Langmuir-Blodgett deposited cadmium gate inverted InP-GaInAs modulation-doped field-effect transistors

We report on the Langmuir-Blodgett film deposition and plasma etching of cadmium distearate on n-Gao.47Ino.53As to form a high-barrier-height Schottky barrier. Using this technique to form the gate electrode, we fabricated a 1?m-gate-length inverted InP-GalnAs modulation-doped field-effect transistor (MODFET) with an extrinsic transconductance of 170mS/mm and a cutoff frequencyfT of 19 GHz.     

CCD型束流截面探测器

CCD型束流截面探测器的主要特点是使用电荷耦合器件做传感器,用束流同步光中的可见光成份做为信号源。该探测器同时具有模拟量和数字量两种输出,工作周期短,速度高,不影响束团粒子寿命,在电子储存环物理运行中,是一种有效的探测设备。     

Quantum and Classical Correlations of Spatial and Spin Degrees of Freedom in Quantum Rings

A one-dimensional mesoscopic ring with one input and two output leads acts as a spintronic beam splitter. The spatial degree of freedom, i.e., the presence of two different possible output channels, gets intertwined with the spin direction as a consequence of quantum interference and spin-orbit interaction. We investigate this kind of spatial-spin correlation, and show that the output density operator contains no quantum entanglement in the important special case when the device polarizes a perfectly random input spin state. However, the correlations are in general not purely classical, we also present specific input states with maximal spatial-spin entanglement after the ring.     

The effect of doubly tapered strut morphology on the plastic yield surface of cellular materials

Although the literature on the mechanics of cellular materials is vast, there is no theoretical model to account for the effects of axial yielding of struts aligned to the applied loading direction on the plastic yield surface under multiaxial loading conditions. An anisotropic hexagonal model having tapered strut morphology is developed to show these effects on the plastic yield surface under multiaxial tensile loading condition. This model covers several types of cellular structure such as two-dimensional (2D) hexagonal and square cellular materials, and three-dimensional (3D) hexagonal and rhombic cellular materials of rod-like columnar structure. A tetrahedral element with tapered strut morphology is also used for a foam model to illustrate these effects on the yield surface under axisymmetric loading condition. Plastic collapse due to bending moment in the inclined struts is a dominant mode. However, under multiaxial tensile loading, the collapse due to axial yielding of struts parallel to the loading direction is found to be an important mode. The shape of plastic yield surface was found to depend not only on relative density but also on the strut morphology.     

Synthesis and properties of organotin epoxy polymers from tri-n-butyltin esters of ω - amino acids

Structure-property relationships in a series of thermoset organotin polymers have been investigated. The tri-n-butyltin esters of glycine, 4-aminobutanoic, 6-aminohexanoic, and 11-aminoundecanoic acids were synthesized and reacted with diepoxides to prepare prepolymers carrying epoxide end groups. The prepolymers were crosslinked by diethylenetriamine or metaphenylenediamine. Similar epoxy network polymers were prepared directly from the tributyltin ester of 3,5-diaminobenzoic acid which was also synthesized. The strength, moduli, toughness, glass transition and dynamic mechanical response of the polymers were investigated, and correlated with structural changes introduced in the network. The results establish the utility of the adopted synthesis schemes in exercising considerable control over the bulk polymer properties, and consequently, in modifying the controlled release of organotin groups from the crosslinked network.     

Synthesis and characterisation of copolyesters from poly(ethylene terephthalate) and poly(hexamethylene terephthalate)

Copolyesters containing poly(ethylene terephthalate) and poly(hexamethylene terephthalate) (PHT) were prepared by a melt condensation reaction. The copolymers were characterised by infrared spectroscopy and intrinsic viscosity measurements. The density of the copolyesters decreased with increasing percentage of PHT segments in the backbone. Glass transition temperatures (T_g). melting points (T_m) and crystallisation temperatures (T_c) were determined by differential scanning calorimetry. An increase in the percentage of PHT resulted in decrease in T_g, T_m and T_c. The as-prepared copolyesters were crystalline in nature and no exotherm indicative of cold crystallisation was observed. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in a nitrogen atmosphere. An increase in percentage of PHT resulted in a decrease in initial decomposition temperature. The rate of crystallisation of the copolymers was studied by small angle light scattering. An increase in percentage of PHT resulted in an increase in the rate of crystallisation.     

Control of free-radical emulsion polymerization of methyl methacrylate by oxygen injection. II. Experimental study

Oxygen injection has been proposed and experimentally demonstrated as an effective control measure for limiting the rate of heat release and altering the rate of polymerization in emulsion processes. A detailed mathematical model has been previously developed to describe the system behavior with and without oxygen injection. A simple lab scale apparatus was constructed and run extensively. Only trace quantities of oxygen are needed to inhibit the reaction completely. The facile response makes this method attractive for fast temperature control. However, because of the rapid penetration of dissolved oxygen into the polymer particles, growing radical chains are terminated prematurely, lowering product molecular weights. To minimize this detrimental effect, pulsed oxygen control is used and extensive experimental work was performed to determine the effects of controller set points on molecular weight. Moderate oxygen flows and moderate set point temperatures are found to give the optimal response without significant lowering of the final molecular weight. Injected quantities agree well with the order-of-magnitude sparging calculations needed to completely stop initiation. However, complete agreement between model simulations and experimental results was not reached due to an unmeasured loss of monomer from the reactor. Chain transfer to monomer is found to be important in modeling the polymer molecular weight. It has, however, a negligible effect on the reaction rate.     

Non-deterministic exponential time has two-prover interactive protocols

We determine the exact power of two-prover interactive proof systems introduced by Ben-Or, Goldwasser, Kilian, and Wigderson (1988). In this system, two all-powerful noncommunicating provers convince a randomizing polynomial time verifier in polynomial time that the inputx belongs to the languageL. We show that the class of languages having tow-prover interactive proof systems is nondeterministic exponential time.We also show that to prove membership in languages inEXP, the honest provers need the power ofEXP only.The first part of the proof of the main result extends recent techniques of polynomial extrapolation used in the single prover case by Lund, Fortnow, Karloff, Nisan, and Shamir.The second part is averification scheme for multilinearity of a function in several variables held by an oracle and can be viewed as an independent result onprogram verification. Its proof rests on combinatorial techniques employing a simple isoperimetric inequality for certain graphs: