Interaction between MoO3 and metals Te, Cd, Sb

Eighteen compositions of MoO₃-Te at 800 °C and seven of each of MoO₃-Cd (at 500 °C) and MoO₃-Sb (at 600 °C) were heat treated in vacuum-sealed quartz ampules. The phases of the heat-treated compositions were analyzed using x-ray diffraction (XRD) patterns. The interactions in the three systems are summarized. Three phases in equilibrium are (1) in the MnO₃-Te system at 800 °C, Te, Mo₄O₁₁, TeMo₄O₁₃—(0<x_{MoO 3}<0 889) and MoO₃, Mo₄O₁₁, TeMo₄O₁₃—(0.889<x_{MoO 3}<1); (2) in the MoO₃_Cd system at 500 °C, Cd, MoO₂, CdMoO₄—(0<x_{MoO 3}<0.6667) and MoO₃, MoO₂, CdMoO₄—(0.6667<x_{MoO 3}<1); and (3) in the MoO₃-Sb system at 600 °C, Sb, MoO₂, Sb₄Mo₁₀O₃₁—(0<x_{MoO 3}<0.734) and MoO₃+MoO₂+Sb₄Mo₁₀O₃₁ (0.734<x_{MoO 3}<1). The results lead to construction of ternary phase diagrams: Te-MoO₃-TeMo₄O₁₃, Cd-MoO₃-CdMoO₄, and Sb-MoO₃-Sb₄Mo₁₀O₃₁.     

Analytical, numerical and experimental investigations of transverse fracture propagation from horizontal wells

This paper presents results of a comprehensive study involving analytical, numerical and experimental investigations into transverse fracture propagation from horizontal wells. The propagation of transverse hydraulic fractures from horizontal wells is simulated and investigated in the laboratory using carefully designed experimental setups. Closed-form analytical theories for Mode I (opening) stress intensity factors for idealized fracture geometries are reviewed, and a boundary element-based model is used herein to investigate non-planar propagation of fractures. Using the mixed mode fracture propagation criterion of the model, a reasonable agreement is found with respect to fracture geometry, net fracture pressures and fracture propagation paths between the modeled fractures and the laboratory tested fractures. These results suggest that the propagation of multiple fractures requires higher net pressures than a single fracture, the underlying reason of which is theoretically justified on the basis of local stress distribution.     

Springback analysis of thin rectangular bars of non-linear work-hardening materials under torsional loading

A theoretical analysis of the springback of narrow rectangular strips of non-linear work-hardening material under torsional loading has been carried out. This theoretical analysis is supported by experimental results for rectangular mild steel strips of different thicknesses and lengths. Finally an analytical generalized expression relating angle of twist to twisting moment and residual angle of twist per unit length for rectangular strips under plastic torsion is obtained in non-dimensionalized form. A comparison between the results obtained for bars of non- linear and linear work-hardening materials loaded under torsion is also made.     

Using bald eagles to indicate the health of the Great Lakes' environment

The bald eagle (Haliaeetus leucocephalus) is one of the most studied birds of North America, and a great amount of natural life‐history information, including the response of various stressors on the eagles' ability to reproduce, are well known. In Michigan, the eagle has been chosen to track the trends of bioaccumulative compounds of concern across watersheds in the state. The state has been divided into major watersheds, and 20% of these are surveyed each year. A control area in northern Minnesota, Voyageurs National Park, is also sampled annually. We report here on the methods used, the preliminary results of the 1999 field season, and how differences in mercury concentrations varied over a 10‐year period. Mercury in feathers of nestling eagles declined over time only in Lakes Michigan and Huron, but have not decreased among other subpopulations in Michigan. Concentrations of polychlorinated biphenyls (PCBs) and 4,4′‐DDE in blood plasma from nestling eagles have declined over time for most subpopulations; however, they remain greater for breeding areas associated with the Great Lakes' food web. Sea eagles of the genus Haliaeetus are a good sentinel species to track trends in bioaccumulative compounds in aquatic systems.     

Properties of Carbopol Solutions as Models for Yield-Stress Fluids

ABSTRACT: The effect of pH on the non-Newtonian viscosity (η)of aqueous Carbopol 940 solutions is presented with high resolution (pH increments about 0.4) between pH = 2.8 and 12.7. Aqueous NaOH was used to adjust pH of 1.48 wt % Carbopol solutions. A Contraves viscometer was used to measure steady-flow shear stress at known shear rate (γ) over the range γ= 8 to 195 s⁻¹. Yield stresses and shear-thinning η(γ) were observed. Data were fitted with a Herschel-Bulkley model, whose parameters (including yield stress) were expressed as functions of pH. Comparisons were made of η(γ) to the dynamic viscometric properties η'(ω) and η*(ω) for comparable ranges of γ and frequency (ω): A fairly close match was found between η and η* but η«η'. pH dependence included previously unreported extrema of h(pH) in the range of pH = 6.2 to 6.6. Because of sensitive control of rheological properties with pH, Carbopol solutions can be used to mimic a great range of shear-thinning and yield-stress behavior that should make them useful for model studies directed toward process and equipment design and evaluation.     

TMAOase Activity of European Hake (Merluccius merluccius) Organs: Influence of Biological Condition and Season

ABSTRACT: Trimethylamine N-oxide demethylase (TMAOase) activity of several internal organs of hake were studied for 2 consecutive y. The correlation between enzymatic activity and season of year, sex, weight, and length were analyzed. While kidney and spleen showed the highest activities, liver, heart, bile, and gall bladder activities were much lower, and in some cases they were below the detection limit. A correlation between TMAOase activity of kidney and season was found. During winter and spring (February to May), the months matching the spawning peak, high activities were detected, while in summer months the activity level was lower. TMAOase activity in the rest of the organs did not seem to have a seasonal influence. Keywords: TMAOase, season, biological condition, hake, soluble protein     

Performance and modeling of advanced Ti:LiNbO3 digitaloptical switches

High-performance Y-branch digital optical switches realized in Ti:LiNbO₃ are presented. Their switching response functions have been optimized in terms of switch voltage and crosstalk ratio. The optimization is based on analyzing different types of waveguide shaping and switching arrangements using coupled mode theory and computer simulations. Excellent switching characteristics are achieved with devices exploiting a specially shaped waveguide branch in a dilated switch arrangement. Demonstrated performances include switching voltage as low as 9 V with crosstalk suppression better than 45 dB and fiber-to-fiber losses as low as 4 dB. Polarization independence with crosstalk suppression better than 40 dB over a 1520- to 1570-nm wavelength range is achieved for any applied switch voltage greater than 18 V. These optimized digital optical switches have further demonstrated the capability to reshape electrical input signals at switching rates of several hundred megahertz     

Data-dependent k/sub n/-NN and kernel estimators consistent for arbitrary processes

Let X/sub 1/, X/sub 2/,... be an arbitrary random process taking values in a totally bounded subset of a separable metric space. Associated with X/sub i/ we observe Y/sub i/ drawn from an unknown conditional distribution F(y|X/sub i/=x) with continuous regression function m(x)=E[Y|X=x]. The problem of interest is to estimate Y/sub n/ based on X/sub n/ and the data {(X/sub i/, Y/sub i/)}/sub i=1//sup n-1/. We construct appropriate data-dependent nearest neighbor and kernel estimators and show, with a very elementary proof, that these are consistent for every process X/sub 1/, X/sub 2/,.     

Portable system for data acquisition and transmission based on handheld PC technology

A portable system is developed to monitor physical activity by acquiring and storing data from body-mounted sensors; a handheld PC is used for managing data acquisition and storage, including radio-transmission to a remote host. An application related to the use of a gyro-accelerometric sensor for determining walking distance is discussed.