, contrasting with the increase observed in the 50 mg F/L group. On the other hand, the antioxidant competence of the SM glands was decreased at both concentrations. Moreover, both 10 and 50 mg F/L groups showed lower anti-α-smooth muscle actin immunostaining area in SM, while exposure to 50 mg F/L was associated with changes in gland morphometry by increasing the duct area in both glands. These findings demonstrate a greater susceptibility of the SM glands of the offspring to F at high concentration in comparison to PA, reinforcing the need to adhere to the optimum F levels recommended by the regulatory agencies. Such findings must be interpreted with caution, especially considering their translational meaning.     

Roles of Calcium Signaling in Gene Expression and Photosynthetic Acclimatization of Solanum lycopersicum Micro-Tom (MT) after Mechanical Damage

A momentary increase in cytoplasmic Ca²⁺ generates an oscillation responsible for the activation of proteins, such as calmodulin and kinases, which interact with reactive oxygen species (ROS) for the transmission of a stress signal. This study investigated the influence of variations in calcium concentrations on plant defense signaling and photosynthetic acclimatization after mechanical damage. Solanum lycopersicum Micro-Tom was grown with 0, 2 and 4 mM Ca²⁺, with and without mechanical damage. The expression of stress genes was evaluated, along with levels of antioxidant enzymes, hydrogen peroxide, lipid peroxidation, histochemistry, photosynthesis and dry mass of organs. The ROS production generated by mechanical damage was further enhanced by calcium-free conditions due to the inactivation of the oxygen evolution complex, contributing to an increase in reactive species. The results indicated that ROS affected mechanical damage signaling because calcium-free plants exhibited high levels of H₂O₂ and enhanced expression of kinase and RBOH1 genes, necessary conditions for an efficient response to stress. We conclude that the plants without calcium supply recognized mechanical damage but did not survive. The highest expression of the RBOH1 gene and the accumulation of H₂O₂ in these plants signaled cell death. Plants grown in the presence of calcium showed higher expression of SlCaM2 and control of H₂O₂ concentration, thus overcoming the stress caused by mechanical damage, with photosynthetic acclimatization and without damage to dry mass production.