A new efficient dcvs circuit synthesis technique used for an improved implementation of a serial/parallel multiplier

This paper describes an efficient technique for the design of fault-secure VLSI circuits based on differential cascode voltage switch (DCVS) logic. We propose a new synthesis method for constructing DCVS circuits with a near-optimal transistor count based on binary decision diagrams (BDDs). the time and memory resources required are very low, making the technique practical even for PC-based synthesis tools. This method is the basis for a CAD tool that allows automatic synthesis of fault-secure circuits based on the DCVS technology. We finally present an improved design and implementation of a 2's complement serial/parallel multiplier as an application of the proposed technique and algorithm.     

Static fatigue of Hi-Nicalon™-S fiber at elevated temperature in air,steam, and silicic acid-saturated steam

A facility for testing SiC fiber tows in static fatigue and creep at elevated temperatures in air and steam was developed. Static fatigue of Hi-Nicalon™-S fibers was investigated at 800°C-1100°C at applied stresses between 115 and 1250 MPa in air, in Si(OH)₄(g)-saturated steam, and in unsaturated steam. Fibers tested in Si(OH)₄(g)-saturated steam and in air had silica scales throughout the test sections, but those tested in unsaturated steam did not develop scales near the steam injection point. Fiber lifetimes in static fatigue were shortest in unsaturated steam, intermediate in Si(OH)₄(g)-saturated steam, and longest in air. Failure strains did not exceed 0.3%. Steady-state strain rates and static fatigue lifetimes are modelled empirically by the Monkman-Grant relationship. Failure mechanisms are discussed.     

Length to diameter ratio of extrudates in catalyst technology I. Modeling catalyst breakage by impulsive forces

Natural or forced catalyst extrudate breakage is an important phenomenon during catalyst manufacture. Here, a two‐parameter model for predicting the reduction in the length to diameter ratio of catalyst extrudates due to breakage by impulsive forces as experienced in a laboratory drop test is developed. Part II will show how both parameters can be correlated with the strength of the extrudates and the severity of the drop test. For breakage by impulsive forces, the model reveals that extrudates are reduced in length to diameter ratio according to a pseudosecond‐order break law. Also, a tie‐in exists with the well‐known Golden Ratio that is famous for its inherent esthetic value. Applying the model to cases of “severity sequencing” and “severity conditioning” reveals the nonlinear behavior of the length to diameter ratio and yields results that are often nonintuitive and hard to get without this engineering analysis. © 2015 American Institute of Chemical Engineers AIChE J, 62: 639–647, 2016     

Bright two-photon emission and ultra-fast relaxation dynamics in a DNA-templated nanocluster investigated by ultra-fast spectroscopy

Metal nanoclusters have interesting steady state fluorescence emission, two-photon excited emission and ultrafast dynamics. A new subclass of fluorescent silver nanoclusters (Ag NCs) are NanoCluster Beacons. NanoCluster Beacons consist of a weakly emissive Ag NC templated on a single stranded DNA ("Ag NC on ssDNA") that becomes highly fluorescent when a DNA enhancer sequence is brought in proximity to the Ag NC by DNA base pairing ("Ag NC on dsDNA"). Steady state fluorescence was observed at 540 nm for both Ag NC on ssDNA and dsDNA; emission at 650 nm is observed for Ag NC on dsDNA. The emission at 550 nm is eight times weaker than that at 650 nm. Fluorescence up-conversion was used to study the dynamics of the emission. Bi-exponential fluorescence decay was recorded at 550 nm with lifetimes of 1 ps and 17 ps. The emission at 650 nm was not observed at the time scale investigated but has been reported to have a lifetime of 3.48 ns. Two-photon excited fluorescence was detected for Ag NC on dsDNA at 630 nm when excited at 800 nm. The two-photon absorption cross-section was calculated to be ～3000 GM. Femtosecond transient absorption experiments were performed to investigate the excited state dynamics of DNA-Ag NC. An excited state unique to Ag NC on dsDNA was identified at ～580 nm as an excited state bleach that related directly to the emission at 650 nm based on the excitation spectrum. Based on the optical results, a simple four level system is used to describe the emission mechanism for Ag NC on dsDNA.     

Cu(II), Co(II) and Ni(II) Complexes Installed on Functionalized Silica Surface for Hydrogen Peroxide Assisted Cyclohexane Oxidation

In this work, Cu(II), Co(II) and Ni(II) complexes of the Schiff base ((S,E)-2-(3,4-dimethoxybenzylideneamino)-3-(1H-imidazol-4-yl)propionic acid) were synthesized and subsequently anchored onto amine functionalized silica. They were characterized by FT-IR, UV–vis., ²⁹Si NMR, TG-DTG, ESR, FE-SEM and AFM techniques, and employed as catalysts in cyclohexane oxidation using hydrogen peroxide oxidant. Silica supported Cu(II) catalyst was shown the highest catalytic activity (70%) than rest of the catalysts used. On the other hand, all the complexes were selective as they yield only cyclohexanol and cyclohexanone. Silica supported catalysts were maintained their catalytic activity over five successive catalytic run. As these catalysts are selective, reusable and functioning well with hydrogen peroxide, they could design the environment friendly catalytic system for effective cyclohexane oxidation.     

Damage Characterization and Real-Time Health Monitoring of Aerospace Materials Using Innovative NDE Tools

The objective of this work is to characterize the damage and monitor in real-time aging structural components used in aerospace applications by means of advanced nondestructive evaluation techniques. Two novel experimental methodologies are used in this study, based on ultrasonic microscopy and nonlinear acoustics. It is demonstrated in this work that ultrasonic microscopy can be successfully utilized for local elastic property measurement, crack-size determination as well as for interfacial damage evaluation in high-temperature materials, such as metal matrix composites. Nonlinear acoustics enables real-time monitoring of material degradation in aerospace structures. When a sinusoidal ultrasonic wave of a given frequency and of sufficient amplitude is introduced into a nonharmonic solid, the fundamental wave distorts as it propagates, and therefore the second and higher harmonics of the fundamental frequency are generated. Measurements of the amplitude of these harmonics provide information on the coefficient of second- and higher-order terms of the stress–strain relation for a nonlinear solid. It is shown in this article that the material bulk nonlinear parameter for metallic alloy samples at different fatigue levels exhibits large changes compared to linear ultrasonic parameters, such as velocity and attenuation.     

Formation of Titanium Nitride Whiskers by Reaction of Sodium Titanium Bronze with Molten Sodium Cyanide

The production of titanium nitride, TiN, whiskers by reaction of sodium titanium bronze, Na_xTiO₂ (STB), with excess sodium cyanide, NaCN, at 1000°C is reported. The solubility of Ti from a STB in molten NaCN has been estimated experimentally. The TiN whiskers obtained under different experimental conditions have been examined by scanning electron microscopy and analyzed by analytical electron microscopy.     

A biosocial developmental model of borderline personality: Elaborating and extending linehan’s theory.

Over the past several decades, research has focused increasingly on developmental precursors to psychological disorders that were previously assumed to emerge only in adulthood. This change in focus follows from the recognition that complex transactions between biological vulnerabilities and psychosocial risk factors shape emotional and behavioral development beginning at conception. To date, however, empirical research on the development of borderline personality is extremely limited. Indeed, in the decade since M. M. Linehan initially proposed a biosocial model of the development of borderline personality disorder, there have been few attempts to test the model among at-risk youth. In this review, diverse literatures are reviewed that can inform understanding of the ontogenesis of borderline pathology, and testable hypotheses are proposed to guide future research with at-risk children and adolescents. One probable pathway is identified that leads to borderline personality disorder; it begins with early vulnerability, expressed initially as impulsivity and followed by heightened emotional sensitivity. These vulnerabilities are potentiated across development by environmental risk factors that give rise to more extreme emotional, behavioral, and cognitive dysregulation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)