Toughening mechanism for a rubber-toughened epoxy resin with rubber/matrix interfacial modification

For a rubber-toughened piperidine-DGEBA epoxy resin, the interface between the rubber particle and the epoxy resin matrix was modified by an epoxide end-capped carboxyl terminated butadiene and acrylonitrile random copolymer (CTBN). The end-capping epoxides used were a rigid diglycidyl ether of bisphenol-A (Epon 828), a short-chain flexible diglycidyl ether of propylene glycol (DER 736), and a long-chain flexible diglycidyl ether of propylene glycol (DER 732). The microstructures and the fracture behaviour of these rubber-modified epoxy resins were studied by transmission electron microscopy and scanning electron microscopy. Their thermal and mechanical properties were also investigated. In the rubber-modified epoxy resins, if the added CTBNs were end-capped by a flexible diglycidyl ether of propylene glycol (DER 732 or DER 736) before curing, the interfacial zone of the undeformed rubber particle, the degree of cavitation of the cavitated rubber particle on the fracture surface and the fracture energy of the toughened epoxy resin were all significantly increased. The toughening mechanism based on cavitation and localized shear yielding was considered and a mechanism for the interaction between cavitation and localized shear yielding that accounts for all the observed characteristics is proposed.     

Netted radar sensitivity and ambiguity

The performance of netted radar is evaluated in terms of a netted version of the radar equation and the ambiguity function. A software simulation has been developed to allow assessment of netted radar sensitivity and ambiguity properties in both two-and three-dimensional space. Simulation results demonstrate that coherent netted radar sensitivity depends not only on the radar parameters, but also on the numbers, locations and specification of transmit and receive nodes. The netted radar ambiguity function is affected by a combination of many factors. In addition to those that determine the form of the monostatic ambiguity function, the locations of transmit and receive nodes as well as the position and velocity of the target all are shown to play an important role in evaluating system performance. As a result of these dependencies, it is shown that there is severe degradation of range and Doppler resolution when a target crosses sufficiently close to a transmit-receive baseline.     

Statistical estimation of average power dissipation usingnonparametric techniques

In this paper, we present a new statistical technique for estimation of average power dissipation in digital circuits. The present parametric statistical technique estimates the average power based on the assumption that the power distribution can be characterized by a preassumed function. Large error can incur when the assumption is not met. On the other hand, the existing nonparametric technique, although accurate, is too conservative and requires a large sample size in order to achieve convergence. For a good tradeoff between simulation accuracy and computational efficiency, we propose a new nonparametric technique using the properties of the order statistics. It is generally applicable to any type of circuit irrespective of its power distribution function. Compared to the existing nonparametric technique, it is much more computationally efficient since it requires a much smaller sample size to achieve the same accuracy specification. This new technique is implemented in the distribution-independent power estimation tool (DIPE). DIPE is empirically demonstrated to be more robust and accurate than the parametric technique     

An empirical study of information technology enabled business process redesign and corporate competitive strategy

Business process redesign (BPR) has been widely touted as a means for leveraging the power of information technology to change business processes radically, resulting in substantial improvements in organizational effectiveness and efficiency. This study represents an early attempt at examining the strategic nature of the phenomenon. Because BPR is radical change and has the ability to alter both the competitive and operational nature of the corporation, it is critical that BPR be coordinated with corporate strategy. Through a survey of information system executives, the relationships between corporate competitive strategy and three types of BPR – intrafunctional, interfunctional and interorganizational – were examined. It was found that organizations following a cost strategy tended to do more BPR projects on interfunctional processes. Furthermore, the positive effect of a cost strategy on interfunctional BPR was found to be strengthened by the degree of integration of IS and business planning. It was also found that while interorganizational BPR was not related to a specific strategy, it was strongly related directly with IS–business planning integration.     

Microstructure and Mechanical Properties of Heat-treated GeSb_2Te_4 Thin Films

The effect of annealing on microstructure,adhesive and frictional properties of GeSb 2 Te 4 films were experimentally studied.The GeSb 2 Te 4 films were prepared by radio frequency(RF)magnetron sputtering,and annealed at 200℃and 340℃under vacuum circumstance,respectively.The adhesion and friction experiments were mainly conducted with a lateral force microscope(LFM)for the GeSb 2 Te 4 thin films before and after annealing.Their morphology and phase structure were analyzed by using atomic force microscopy(AFM)and X-ray Diffraction(XRD)techniques,and the nanoindention was employed to evaluate their hardness values.Moreover,an electric force microscope(EFM)was used to measure the surface potential. It is found that the deposited GeSb 2 Te 4 thin film undergoes an amorphous-to-fcc and fcc-to-hex structure transition;the adhesion has a weaker dependence on the surface roughness,but a certain correlation with the surface potential of GeSb 2 Te 4 thin films.And the friction behavior of GeSb 2 Te 4 thin films follows their adhesion behavior under a lower applied load.However,such a relation is replaced by the mechanical behavior when the load is relatively higher.Moreover,the GeSb 2 Te 4 thin film annealed at 340℃presents a lubricative property.     

Buckling experiments on steel silo transition junctions: I: Experimental results

Large elevated steel silos for the storage of bulk solids generally consist of a cylindrical vessel above a conical discharge hopper supported on a cylindrical skirt. The cone–cylinder–skirt transition junction is subject to a large circumferential compressive force which is derived from the horizontal component of the meridional tension in the conical hopper, so either a ring is provided or the shell walls are locally thickened to strengthen the junction. Extensive theoretical studies have examined the buckling and collapse strengths of these junctions, leading to theoretically based design proposals. However, no previous experimental study on steel silo transition junctions has been reported due to the considerable difficulties associated with testing these thin-shell junctions at model scale. This paper presents the results of a series of tests on cone–cylinder–skirt–ring junctions in steel silos under simulated bulk solid loading. In addition to the presentation of test results including geometric imperfections and failure behavior, the determination of buckling modes and loads based on displacement measurements is examined in detail.     

CETRAN系统中的英语词汇结构与功能

本文介绍了汉英机器翻译系统中从中间媒介语言生成英语的生成系统的词汇结构和功能，描述了生成系统各个层次之间的转换原理。为了说明清楚，在叙述中注意了列举从中间媒介中间媒介语言到目标语句的生成实例。