Effects of a single dose of N-Acetyl-5-methoxytryptamine (Melatonin) and resistance exercise on the growth hormone/IGF-1 axis in young males and females

Melatonin and resistance exercise alone have been shown to increase the levels of growth hormone (GH). The purpose of this study was to determine the effects of ingestion of a single dose of melatonin and heavy resistance exercise on serum GH, somatostatin (SST), and other hormones of the GH/insulin-like growth factor 1 (IGF-1) axis. Physically active males (n = 30) and females (n = 30) were randomly assigned to ingest either a melatonin supplement at 0.5 mg or 5.0 mg, or 1.0 mg of dextrose placebo. After a baseline blood sample, participants ingested the supplement and underwent blood sampling every 15 min for 60 min, at which point they underwent a single bout of resistance exercise with the leg press for 7 sets of 7 reps at 85% 1-RM. After exercise, participants provided additional blood samples every 15 min for a total of 120 min. Serum free GH, SST, IGF-1, IGFBP-1, and IGFBP-3 were determined with ELISA. Data were evaluated as the peak pre- and post-exercise values subtracted from baseline and the delta values analyzed with separate three-way ANOVA (p < 0.05). In males, when compared to placebo, 5.0 mg melatonin caused GH to increase (p = 0.017) and SST to decrease prior to exercise (p = 0.031), whereas both 0.5 and 5.0 mg melatonin were greater than placebo after exercise (p = 0.045) and less than placebo for SST. No significant differences occurred for IGF-1; however, males were shown to have higher levels of IGFBP-1 independent of supplementation (p = 0.004). The 5.0 mg melatonin dose resulted in higher IGFBP-3 in males (p = 0.017). In conclusion, for males 5.0 mg melatonin appears to increase serum GH while concomitantly lowering SST levels; however, when combined with resistance exercise both melatonin doses positively impacts GH levels in a manner not entirely dependent on SST.     

Airborne differences in odors emitted byRattus norvegicus in response to reward and nonreward

To test the hypothesis that rats (Rattus norvegicus) emit airborne, differential odors in response to reward and nonreward, donor rats received random sequences of rewarded and nonrewarded placements in small compartments and an airstream transported odors from these compartments to test rats in a separate chamber. When donors remained in the compartments during, or were removed just prior to, air transport, test rats utilized transported odors as discriminative cues signaling their own reward and nonreward for a lever-press response. When the airstream was passed through a clean compartment containing paper flooring extracted from donor compartments, test rats were not able to discriminate. Test trials to assess for control by food odors suggest that donor-produced odors, rather than food odors per se, provided the discriminative signals for test rats. Results confirm the existence of somewhat volatile, although apparently stable, odors emitted in response to reward and nonreward, and implicate a differential in amount and/or type of odor produced by donors to these two events as the source of discriminative control.     

The Pigmentation of Acrylic Resins*

Acrylic resins may be divided into two main categories—solvent-bome and water-borne systems—and these have been further subdivided into two groups, namely solutions and dispersions. Problems associated with the pigmentation of acrylic resins are discussed, and methods of assessing the wetting properties of the system are mentioned. The use of wetting and dispersing agents is examined, and the concept of the hydrophilic-lyophilic balance (HLB) value is investigated in this context. Pigmentation is one important factor that must be considered in assessing the exterior durability of acrylic resins, certain types of which are ideal media for metallic finishes because of their excellent polishing and weathering properties. The phenomenon of geometric metamerism associated with metallic finishes is discussed.     

An energy model for the optimal design of linear continuum structures

An analytical model is presented for the optimal design of linearly elastic continuum structures. To facilitate the expression of the combined analysis and design problem in general form, a basis is introduced covering a general set of energy invariants. Both internal (strain) energy and the expression of generalized cost are represented conveniently in terms of this basis, and as a result the optimality conditions for the design problem have a particularly simple form. Present developments comprise a reinterpretation and an extension of existing models where the design variable is the material modulus tensor, and where cost is represented in a general form. The conventional potential energy statement for linear continuum elastostatics is restated in the form of an isoperimetric problem, as a preliminary step. This interpretation of the mechanics is then incorporated in a max-min formulation applicable for the general design of linear continuum structures. To exemplify its application, the model is interpreted as it would apply for certain materials with particular geometric structure, e.g. crystalline forms. Also problems treated earlier where optimal material properties are predicted for the case where unit cost is proportional to the trace of the modulus tensor are identified as examples within the generalized formulation. The application of a recently developed technique to predict optimal black-white structures, i.e. designs having sharp topological features, is considered in the setting of the present generalized model.     

Podcasting in education: Are students as ready and eager as we think they are?

Instructors in higher education are disseminating instructional content via podcasting, as many rally behind the technology’s potential benefits. Others have expressed concern about the risks of deleterious effects that might accompany the adoption of podcasting, such as lower class attendance. Yet, relatively few studies have investigated students’ perceptions of podcasting for educational purposes, especially in relation to different podcasting forms: repetitive and supplemental. The present study explored students’ readiness and attitudes towards these two forms of podcasting to provide fundamental information for future researchers and educators. The results indicated that students may not be as ready or eager to use podcasting for repetitive or supplemental educational purposes as much as we think they are, but they could be persuaded.     

Thermal and cardiovascular strain imposed by motorcycle protective clothing under Australian summer conditions

Motorcycle protective clothing can be uncomfortably hot during summer, and this experiment was designed to evaluate the physiological significance of that burden. Twelve males participated in four, 90-min trials (cycling 30 W) across three environments (25, 30, 35 °C [all 40% relative humidity]). Clothing was modified between full and minimal injury protection. Both ensembles were tested at 25 °C, with only the more protective ensemble investigated at 30 and 35 °C. At 35 °C, auditory canal temperature rose at 0.02 °C min^?1 (SD 0.005), deviating from all other trials (p < 0.05). The thresholds for moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 min (SD 20.6) and 180 min (SD 33.0), respectively. Profound hyperthermia might eventuate in ~10 h at 30 °C, but should not occur at 25 °C. These outcomes demonstrate a need to enhance the heat dissipation capabilities of motorcycle clothing designed for summer use in hot climates, but without compromising impact protection.

Practitioner’s Summary:

Motorcycle protective clothing can be uncomfortably hot during summer. This experiment was designed to evaluate the physiological significance of this burden across climatic states. In the heat, moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 and 180 min, respectively.     

Internet robots: a new robotics niche

Web robots are a concept that has captured the interest of researchers and developers. Their potential is being investigated at the University of Western Australia, where a six-axis robot has been made teleoperable over the World Wide Web. The site has been active since September 1994 and the robot has also been exhibited at the Australian National Science and Technology Centre in Canberra. Someone considering offering services with this technology will be interested in which groups of people find it attractive, the level of commitment that operators show, and how the robot users behave. These questions are addressed in the article with some demographic data on operators, an analysis of how long they remain interested, and an examination of how long they will wait to access the service. The user interface affects operator behavior, so some interface variations and their effect on operator actions are considered. The opportunities presented, likely application areas, and the potential for generating an income are examined     

Physical Maltreatment Victim to Antisocial Child: Evidence of an Environmentally Mediated Process.

The well-documented finding that child physical maltreatment predicts later antisocial behavior has at least 2 explanations: (a) Physical maltreatment causes antisocial behavior, and (b) genetic factors transmitted from parents to children influence the likelihood that parents will be abusive and that children will engage in antisocial behavior. The authors tested these hypotheses in the representative Environmental-Risk cohort of 1,116 twin pairs and their families, who were assessed when the twins were 5 and 7 years old. Mothers reported on children's experience of physical maltreatment, and mothers and teachers reported on children's antisocial behavior. The findings support the hypothesis that physical maltreatment plays a causal role in the development of children's antisocial behavior and that preventing maltreatment can prevent its violent sequelae. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Automated surgical screwdriver: automated screw placement

The use of power screwdrivers and drills for tapping and screw insertion in surgery is becoming more common. It has been established from clinical observations that the use of a small air drill for inserting self-tapping screws provides improved coaxial alignment and precision, and that the drill should be stopped before the screw head is completely seated on the plate, presumably to reduce the risk of over-tightening. The risk of overrun and over-tightening during tapping and screw insertion is increased with the use of power tools. Prevention of over-tightening is dependent upon when the surgeon detects the onset of tightening, both visually and from the feel of the rapid increase in torque. If detection is too late, then over-tightening or stripping can occur. This study is concerned with using a mechatronic screwdriver to control the tapping depth and to prevent the over-tightening of screws. The effects of various parameters upon the torque profile during tapping and screw insertion have been investigated in synthetic bone and sheep tibia. An automated system is proposed for preventing over-tightening of pre-tapped and self-tapping screws when attaching a surgical plate to a sheep tibia in vitro. The system was used to attach a plate to a sheep tibia using self-tapping screws. The mean torque of the screws inserted using the automated system was 35 per cent of the stripping torque.